产品制造过程碳足迹核算及其优化问题

中国机械工程 ›› 2015, Vol. 26 ›› Issue (17): 2336-2343.

产品制造过程碳足迹核算及其优化问题

刘琼1,2;田有全1;John W. Sutherland2;周迎冬1

1.华中科技大学数字制造装备与技术国家重点实验室,武汉,430074
2.Purdue University, West Lafayette, 47906, USA

出版日期:2015-09-10 发布日期:2015-09-14
基金资助:
国家自然科学基金重点资助项目（51035001）;国家自然科学基金资助项目（51275190）;中央高校基本科研业务费专项资金资助项目（2013ZZGH002）

Calculation and Optimization of Product Carbon Footprint in Its Manufacturing Processes

Liu Qiong1,2;Tian Youquan1;John W. Sutherland2;Zhou Yingdong1

1.State Key Laboratory of Digital Manufacturing Equipment & Technology,Huazhong University of Science and Technology,Wuhan,430074
2.Purdue University,West Lafayette,47906,USA

Online:2015-09-10 Published:2015-09-14
Supported by:
National Natural Science Foundation of China（No. 51035001, 51275190）;Fundamental Research Funds for the Central Universities( No. 2013ZZGH002)

摘要/Abstract

摘要：

为了减少各产品在制造过程中的碳足迹，并为未来产品碳标签核算提供较为准确的计算方法，提出了一种基于制造过程碳排放与被加工产品之间对应关系的产品制造过程碳足迹计算方法;针对柔性作业车间，为减少产品制造过程碳足迹，并保证完工时间以及车间设备利用率，提出了一种以所有产品制造过程碳足迹总和最短、最长完工时间最短、车间设备利用率最大的多目标优化调度模型;设计了第二代非支配解遗传算法进行求解，与传统调度模型的对比说明，所提出的优化调度模型在完工时间损失不大并保证车间设备利用率有改善时，可以使所有产品制造过程碳足迹有较大的改善，从而验证了研究的有效性。

关键词: 低碳制造, 柔性作业车间调度, 碳排放, 产品制造过程碳足迹

Abstract:

In order to accurately quantify product carbon footprint in its manufacturing processes for multi-varieties manufacturing companies and to provide a more accurate calculating method of product carbon labelling,a calculating method of product carbon footprint in its manufacturing processes was proposed,which was based on mapping relations among carbon emissions in manufacturing processes and products manufactured.In order to reduce the product carbon footprint in its manufacturing processes for a flexible job-shop,a multi-objective model aiming at minimizing the total product carbon footprint in manufacturing processes,minimizing complete time and maximizing workshop equipment utilization was proposed.NSGA-II(non-dominated sorting genetic algorithm-II) was designed to solve the model.By comparing with the traditional scheduling model,the proposed model can provide a result with much less total product carbon footprint in manufacturing processes but almost the same complete time and workshop equipment utilization.Therefore,the effectiveness of the research was verified by the case study.

Key words: low carbon manufacturing;job-shop , scheduling;carbon emission;carbon footprint of manufacturing process

中图分类号:

TP391

刘琼, 田有全, John W. Sutherland, 周迎冬. 产品制造过程碳足迹核算及其优化问题[J]. 中国机械工程, 2015, 26(17): 2336-2343.

Liu Qiong, Tian Youquan, John W. Sutherland, Zhou Yingdong. Calculation and Optimization of Product Carbon Footprint in Its Manufacturing Processes[J]. China Mechanical Engineering, 2015, 26(17): 2336-2343.

导出引用管理器 EndNote|Ris|BibTeX

链接本文: http://www.cmemo.org.cn/CN/

http://www.cmemo.org.cn/CN/Y2015/V26/I17/2336

参考文献

[1]Wiedmann T,Minx J.A Definition of Carbon Footprint[R].New York:Hauppauge NY,2008.
[2]尹瑞雪,曹华军,李洪丞,等.砂型铸造生产系统碳排放量化方法及应用[J].计算机集成制造系统,2012,18(5):1071-1076.
Yin Ruixue,Cao Huajun,Li Hongcheng,et al.Carbon Emission Quantification Method of Sand Casting Process and Its Application[J].Computer Intergrated Manufacturing Systems,2012,18(5):1071-1076.
[3]Peng Junxia, Zhao Yubo, Jiao Lihua, et al.CO2 Emission Calculation and Reduction Options in Ceramic Tile Manufacture-The Foshan Case[J]. Energy Procedia, 2012, 16: 467-476.
[4] 李聪波,崔龙国,刘飞,等.面向高效低碳的数控加工参数多目标优化模型[J].机械工程学报,2013,49(9):87-96.
Li Congbo,Cui Longguo,Liu Fei,et al.Multi-objective NC Machining Parameters Optimization Model for High Efficiency and Low Carbon[J].Journal of Mechanical Engineering,2013,49(9):87-96.
[5]何彦,刘飞,曹华军,等.面向绿色制造的机械加工系统任务优化调度模型[J].机械工程学报,2007,43(4):27-33.
He Yan,Liu Fei,Cao Huajun,et al.Job Scheduling Model of Machining System for Green Manufacturing[J].Journal of Mechanical Engineering,2007,43(4):27-33.
[6]Fang K,Uhan N,Zhao F,et al.A New Approach to Scheduling in Manufacturing for Power Consumption and Carbon Footprint Reduction[J].Journal of Manufacturing Systems,2011,30(4):234-240.
[7]GaBi Paper Clip Tutorial-Part 1: Introduction to LCA and Modeling Using GaBi. 2011,11.
[8]Deb K,Agrawal S,Pratap A,et al.A Fast Elitist Non-dominated Sorting Genetic Algorithm for Multi-objective Optimization: NSGA-Ⅱ[C]//Parallel Problem Solving from Nature PPSN VI.Paris,2000:849-858.
[9]张超勇,饶运清,刘向军,等.基于POX交叉的遗传算法求解Job-Shop调度问题[J].中国机械工程,2004,15(23):83-87.
Zhang Chaoyong,Rao Yunqing,Liu Xiangjun,et al.An Improved Genetic Algorithm for the Job Shop Scheduling Problem[J]. China Mechanical Engineering,2004,15(23):83-87.
[10]王凌.车间调度及其遗传算法[M].北京:清华大学出版社,2003.
[11]刘耀元.电工与电子技术[M].北京:北京工业大学出版社,2006.
[12]梁国熙,梁耀彰,陈海寿,等.香港中小企业碳审计工具箱[D].香港：香港大学,2010.

[1]	魏书鹏, 唐红涛, 李西兴, 杨冠宇, 张健. 考虑双资源约束的柔性机械加工车间逆调度问题研究[J]. 中国机械工程, 2024, 35(03): 457-471.
[2]	孙爱红, 宋豫川, 杨云帆, 雷琦. 考虑关键件加工质量的双资源约束车间调度算法[J]. 中国机械工程, 2022, 33(21): 2590-2600.
[3]	吕黎曙, 邓朝晖, 刘涛, 万林林, . 面向清洁生产的磨削工艺方案多层多目标优化模型及应用[J]. 中国机械工程, 2022, 33(05): 589-599.
[4]	李西兴, 杨道明, 李鑫, 吴锐, . 基于混合遗传鲸鱼优化算法的柔性作业车间自动导引车融合调度方法[J]. 中国机械工程, 2021, 32(08): 938-950，986.
[5]	李益兵1,2;黄炜星1;吴锐1. 基于改进人工蜂群算法的多目标绿色柔性作业车间调度研究[J]. 中国机械工程, 2020, 31(11): 1344-1350,1385.
[6]	杨宇;黄敏;王震宇;朱启兵. 利用有限制稳定配对策略求解双目标柔性作业车间调度问题[J]. 中国机械工程, 2018, 29(14): 1743-1750.
[7]	邓朝晖1,2;符亚辉1,2;万林林1,2;张华1,2. 面向绿色高效制造的铣削工艺参数多目标优化[J]. 中国机械工程, 2017, 28(19): 2365-2372.
[8]	王秋成;魏瑞晖;张启炯. 废旧轿车无级变速箱再制造工艺的碳排放评估[J]. 中国机械工程, 2017, 28(18): 2224-2230,2267.
[9]	张雷;蒋诗新;张伟伟. 三维模型驱动的零件切削过程碳排放评估[J]. 中国机械工程, 2017, 28(13): 1613-1619,1627.
[10]	张良, 王其东, 朱立红, 胡金芳. 开炼机绿色塑炼参数建模及多目标优化[J]. 中国机械工程, 2016, 27(18): 2500-2506.
[11]	朱传军 , 宋文家, 张超勇, 曹静 , 朱孟周. 基于维修时间窗的柔性作业车间调度优化研究[J]. 中国机械工程, 2016, 27(10): 1337-1343.
[12]	赵敏, 殷欢, 孙棣华, 郑林江, 何伟, 袁川. 基于改进人工鱼群算法的柔性作业车间调度[J]. 中国机械工程, 2016, 27(08): 1059-1065.
[13]	彭建刚, 刘明周, 张玺, 张铭鑫, 葛茂根. 基于Pareto优化的离散自由搜索算法求解多目标柔性作业车间调度问题[J]. 中国机械工程, 2015, 26(5): 620-626.
[14]	巴黎, 李言, 曹源, 杨明顺, 刘永. 考虑批量装配的柔性作业车间调度问题研究[J]. 中国机械工程, 2015, 26(23): 3200-3207.
[15]	宋文家, 张超勇, 尹勇, 邵新宇. 基于多目标混合殖民竞争算法的设备维护与车间调度集成优化[J]. 中国机械工程, 2015, 26(11): 1478-1487.