[1]邵飞,刘洪军,马颖,等.磨料水射流抛光技术及其发展[J].表面技术,2007,36(3):64-66.
Shao Fei,Liu Hongjun,Ma Ying,et al.Polishing Techniques and Development of Abrasive Water Jet[J].Surface Technology,2007,36(3):64-66.
[2]马占龙,刘健,王君林.射流抛光材料去除机理及影响因素分析[J].应用光学,2011,32(6):1206-1211.
Ma Zhanlong,Liu Jian,Wang Junlin.Material Removal Mechanism and Influence Factor of Fluid Jet Polishing[J].Journal of Applied Optics, 2011,32(6):1206-1211.
[3]张玲花.射流抛光用于纳米深度修形[J].光机电信息,2011,28(3):1-5.
Zhang Linghua.Jet Polishing for Nano-modification[J].OME Information,2011,28(3):1-5.
[4]方慧,郭培基,余景池.液体喷射抛光材料去除机理的研究[J].光学技术,2004,30(2):248-250.
Fang Hui,Guo Peiji,Yu Jingchi.Research on Material Removal Mechanism of Fluid Jet Polishing[J].Optical Technique,2004,30(2):248-250.
[5]Song Xiaozong,Zhang Yong,Zhang Feihu.Study on Removal Mechanism of Nanoparticle Colloid Jet Machining[J].Advanced Materials Research,2008,53/54:363-368.
[6]刘增文,黄传真,朱洪涛.高压磨料水射流加工中材料去除机理研究[J].金刚石与磨料磨具工程,2010,30(4):21-29.
Liu Zengwen,Huang Chuanzhen,Zhu Hongtao.Mechanism of Material Removal by High Pressure Abrasive Waterjet[J].Diamond & Abrasives Engineering,2010,30(4):21-29.
[7]施春燕,袁家虎,伍凡,等.射流抛光误差分析与材料去除稳定性研究[J].光学学报,2011,31(1):170-174.
Shi Chunyan,Yuan Jiahu,Wu Fan,et al.Research of Errors Analysis and Material Removal Stability in Fluid Jet Polishing[J].Acta Optica Sinica,2011,31(1):170-174.
[8]施春燕,袁家虎,伍凡,等.射流抛光喷嘴的设计[J].光电工程,2008,35(12):131-135.
Shi Chunyan,Yuan Jiahu,Wu Fan,et al.Nozzle Design of Fluid Jet Polishing[J].Opto-electronic Engineering,2008,35(12):131-135.
[9]Barletta M,Guarino S,Rubino G,et al.Progress in Fluidized Bed Assisted Abrasive Jet Machining (FB-AJM):Internal Polishing of Aluminium Tubes[J].International Journal of Machine Tools & Manufacture,2007,47(3/4):483-495.
[10]徐州浩通水射流科技有限公司.一种前混合磨料水射流磨料混合系统:中国,201410132350.3[P].2014-07-30.
[11]Beaucamp A,Namba Y.Super-smooth Finishing of Diamond Turned Hard X-ray Molding Dies by Combined Fluid Jet and Bonnet Polishing[J].CIRP Annals-Manufacturing Technology,2013,62(1):315-318.
[12]李天生,徐慧.一种磨削抛光装置的设计及其试验[J].机床与液压,2009,37(9):34-36.
Li Tiansheng,Xu Hui.The Design of Grinding and Polishing Device and Its Experimentation[J].Machine Tool & Hydraulics, 2009, 37(9):34-36.
[13]Orbanic H,Junkar M,Bajsic I,et al.An Instrument for Measuring Abrasive Water Jet Diameter[J].International Journal of Machine Tools & Manufacture,2009,49(11):843-849.
[14]Rabani A,Marinescu I,Axinte D.Acoustic Emission Energy Transfer Rate:A Method for Monitoring Abrasive Waterjet Milling[J]. International Journal of Machine Tools & Manufacture,2012,61:80-89.
[15]Fan J,Li H,Wang J,et al.A Study of the Flow Characteristics in Micro-abrasive Jets[J].Experimental Thermal and Fluid Science, 2011,35(6):1097-1106.
[16]Narayanan C,Balz R,Weiss D A,et al.Modelling of Abrasive Particle Energy in Water Jet Machining[J].Journal of Materials Processing Technology,2013,213(12):2201-2210.
[17]Wang J.Particle Velocity Models for Ultra-high Pressure Abrasive Waterjets[J].Journal of Materials Processing Technology, 2009, 209(9):4573-4577.
[18]Manu R,Babu N.An Erosion-based Model for Abrasive Waterjet Turning of Ductile Materials[J].Wear,2009,266(11/12):1091-1097.
[19]Kumar N,Shukla M.Finite Element Analysis of Multi-particle Impact on Erosion in Abrasive Water Jet Machining of Titanium Alloy[J]. Journal of Computational and Applied Mathematics,2012,236(18):4600-4610.
[20]Tyagi R.Abrasive Jet Machining by Means of Velocity Shear Instability in Plasma[J].Journal of Manufacturing Processes, 2012, 14(3): 323-327.
[21]Azmir M A,Ahsan A K.Investigation on Glass/Epoxy Composite Surfaces Machined by Abrasive Water Jet Machining[J].Journal of Materials Processing Technology,2008,198(1/3):122-128.
[22]Chen Tianxiang,Wang Chengyong.Investigation into Roughness of Surface Polished by Abrasive Waterjetwith Taguchi Method and Dimensional Analysis[J].Materials Science Forum,2013,723:188-195.
[23]Che Cuilian,Huang Chuanzhen,Wang J,et al.Theoretical Model of Surface Roughness for Polishing Super Hard Materials with Abrasive Waterjet[J].Key Engineering Materials,2008,375/376:465-469.
[24]Getu H,Ghobeity A,Spelt J,et al.Abrasive Jet Micro-machining of Polymethylmethacrylate[J].Wear,2007,263(7/12):1008-1015.
[25]Ma C,Deam R.A Correlation for Predicting the Kerf Profile from Abrasive Water Jet Cutting[J].Experimental Thermal and Fluid Science, 2006,30(4):337-343.
[26]陈林,雷玉勇,郭宗环,等.基于FLUENT的后混合磨料水射流喷嘴内流场的数值模拟[J].润滑与密封,2012,37(4):66-69.
Chen Lin,Lei Yuyong,Guo Zonghuan,et al.Numerical Simulation of Post.Mixed Abrasive Water Jet Nozzle Based on Fluent[J]. Lubrication Engineering, 2012,37(4):66-69.
[27]刘国勇,陈欣欣,朱冬梅,等.前混合磨料水射流除鳞喷嘴混合腔内部流场[J].北京科技大学学报,2014,36(6):830-837.
Liu Guoyong,Chen Xinxin,Zhu Dongmei,et al.Internal Mixing Chamber Flow Field of a Premixed Abrasive Water Jet Descaling Nozzle[J]. Journal of University of Science and Technology Beijing,2014,36(6):830-837.
[28]Burzynski T,Papini M.Modelling of Surface Evolution in Abrasive Jet Micro-machining Including Particle Second Strikes:A Level Set Methodology[J].Journal of Materials Processing Technology,2012,212(5):1177-1190.
[29]潘峥正,万庆丰,雷玉勇,等.基于后混合式磨料水射流磨料颗粒运动研究[J].机床与液压,2014,42(9):109-112.
Pan Zhengzheng,Wan Qingfeng,Lei Yuyong,et al.Research on Motion of Abrasive in Post-mixed Abrasive Water Jet[J].Machine Tool & Hydraulics,2014,42(9):109- 112.
[30]杨国来,周文会,刘肥.基于 FLUENT的高压水射流喷嘴的流场仿真[J].兰州理工大学学报,2008,34(2):49-52.
Yang Guolai,Zhou Wenhui,Liu Fei.Simulation of Flow Field of High Pressure Water Jet from Nozzle with Fluent[J].Journal of Lanzhou University of Technology,2008,34(2):49-52.
[31]陆金刚,龚辰,闫龙龙,等.高速水射流集束性的数值模拟及试验研究[J].工程热物理学报,2014,35(8):1526-1529.
Lu Jingang,Gong Chen,Yan Longlong,et al.Numerical Simulation and Experimental Study of the Coherence of High-speed Water Jet[J]. Journal of Endineering Thermophysics,2014,35(8):1526-1529.
[32]李兆泽,李圣怡,戴一帆,等.磨料射流抛光中各工艺参数对材料去除率及抛光区形貌的影响[J].中国机械工程,2008,19(21):2532-2535.
Li Zhaoze,Li Shengyi,Dai Yifan,et al.Effects of Various Parameters on Material Removal Rate and the Footprint in Abrasive Jet Polishing Process[J].China Mechanical Engineering,2008,19(21):2532-2535.
[33]Tsai F,Yan B,Kuan C,et al. A Taguchi and Experimental Investigation into the Optimal Processing Conditions for the Abrasive Jet Polishing of SKD61 Mold Steel[J].International Journal of Machine Tools & Manufacture,2008,48(7/8):932-945.
[34]Azmir M,Ahsan A.A Study of Abrasive Water Jet Machining Process on Glass/Epoxy Composite Laminate[J].Journal of Materials Processing Technology,2009,209:6168-6173.
[35]Jafar R H M,Spelt J,Papini M.Surface Roughness and Erosion Rate of Abrasive Jet Micro-machined Channels: Experiments and Analytical Model[J].Wear,2013,303(1/2):138-145.
[36]施春燕,袁家虎,伍凡,等.喷射距离对射流抛光去除函数的影响[J].红外与激光工程,2011,40(4):685-689.
Shi Chunyan,Yuan Jiahu,Wu Fan,et al.Influence of Stand Distance on Material Removal Function Fluid Jet Polishing[J].Infrared and Laser Engineering,2011,40(4):685-689.
[37]袁卓林,雷玉勇,孙书蕾,等.微磨料水射流对工件表面抛光作用的研究[J]. 机床与液压,2010,38(21):4-6.
Yuan Zhuolin,Lei Yuyong,Sun Shulei,et al.Study on Surface Polishing Using Micro Abrasive Water Jet[J].Machine Tool & Hydraulics, 2010, 38(21):4-6.
[38]Fowler G,Pashby I,Shipway P.The Effect of Particle Hardness and Shape When Abrasive Water Jet Milling Titanium Alloy Ti6Al4V[J]. Wear,2009,266(7/8):613-620.
[39]施春燕,袁家虎,伍凡,等.冲击角度对射流抛光中材料去除面形的影响分析[J].光学学报,2010,30(2):513-517.
Shi Chunyan,Yuan Jiahu,Wu Fan,et al.Influence Analysis of Impact Angle on Material Removal Profile in Fluid Jet Polishing[J]. Acta Optica Sinica,2010,30(2):513-517.
[40]Ally S,Spelt J,Papini M.Prediction of Machined Surface Evolution in the Abrasive Jet Micro-machining of Metals[J]. Wear, 2012, 292/293: 89-99.
[41]Palleda M.A Study of Taper Angles and Material Removal Rates of Drilled Holes in the Abrasive Water Jet Machining Process[J]. Journal of Materials Processing Technology,2007,189(1/3):292-295.
[42]Yan B H,Tsai F,Sun L,et al.AbrasiveJet Polishing on SKD61 Mold Steel using SiC Coated with Wax[J].Journal of Materials Processing Technology,2008,208(1/3):318-329.
[43]Mimura H,Yumoto H,Matsuyama S,et al.Surface Figuring and Measurement Methods with Spatial Resolution Close to 0.1mm for X-ray Mirror Fabrication[C]//Advances in Metrology for X-ray and EUV Optics,Proceedings of SPIE Vol.5921. San Diego, CA:SPIE, 2005:1-8.
[44]Zhang Feihu,Song Xiaozong,Zhang Yong,et al.Figuring of an Ultra-smooth Surface in Nanoparticle Colloid Jet Machining[J].Journal of Micromechanics and Microengineering,2009,19(5):1-6.
[45]Wang Junlin,Ultra-precision Optical Fabrication on Fused Silica[C]//6th International Symposium on Advanced Optical Manufacturing and Testing Technologies:Advanced Optical Manufacturing Technologies. Proceedings of SPIE Vol.8416.Xiamen,2012:1-6.
[46]宋岳干,宋丹路,王堃.后混合磨料水射流对金属的抛光机制及实验研究[J].机床与液压,2013,41(3):17-20.
Song Yuegan,Song Danlu,Wang Kun.Experimental Study of the Metal Polishing Mechanism of the Post Mixed Abrasive Water Jet[J]. Machine Tool & Hydraulics,2013,41(3):17-20.
[47]Boud F,Loo L F,Kinnell P K.The Impact of Plain Waterjet Machining on the Surface Integrity of Aluminium 7475[J]. Procedia CIRP,2014,13:382-386. |