[1]任敬心,康仁科,王西彬.难加工材料磨削技术[M].北京:电子工业出版社,2011.
[2]Hahn R S,Lindsay R P.Principles of Grinding(Part Ⅰ).Basic Relationships in Precision Grinding[J]. Machinery, 1971, 77(7): 55-62.
[3]Kumar S,Choudhury S K.Prediction of Wear and Surface Roughness in Electro-discharge Diamond Grinding[J].Journal of Materials Processing Technology,2007,191:206-209.
[4]Hecker R L,Liang S Y,et al.Predictive Modeling of Surface Roughness in Grinding[J].International Journal of Machine Tools & Manufacture,2003,43:755-761.
[5]Xu Xipeng, Yu Yiqing, Xu Hongjun. Effect of Grinding Temperatures on the Surface Integrity of a Nickel-based Superalloy[J]. Journal of Materials Processing Technology,2002,129(1/3):359-363.
[6]Xu Xipeng,Yu Yiqing,Huang Hui.Mechanisms of Abrasive Wear in the Grinding of Titanium(TC4) and Nickel(K417) Alloys[J]. Wear,2003,255(7/12):1421-1426.
[7]黄伟,耿富荣,王衍学.磨削力和磨削表面粗糙度预测的新方法[J].航空制造技术,2005(2):75-78.
Huang Wei,Geng Furong,Wang Yanxue.New Approach for Predicting the Grinding Force and Surface Roughness of Grinding Works[J].Aeronautical Manufacturing Technology,2005(2):75-78.
[8]周志雄,毛聪,周德旺,等.平面磨削温度及其对表面质量影响的实验研究[J].中国机械工程,2008,19(8):980-984.
Zhou Zhixiong,Mao Cong,Zhou Dewang,et al.Experimental Investigation of Grinding Temperature and Its Effects on Surface Quality in Surface Grinding[J].China Mechanical Engineering,2008,19(8):980-984.
[9]康仁科,原京庭,任敬心.陶瓷结合剂CBN砂轮磨削难加工材料时磨削液的作用[J].西北工业大学学报,2000,18(4):527-530.
Kang Renke,Yuan Jingting,Ren Jingxin.Effect of Grinding Fluid on Grinding Properties of Vitrified Bonded CBN Wheel[J]. Journal of Northwestern Polytechnical University,2000,18(4):527-530.
[10]Chen Ming,Li Xiaotian,Sun Fanhong,et al.Studieson the Grinding Characteristics of Directionally So-lidified Nickel Based Super Alloy[J].Journal of Material Processing Technology,2001,116(2/3):165-169.
[11]黄新春,张定华,杨振朝,等.GH4169磨削表面粗糙度影响参数的敏感性研究[J].航空制造技术,2012,1(8):83-86.
Huang Xinchun,Zhang Dinghua,Yang Zhenchao,et al.Study of Sensitivity of Parameter Affecting Surface Roughness in Grinding Superalloy GH4169[J].Aeronautical Manufacturing Technology,2012,1(8):83-86. |