双足反向型直线超声电机的优化设计及性能仿真

摘要/Abstract

摘要：

为实现成对微部件反向同步动作的精密定位，设计了一种双足反向型直线超声电机。该电机以矩形板面内一阶纵振和二阶弯振模态为工作模态，通过三角形结构将激励振动放大并在驱动足位置形成椭圆运动，从而驱动两滑条实现反向直线输出。基于工作频率一致性要求进行了电机结构优化，采用谐响应分析验证了设计的可行性。建立定子滑条刚柔接触有限元模型，实现了电机输出性能的仿真。仿真结果说明该电机具有较好的稳定性，空载速度和输出推力分别达到120mm/s和30N。

关键词: 直线超声电机, 有限元法, 面内模态, 性能仿真, 优化设计

Abstract:

A new linear ultrasonic motor with reverse double foot was presented to precisely positioning a pair of micro components with inverse synchronized actions. The motor used the first longitudinal and the second bending vibration modes of rectangular plate in-plane as working mode. Excited vibrations amplified by triangular structure were superposed at double foot to form elliptical trajectories, which drove rotors to obtain linear outputs with opposite directions. Motor structural optimization were carried out to achieve the consistency of working frequencies, and harmonic response was analyzed to verify the feasibility of motor design. Motor output performance simulation were performed by rigid-soft contact finite element model of stator and rotor. The simulation results show that the motor presented has a desired stability, and the moving speed and the thrust force can reach 120mm/s and 30N respectively.

Key words: linear ultrasonic motor, finite element method, mode in-plane, performance simulation, optimization design

中图分类号:

TM38

孙士平, 胡政. 双足反向型直线超声电机的优化设计及性能仿真[J]. 中国机械工程, 2015, 26(13): 1783-1788.

Sun Shiping, Hu Zheng. Optimization Design and Performance Simulation of Reverse Double Foot Linear Ultrasonic Motor[J]. China Mechanical Engineering, 2015, 26(13): 1783-1788.

导出引用管理器 EndNote|Ris|BibTeX

链接本文: https://www.cmemo.org.cn/CN/

https://www.cmemo.org.cn/CN/Y2015/V26/I13/1783

参考文献

[1]Uchino K.Piezoelectric Ultrasonic Motors Overview[J]. Smart Materials and Structures，1998，7(3)：273-285.
[2]赵淳生. 超声电机技术与应用[M]. 北京：科学出版社出版，2007.
[3]Hemsel T，Wallaschek J. Survey of the Present State of the Art of Piezoelectric Linear Motors[J]. Ultrasonics, 2000，38(1/8)：37-40.
[4]Jeong S，Park C，Park T. Optimal Design of V- type Ultrasonic Motor[J]. Journal of Central South University of Technology，2010，17(6)：1247-1250.
[5]Shi Yunlai，Zhao Chunsheng. A New Standing– wave-type Linear Ultrasonic Motor Based on In-plane Modes[J]. Ultrasonics，2011，51(4)：397-404.
[6]辜承林，董干. 双π型压电超声波直线电机[J]. 中国电机工程学报，1998，18(2)：96-99.
Gu Chenglin，Dong Gan. Double π-type Linear Piezoelectric Ultrasonic Motor[J]. Proceedings of the CSEE，1998，18(2)：96-99.
[7]许海，李洁，赵淳生. 双足型直线超声电机的设计及实验[J]. 中国机械工程，2005，16(3)：243-245.
Xu Hai，Li Jie，Zhao Chunsheng. Design and Experiment of Double Foot Liner Ultrasonic Motor[J]. China Mechanical Engineering，2005，16(3)：243-245.
[8]许海. 双足型直线超声电机的原理分析及结构设计[J]. 机械设计与制造，2007(5)：48-50.
Xu Hai. The Double Foots Liner Ultrasonic Motor’s Theory of Operation and Structure[J]. Machinery Design & Manufacture，2007(5)：48-50.
[9]陈强，胡敏强，金龙，等. 弯纵复合大推力直线超声波电机[J]. 电工技术学报，2007，22(11)：35-40.
Chen Qiang，Hu Minqiang，Jin Long，et al. Large Thrust Linear Ultrasonic Motor Using Bending and Longitudinal Vibration Modes[J]. Transactions of China Electrotechnical Society，2007，22(11)：35-40.
[10]李玉宝，时运来，赵淳生，等. 高速大推力直线型超声电机的设计与实验研究[J].中国电机工程学报，2008，28(33)：49-53.
Li Yubao，Shi Yunlai，Zhao Chunsheng，et al. Research on Linear Ultrasonic Motor with High Speed and Large Thrust Force[J]. Proceedings of the CSEE，2008，28(33)：49-53.
[11]胡金云，鹿存跃，陈宇，等. 双振子型直线超声电机[J]. 清华大学学报(自然科学版)，2008，48(8)：1236-1239.
Hu Jinyun，Lu Cunyue，Chen Yu，et al. Double-vibrator Linear Piezoelectric Ultrasonic Motor[J]. Journal of Tsinghua University (Science and Technology)，2008，48(8)：1236-1239.
[12]石胜君，陈维山，刘军考，等. 大推力推挽纵振弯纵复合直线超声电机[J]. 中国电机工程学报，2010，30(9)：55-61.
Shi Shengjun，Chen Weishan，Liu Junkao，et al. A High Power Ultrasonic Linear Motor Using Push-pull Longitudinal and Bending Multimode Transducer[J]. Proceedings of the CSEE，2010，30(9)：55-61.
[13]万志坚，胡泓. 面内弯纵型直线超声电机的数学模型与实验研究[J]. 压电与声光，2013，35(2)：229-233.
Wan Zhijian，Hu Hong. The Mathematical Model and Experimental Study on Linear Ultrasonica Motor Using Longitudinal and Bending Mode[J]. Piezoelectrics & Acoustooptics，2013，35(2)：229-233.
[14]郭吉丰，伍建国. 航天用大力矩高精度超声波电机研究[J]. 宇航学报，2004，25(1)：70-76.
Guo Jifeng，Wu Jianguo. Research on the High Torque and High Precision Ultrasonic Motor for Aerospace Application[J]. Journal of Astronautics，2004，25(1)：70-76.
[15]Kunnek M，Goldschmidt S，Wallaschek J. Theoretical and Experimental Studies of a Piezoelectric Ultrasonic Linear Motor with Respect to Damping and Nonlinear Material Behaviour[J]. Ultrasonics，1998，36(1/5)：103-109.
[16]Lerch R. Simulation of Piezoelectric Devices by Two- and Three-dimensional Finite Elements[J]. IEEE Transactions on Ultrasonics，Ferroelectrics，and Frequency Control，1990，37(2)：233-247.
[17]徐志科，胡敏强，金龙，等. 超声波电动机定子支撑对其性能影响的有限元分析[J]. 电工技术学报，2004，19(2)：10-14.
Xu Zhike，Hu Minqiang，Jin Long，et al. Finite Element Analysis of the Effect of Stator Support on Performance of an Ultrasonic Motor[J]. Transactions of China Electrotechnical Society，2004，19(2)：10-14.
[18]Rhoa J S，Leeb C H，Junga H K. Optimal Design of Ultrasonic Motor Using Evolution Strategy and Finite Element Method[J]. International Journal of Applied Electromagnetics and Mechanics，2007，25(1/4)：699-704.
[19]Flueckiger M，Fernandez J M，Perriard Y. Finite Element Method Based Design and Optimisation Methodology for Piezoelectric Ultrasonic Motors[J]. Mathematics and Computers in Simulation，2010，81(2)：446-459.
[20]Zhang Jiantao，Zhu Hua，Zhou Shengqiang，et al. Optimal Design of a Rod Shape Ultrasonic Motor Using Sequential Quadratic Programming and Finite Element Method[J]. Finite Elements in Analysis and Design，2012，59：11-17.
[21]周盛强，赵淳生. 超声电机接触界面的两种简化有限元模型[J]. 振动、测试与诊断，2009，29(3)：251-255.
Zhou Shengqiang，Zhao Chunsheng. Two Simplified Finite Element Methods for Contact Analysis of Ultrasonic Motor[J]. Journal of Vibration，Measurement & Diagnosis，2009，29(3)：251-255.
[22]Boungui G M，Loveday P W，Long C S. Development of a Novel Ultrasonic Motor Resonator Using Topology Optimization[J]. International Journal of Mechanics and Materials in Design，2011，7(1):45-53.