切削比能模型的建立及参数影响分析

中国机械工程 ›› 2015, Vol. 26 ›› Issue (8): 1098-1104.

切削比能模型的建立及参数影响分析

张洪潮;孔露露;李涛;陈俊超

大连理工大学，大连，116024

出版日期:2015-04-25 发布日期:2015-09-10
基金资助:
国家自然科学基金资助项目(5127507)；国家重点基础研究发展计划(973计划)资助项目(2011CB013406)

SCE Modeling and Influencing Trend Analysis of Cutting Parameters

Zhang Hongchao;Kong Lulu;Li Tao;Chen Junchao

Dalian University of Technology,Dalian,Liaoning,116024

Online:2015-04-25 Published:2015-09-10
Supported by:
National Natural Science Foundation of China（No. 5127507）;National Program on Key Basic Research Project (973 Program)（No. 2011CB013406）

摘要/Abstract

摘要：

从材料去除机理角度分析了材料去除过程中的能量耗散机理，并对材料去除能耗进行建模量化，推导出切削比能经验公式。根据试验数据拟合出端面车削的切削比能幂率公式，拟合度在95%以上。鉴于切削参数对切削比能影响的差异性，结合试验分析了切削三要素对切削比能的影响机理，研究结果为面向节能的切削工艺参数的制定及低碳制造量化评估清单数据要求提供了基础支持。

关键词: 材料去除, 切削能量耗散, 切削比能, 车削, 精益生产

Abstract:

This paper analyzed the energy consumption phenomenon with respect to the material removal mechanism and gave an empirical formula. An index formula was worked out based on the experimental data related to the facing processes performed on a turning machine. The influencing trends of cutting speed, feed rate and cutting depth on SCE were analyzed, which provides the basic indication for energy-saving machining parameters' selection and low-carbon manufacturing assessment inventory requirements.

Key words: material removal;cutting energy consumption;specific cutting energy(SCE);turning;lean , production

中图分类号:

TG511

张洪潮, 孔露露, 李涛, 陈俊超. 切削比能模型的建立及参数影响分析[J]. 中国机械工程, 2015, 26(8): 1098-1104.

Zhang Hongchao, Kong Lulu, Li Tao, Chen Junchao. SCE Modeling and Influencing Trend Analysis of Cutting Parameters[J]. China Mechanical Engineering, 2015, 26(8): 1098-1104.

导出引用管理器 EndNote|Ris|BibTeX

链接本文: https://www.cmemo.org.cn/CN/

https://www.cmemo.org.cn/CN/Y2015/V26/I8/1098

参考文献

[1]Matthew B，Gutowski T，Jones A，et al. A Thermodynamic Framework for Analyzing and Improving Manufacturing Processes[C]//IEEE International Symposium on Electronics and the Environment. San Francisco，USA,2008:212-217.
[2]Warren R D. Analysis of Material Removal Process[M].New York，USA：Springer-verlag，1992.
[3]Siemens.全面节能解决方案(TIES). [2012-02-24]. http://www.doc88.com/p-810688757233.html.
[4]Draganescu F，Gheorghe M，Doicin C V. Models of Machine Tool Efficiency and Specific Consumed Energy[J]. Journal of Materials Technology，2003，141：9-15.
[5]Gutowski T，Dahmus J，Thiriez A. Electrical Energy Requirements for Manufacturing Processes[C]//13th CIRP International Conference on Life Cycle Engineering.Leuven，Belgium,2006:121-125.
[6]Gutowski T. The Carbon and Energy Intensity of Manufacturing[C]//40th CIRP International Manufacturing Systems Seminar. Liverpool，UK,2007:23-32.
[7]Diaz N，Redelsheimer E，Dornfeld D. Energy Consumption Characterization and Reduction Strategies for Milling Machine Tool Use[C]//Proceedings of the 18th CIRP International Conference on Life Cycle Engineering.Brauschweig，Germany,2011：263-267.
[8]Li W，Kara S. An Experimental Model for Energy Consumption of Manufacturing Processes：a Case of Turning Process[J]. Journal of Engineering and Manufacturing，2011，225：1636-1649.
[9]Pawade R S. An Analytical Modelto Predict Specific Shear Energy in High-speed Turning of Inconel 718[J]. International Journal of Machine Tools and Manufacture，2009，49：979-990.
[10]Alessandro R R，Reginaldo T C. Influence of The Tool Edge Geometry on Specific Cutting Energy at High-Speed Cutting[J]. Journal of the Brazilian Society of Mechanical Sciences and Engineering，2007，29(3)：279-283.
[11]陈日曜. 金属切削原理[M]. 北京：机械工业出版社，2008.
[12]Tao Peng，Xun Xu. A Universal Hybrid Energy Consumption Model for CNC Machining Systems[C]//20th CIRP International Conference on Life Cycle Engineering.Singapore，2013：251-256.
[13]Uluer M U，Kilic S E. A Model for Predicting Theoretical Process Energy Consumption of Rotational Parts Using STEP AP224 Features[C]//20th CIRP International Conference on Life Cycle Engineering.Singapore，2013：141-146.
[14]李涛，孔露露，张洪潮，等. 典型切削机床能耗模型的研究现状及发展趋势[J]. 机械工程学报,2014,50(7):102-111.
Li Tao,Kong Lulu,Zhang Hongchao,et al.Recent Research and Development of Typical Cutting Machine Tool’s Energy Consumption Model[J].Journal of Mechanical Engineering,2014,50(7):102-111.
[15]施金良，刘飞，许弟建,等. 数控机床空载运行时节能决策模型及实用方法[J]. 中国机械工程，2009，20(11)：1344-1346.
Shi Jinliang,Liu Fei,Xu Dijian,et al.Decision Model and Practical Method of Energy-saving in NC Machine Tool[J].China Mechanical Engineering,2009，20(11)：1344-1346.
[16]滕素珍，冯敬海.数理统计学[M].大连：大连理工大学出版社，2005.