基于灰色关联和模糊聚类的机床温度测点优化

摘要/Abstract

摘要：

针对机床热误差补偿技术中温度测点优化选择的问题,提出采用基于灰色关联分析和模糊聚类分析相结合的方法对机床温度测点进行优化选择。采用灰色关联分析法计算温度变量与主轴热误差之间的相关系数，并据此优选温度变量，采用模糊聚类分析法对所选择的温度变量进行聚类,确定关键温度变量，结合关键温度变量建立热误差线性回归模型。在精密卧式加工中心MCH63上对该方法进行了试验验证，结果表明，温度测点的数量由29个减少到6个，机床轴向热误差由41.3μm减小到7.6μm。

关键词: 热误差, 灰色关联分析, 模糊聚类, 测点优化

Abstract:

A method combining grey correlation analysis and fuzzy clustering analysis was used to optimize the temperature measuring points of thermal error compensation for machine tools. Grey correlation coefficient between thermal errors and the temperature measuring points was computed by grey correlation analysis. The selected temperature measuring points optimized by grey correlation coefficient were classified by fuzzy clustering analysis to determine the key temperature variables. Linear regression model of thermal error was established with the key temperature variables. The method was tested in precision horizontal machining center MCH63. The results show that the number of temperature measuring points reduces from 29 to 6, the axial thermal error reduces from 41.3μm to 7.6μm.

Key words: thermal error, grey correlation analysis, fuzzy clustering analysis, optimization of measuring points

中图分类号:

TH161

张伟, 叶文华. 基于灰色关联和模糊聚类的机床温度测点优化[J]. 中国机械工程, 2014, 25(4): 456-460.

Zhang Wei, Ye Wenhua. Optimization of Temperature Measuring Points for Machine Tools Based on Grey Correlation and Fuzzy Clustering Analysis[J]. China Mechanical Engineering, 2014, 25(4): 456-460.

参考文献

[1]倪军.数控机床误差补偿研究的回顾及展望[J].中国机械工程,1997,8(1):29-33.
Ni Jun.A Perspective Review of CNC Machine Accuracy Enhancement through Real-time Error Compensation[J].China Mechanical Engineering,1997,8(1):29-33.
[2]Ramesh R,Mannan M A,Poo A N.Error Compensation in Machine Tools—a Review Part Ⅱ:Thermal Errors[J]. International Journal of Machine Tools & Manufacture,2000,40(9):1257-1284.
[3]Yang S,Yuan J,Ni J.Accuracy Enhancement of a Horizontal Machining Center by Real-time Error Compensation[J]. Journal of Manufacturing Systems,1996,15(2):113-124.
[4]Yang J G,Yuan J X,Ni J.Thermal Error Mode Analysisand Robust Modeling for Error Compensation on a CNC Turning Center[J].International Journal of Machine Tools & Manufacture,1999,39:1367-1381.
[5]沈金华,赵海涛,张宏韬,等.数控机床热补偿中温度变量的选择与建模[J].上海交通大学学报,2006,40(2):181-184.
Shen Jinhua,Zhao Haitao,Zhang Hongtao,et al.The Selection and Modeling of Temperature Variables for the Thermal Error Compensation on Machine Tools[J].Journal of Shanghai Jiaotong University,2006,40(2):181-184.
[6]闫嘉钰,张宏韬,刘国良.基于灰色综合关联度的数控机床热误差测点优化新方法及应用[J].四川大学学报, 2008, 40(2): 160-164.
Yan Jiayu,Zhang Hongtao,Liu Guoliang.Application of a New Optimizing Method for the Measuring Points of CNC Machine Thermal Error Based on Grey Synthetic Degree of Association[J].Journal of Sichuan University, 2006, 40(2): 2030-2033.
[7]凡志磊,李中华,杨建国.基于偏相关分析的数控机床温度布点优化及其热误差建模[J].中国机械工程,2010,21(17):2025-2028.
Fan Zhilei,Li Zhonghua,Yang Jianguo.NC Machine Tool Temperature Measuring Point Optimization and Thermal Error Modeling Based on Partial Correlation Analysis[J].China Mechanical Engineering,2010,21(17):2025-2028.
[8]李郝林,应杏娟.数控机床主轴系统热误差温度测量点的最优化设计方法[J].中国机械工程,2010,21(7):804-808.
Li Haolin,Ying Xingjuan.A Design Method of Temperature Measurement Points for Thermal Error of Machine Spindle[J]. China Mechanical Engineering,2010,21(7):804-808.
[9]Ma Youji.Sensor Placement Optimization for Thermal Error Compensation on Machine Tools[D].Michigan:University of Michigan,2001.
[10]Lee J H,Yang S H.Statistical Optimization and Assessment of a Thermal Error Model for CNC Machine Tools[J]. International Journal of Machine Tools & Manufacture,2002,42:147-155.
[11]Creighton E,Honegger A,Tulsian D.Analysis of Thermal Errors in a High-speed Micro-milling Spindle[J].International Journal of Machine Tools & Manufacture,2010,50:386-393.
[12]刘思峰,郭天榜,党耀国.灰色系统理论及其应用[M].北京:科学出版社,1999.
[13]章婷,叶文华,梁睿君,等.数控机床热误差变参数GM(1,1)的建模[J].中南大学学报,2012,43(1):165-170.
Zhang Ting,Ye Wenhua,Liang Ruijun,et al.Thermal Error Modeling of Numerical Control Machine Based on Grey GM(1,1) Model with Variable Parameters[J].Journal of Central South University,2012,43(1):165-170.

[1]	黄智, 刘永超, 邓涛, 周涛, 祝云. [误差建模及精度保证方法]一种五轴数控机床热误差建模方法[J]. 中国机械工程, 2020, 31(13): 1529-1538.
[2]	苗恩铭1;吕玄玄2;魏新园2;宋先进2;董云飞2. 基于状态空间模型的数控机床热误差建模[J]. 中国机械工程, 2019, 30(09): 1049-1055,1064.
[3]	张春亮;陈铭. 基于拆解难度和模糊聚类的泛化报废汽车拆解成本预测[J]. 中国机械工程, 2019, 30(07): 840-845.
[4]	苗恩铭;魏新园;刘辉;潘巧生. 有源相控阵雷达阵面热变形预测建模理论[J]. 中国机械工程, 2018, 29(19): 2342-2346.
[5]	郑建新;任元超. 7050铝合金二维超声滚压加工表面完整性综合评价[J]. 中国机械工程, 2018, 29(13): 1622-1626.
[6]	苗恩铭, 徐建国, 吕玄玄, 魏新园. 数控机床工作台误差综合补偿方法研究[J]. 中国机械工程, 2017, 28(11): 1326-1332.
[7]	苗恩铭, 刘义, 杨思炫, 陈维康. 无偏估计拆分算法在数控加工中心主轴热误差建模中的应用[J]. 中国机械工程, 2016, 27(16): 2131-2136.
[8]	苗恩铭, 高增汉, 党连春, 苗继超. 数控机床热误差特性分析[J]. 中国机械工程, 2015, 26(8): 1078-1084.
[9]	张成新, 高峰, 李艳. 基于实时反馈的机床热误差在线补偿模型[J]. 中国机械工程, 2015, 26(3): 361-365.
[10]	要小鹏, 殷国富, 李光明. 基于OE-CM算法的机床主轴热误差建模与补偿分析[J]. 中国机械工程, 2015, 26(20): 2757-2762.
[11]	陈加明, 宋小文, 徐浩. 结合模糊聚类和合作竞争博弈的优化方法[J]. 中国机械工程, 2015, 26(16): 2179-2182.
[12]	朱文博, 戚丽杰, 陈龙. 基于骨架和灰色关联分析相结合的机械零件三维模型检索[J]. 中国机械工程, 2015, 26(14): 1926-1931,1937.
[13]	张淑清, 包红燕, 李盼, 李新新, 姜万录. 基于RQA与GG聚类的滚动轴承故障识别[J]. 中国机械工程, 2015, 26(10): 1385-1390.
[14]	孟宗, 王亚超, 王晓燕, . 基于DLMD样本熵和模糊聚类的滚动轴承故障诊断[J]. 中国机械工程, 2014, 25(19): 2634-2641.
[15]	余文利, 姚鑫骅, 傅建中, 孙磊. 贝叶斯证据框架下的LS-SVM多工况数控机床热误差建模[J]. 中国机械工程, 2014, 25(17): 2361-2368.