[1]张劲, 张士诚. 常规螺杆泵定子有限元求解策略[J].机械工程学报, 2004,40(5): 189-193.
Zhang Jin, Zhang Shicheng.FEM Analysis Policy For a General Screw-pump’s Stator[J].Chinese Journal of Mechanical Engineering, 2004,40(5): 189-193.
[2]万邦烈, 葛占玉. 单螺杆式水力机械的啮合理论及其作用力研究[J].石油学报, 1989,10(3): 97-108.
Wan Banglie, Ge Zhanyu.A Study on the Engagement Theory and the Dynamics of Single-Screwed Hydraulic Machinery[J]. Acta Petrolei Sinica, 1989,10(3): 97-108.
[3]李晓芳, 孙春龙, 李强. 螺杆泵定转子过盈接触三维有限元分析[J].润滑与密封, 2008,33(10): 64-65.
Li Xiaofang, Sun Chunlong, Li Qiang.3D-FEM Analysis of Stator-rotor Interference Fit Contact of Progressing Cavity Pump[J]. Lubrication Engineering, 2008,33(10): 64-65.
[4]杨兆春, 周海, 姚斌, 等. 单螺杆泵定子磨损分析[J].流体机械, 1999,27(7): 20-23.
Yang Zhaochun, Zhou Hai, Yao Bin,et al. Analysis of Single-screw Pump Stator Abrasion[J].Fluid Machinery, 1999,27(7): 20-23.
[5]金红杰, 吴恒安, 王秀喜. 螺杆泵腔室液压分布数值模拟研究[J].机床与液压, 2010,38(1): 92-94.
Jin Hongjie, Wu Hengan, Wang Xiuxi. Numerical Simulation on Cavity Pressure of Progressive Cavity Pump[J].Machine Tool & Hydraulics,2010,38(1): 92-94.
[6]叶卫东, 郭玉双, 杜秀华, 等. 螺杆泵内部压力分布规律研究[J].科学技术与工程, 2009,9(11): 3069-3072.
Ye Weidong, Guo Yushuang, Du Xiuhua, et al. Study on Pressure Law Inside of the Progressive Cavity Pump[J]. Science Technology and Engineering, 2009,9(11): 3069-3072.
[7]沙毅, 白小榜, 李金磊, 等. 单螺杆泵设计及特性试验研究[J].中国机械工程, 2008,19(5): 522-530.
Sha Yi, Bai Xiaobang, Li Jinlei, et al. Experimental Research on the Design and Performance of Single Screw Pump[J]. China Mechanical Engineering, 2008,19(5): 522-530.
[8]Regener T, Reich M, Duerholt R, et al. Latest Positive Displacement Motor and Drill Bit Developments for Drilling Hard and Abrasive Formations[C]//SPE/IADC Drilling Conference,SPE-92542-MS. Amsterdam,2005:644-653.
[9]陈玉祥, 王霞, 周松, 等. 提高螺杆泵定子橡胶材料寿命的分析与研究[J]. 排灌机械, 2005,23(4): 6-9.
Chen Yuxiang, Wang Xiang, Zhou Song, et al. Analyses on Improving the Life of the Screw Pum’s Stator Rubber[J]. Drainage and Irrigation Machinery, 2005,23(4): 6-9.
[10]韩传军, 邱亚玲, 刘清友, 等. 螺杆钻具等壁厚衬套性能分析[J].西南石油大学学报, 2008,30(4): 163-165.
Han Chuanjun, Qiu Yaling, Liu Qingyou,et al. Performance Analysis for Uniform Wall Thickness Bushing of PDM[J]. Journal of Southwest Petroleum University(Science & Technology Edition), 2008,30(4): 163-165.
[11]王伟, 邓涛, 赵树高. 橡胶Mooney-Rivlin模型中材料常数的确定[J].特种橡胶制品, 2004,25(4): 8-10.
Wang Wei, Deng Tao, Zhao Shugao. Determination for Material Constants of Rubber[J].Special Purpose Rubber Products, 2004,25(4): 8-10.
[12]Charlton D J,Yang J,Teh K K. A Review of Methods to Characterize Rubber Elastic Behavior for Use in Finite Element Analysis[J]. Rubber Chemistry and Technology, 1994,67: 481-503.
[13]Nicholson D W,Nelson N W. Finite-element Analysis in Design with Rubber[J].Rubber Chemistry and Technology, 1990, 63:368-406.
[14]Korunovic N, Trajanovic M, Stojkovic M. FEA of Tyres Subjected to Static Loading[J]. Journal of Serbian Society for Computational Mechanics, 2007,1(1):87-98. |