一种新的铁道车辆滚振试验台曲线通过试验方法

中国机械工程 ›› 2015, Vol. 26 ›› Issue (24): 3391-3395.

一种新的铁道车辆滚振试验台曲线通过试验方法

汪群生1;曾京1;张传英1,2;魏来1

1.西南交通大学牵引动力国家重点实验室,成都,610031
2.南京高精齿轮集团有限公司,南京,210012

出版日期:2015-12-25 发布日期:2015-12-17
基金资助:
国家高技术研究发展计划（863计划）资助项目（2012AA112001）；国家自然科学基金高铁联合基金资助项目（U1334206）

A New Test Method of Curve Negotiation of Railway Vehicle on Roller Rig

Wang Qunsheng1;Zeng Jing1;Zhang Chuanying1,2;Wei Lai1

1.State Key Laboratory of Traction Power, Southwest Jiaotong University, Chengdu,610031
2.Nanjing High Speed & Accurate Gear Group Co. Ltd, Nanjing,210012

Online:2015-12-25 Published:2015-12-17

摘要/Abstract

摘要：

推导了车辆在通过曲线时的轮轨蠕滑率计算公式，并建立模拟铁道车辆曲线通过的滚振台非线性动力学模型，提出一种新的曲线通过台架试验方法，并分析了不同试验方法对车辆轮轨垂向力的影响。研究结果表明：滚动台上的车辆系统经由未平衡至平衡状态的过程中，现行的曲线通过试验方法冲击过大，而新的试验方法可以很好地避免这种冲击；将根据两种试验方法计算得到的安全性指标与曲线线路的结果进行对比可知，三者的变化规律一致；在两种试验方法的安全性指标对比中，新的试验方法与线路结果的误差更小，说明所提出的曲线通过试验方法是可行的。

关键词: 铁道车辆, 滚动台, 曲线通过；车辆系统动力学；试验方法

Abstract:

A formula was deduced to calculate the creepage between wheel and rail at curve negotiation. The nonlinear vehicle system dynamics model was established,which could simulate the curve negotiating property on roller rig.A new test method to simulate the curve negotiate was introduced and the influences of different test methods on wheel-rail vertical force were studied. Analysis results show that during the time of railway vehicle on roller rig from unstable to stable，the test method which is in operation nowadays may cause great detriment to both of the vehicle and the roller rig,while the new method can refrain it. Comparing the results calculated by two test methods with the model of
curve negotiation,all of the methods have the same laws with the increase of the vehicle speed. In the comparison of the safety index based on two test methods，the difference between the results calculated by the new method and the model of curve negotiation is smaller .It indicates that the new test method herein is feasible.

Key words: railway vehicle, roller rig；curve negotiating property, vehicle system dynamics；test method

中图分类号:

U279.3

汪群生, 曾京, 张传英, 魏来. 一种新的铁道车辆滚振试验台曲线通过试验方法[J]. 中国机械工程, 2015, 26(24): 3391-3395.

Wang Qunsheng, Zeng Jing, Zhang Chuanying, Wei Lai. A New Test Method of Curve Negotiation of Railway Vehicle on Roller Rig[J]. China Mechanical Engineering, 2015, 26(24): 3391-3395.

参考文献

[1]张卫华，黄丽湘，马启文,等.机车车辆动力性能的动态模拟[J].机械工程学报,2007,43(12)：114-119.
Zhang Weihua,Huang Lixiang,Ma Qiwen, et al. Dynamic Simulation on Dynamic Characteristics of Railway Vehicle[J].Chinese Journal of Mechanical Engineering,2007,43(12):114-119.
[2]陈良麒,张卫华,陈建政.机车车辆滚动台和试验方法[J].西南交通大学学报,1997,32（2）：208-213.
Chen Liangqi,Zhang Weihua,Chen Jianzheng.A Roller Testing Rig of Railway Vehicles and Its Testing Procedures[J].Journal of Southwest Jiaotong University,1997,32（2）：208-213.
[3]Allotta B,Pugi L,Malvezzi M,et al.A Scaled Roller Teat Rig for High-speed Vehicles[J].Vehicle System Dynamics,2010,48(S1):3-18.
[4]Jaschinski A,Chollet H,Iwnicki S,et al.The Application of Roller Rigs to Railway Vehicle Dynamics[J].Vehicle System Dynamics, 1999, 31(5/6):345-392.
[5]Bosso N,Zampieri N.Real-time Implementation of a Traction Control Algorithm on a Scaled Roller Rig[J].Vehicle System Dynamics, 2013, 51(4):517-541.
[6]Malvezzi M,Allotta B,Pugi L.Feasibility of Degraded Adhesion Tests in a Locomotive Roller Rig[J].Journal of Rail and Rapid, 2008, 222(1): 27-43.
[7]黄丽湘,张卫华,马启文,等.机车车辆动态模拟和台架试验[J].交通运输工程学报,2007,7(2):14-18.
Huang Lixiang,Zhang Weihua,Ma Qiwen,et al.Dynamic Simulation and Plant Test for Locomotive and Rolling Stock[J].Journal of Traffic and Transportation Engineering,2007,7(2):14-18.
[8]王金田,艾兴乔,滕万秀,等.滚动试验台惯性负载模拟及耦合振动分析[J].机车电传动,2014(4):79-82.
Wang Jintian,Ai Xingqiao,Teng Wanxiu,et al. Inertia Loads Simulation and Coupled Vibration Analysis of Roller Test Rig[J].Electric Drive Locomotive,2014(4):79-82.
[9]王福天.车辆系统动力学[M].北京：中国铁道出版社，1994.
[10]王开云,翟婉明,封全保.机车牵引状态下曲线通过导向特性研究[J].中国铁道科学,2006,27(2):71-76.
Wang Kaiyun,Zhai Wanming,Feng Quanbao.Study on the Steering Characteristics of Curve Negotiation under Locomotive Traction[J]. China Railway Science,2006,27(2):71-76.
[11]鲜荣.滚动振动试验台曲线通过试验方法研究[D].成都:西南交通大学,2004.