刀具磨损早期故障智能诊断研究

摘要/Abstract

摘要：

针对刀具的早期故障监测中因存在强烈的背景噪声而难以提取故障特征的问题,提出了基于二次采样随机共振消噪和B样条神经网络智能识别的故障诊断方法。首先利用在随机共振过程中，噪声增强振动信号的信噪比特性,将刀具振动信号进行随机共振输出,提取有效特征,再输入到B样条神经网络进行智能识别,进而获得刀具的磨损值。同时,为了得到与输入信号最佳匹配的随机共振参数,提出了基于遗传算法的多参数同步优化的自适应随机共振算法,克服了传统随机共振系统只实现单参数优化的缺点。实验结果表明，该方法能实现弱信号检测，能有效地应用于刀具磨损故障诊断中。

关键词: 随机共振, 遗传算法, 信噪比, B样条神经网络

Abstract:

In view of the difficulties of fault feature extraction from strong background noise in tool wear early fault diagnosis, a method was proposed based on twice sampling SR and B-spline neural network. First, SR was employed to remove noise in tool wear vibration signals because of its benefits for enhancing the signal-to-noise ratio, then, tool wears with the good fault features were identified by B-spline neural network. In order to improve the deficiency of a single parameter be optimized in the traditional SR and achieve the best SR parameters, an adaptive SR was proposed based on genetic algorithm, which realized multi-parameter synchronous optimization. The experimental results show that this method can realize the weak signal detection and apply to tool fault diagnosis effectively.

Key words: stochastic resonance(SR), genetic algorithm, signal-to-noise ratio, B-spline neural network

中图分类号:

TP164

曹伟青, 傅攀, 李晓晖. 刀具磨损早期故障智能诊断研究[J]. 中国机械工程, 2014, 25(18): 2473-2477.

Cao Weiqing, Fu Pan, Li Xiaohui. Early Fault Intelligent Diagnosis of Tool Wear[J]. China Mechanical Engineering, 2014, 25(18): 2473-2477.

参考文献

[1]袁静,何正嘉,訾艳阳.基于提升多小波的机电设备复合故障分离和提取[J]. 机械工程学报,2010,46(1):79-85.
Yuan Jing,He Zhengjia,Zi Yanyang.Separation and Extraction of Electromechanical Equipment Compound Faults Using Lifting Multi-wavelets[J].Journal of Mechanical Engineering,2010,46(1):79-85.
[2]雷亚国.基于改进Hilbert-Huang变换的机械故障诊断[J].机械工程学报,2011,47(5):71-77.
Lei Yaguo.Machinery Fault Diagnosis Based on Improved Hilbert-huang Transform[J].Journal of Mechanical Engineering, 2011, 47(5):71-77.
[3]陈保家,何正嘉,陈雪峰,等.机车故障诊断的局域均值分解解调方法[J].西安交通大学学报,2010,44(5):41-44.
Chen Baojia,He Zhengjia,Chen Xuefeng,et al.Locomotive Fault Diagnosis Based on Local Mean Decomposition Demodulating Approach[J].Journal of Xi’an Jiao Tong University,2010,44(5):41-44.
[4]杜必强,王松岭,唐贵基.形态学降噪在转子分形故障状态识别中的应用[J]. 中国电机工程学报,2008,28(26):71-76.

Du Biqing,Wang Songling,Tang Guiji.Application of Morphological De-nosing in Rotor Fault State Identifying by Fractal Method[J].Proceedings of the CSEE,2008,28(26):71-76.

[5]Benzi R,Sutera A,Vulpiani A.The Mechanism of Stochastic Resonance[J].Journal of Physics A: Mathematical and General, 1981,14(11):447-453.

[6]梁军利,杨树元,唐志峰.基于随机共振的微弱信号检测[J].电子与信息学报, 2006,28(6):1068-1072.
Liang Junli,Yang Shuyuan,Tang Zhifeng.Weak Signal Detection Based on Stochastic Resonance[J].Journal of Electronics & Information Technology,2006,28(6):1068-1072.
[7]冷永刚,王太勇,郭焱.二次采样用于随机共振从强噪声中提取弱信号的数值研究[J].物理学报,2003,52(10):2432-2437.
Leng Yonggang,Wang Taiyong,Guo Yan.Numerical Research of Twice Sampling Stochastic Resonance for the Detection of A Weak Signal Submerged in a Heavy Noise[J].Acta Physica Sinca,2003,52(10):2432-2437.
[8]何慧龙,王太勇,冷永刚,等.级联双稳随机共振降噪下的有噪ICA研究[J].天津大学学报,2006,39(12):1516-1520.
He Huilong,Wang Taiyong,Leng Yonggang,et al.Noisy ICA Based on Cascaded Bitable Stochastic Resonance Denoising[J]. Journal of Tianjin University,2006,39(12):1516-1520.
[9]赵艳菊,王太勇,冷永刚,等.级联双稳随机共振降噪下的经验模式分解[J].天津大学学报,2009,42(2):123-128.
Zhao Yanju,Wang Taiyong,Leng Yonggang,et al.Empirical Mode Decomposition Based on Cascaded Bistable Stochastic Resonance Denoising[J].Journal of Tianjin University,2009,42(2):123-128.
[10]毛谦敏,林敏,郑永军.基于随机共振的微弱多频信号检测方法[J].应用基础与工程科学学报,2008,16(1):86-91.
Mao Qianmin,Lin Min,Zheng Yongjun.Study of Weak Multi-frequency Signal Detection Based on Stochastic Resonance[J]. Journal of Basic Science and Engineering,2008,16(1):86-91.
[11]侯者非.强噪声背景下滚动轴承故障诊断的关键技术研究[D].武汉:武汉理工大学,2010.
[12]冷永刚,王太勇,郭焱,等.二次采样随机共振的工程应用研究[J].中国机械工程,2004,15(20):1847-1852.
Leng Yonggang,Wang Taiyong,Guo Yan,et al.Engineering Application Study of Twice Sampling Stochastic Resonance[J]. China Mechanical Engineering,2004,15(20):1847-1850.
[13]范俊波,郝继升.一种自适应B样条网络学习算法[J].电子学报,1999,27(8):90-93.
Fan Junbo,Hao Jisheng.An Adaptive Learning Algorithm for B-Spline Networks[J].Acta Electronica Sinica,1999,27(8):90-93.

[1]	李西兴, 杨道明, 李鑫, 吴锐, . 基于混合遗传鲸鱼优化算法的柔性作业车间自动导引车融合调度方法[J]. 中国机械工程, 2021, 32(08): 938-950，986.
[2]	赵丽娟, 王雅东, 王斌. 含夹矸煤层条件下采煤机螺旋滚筒工作性能分析与预测[J]. 中国机械工程, 2021, 32(08): 976-986.
[3]	刘雪梅；刘涛；郭欢. 基于可用度评价的混联生产线缓冲区配置优化[J]. 中国机械工程, 2020, 31(18): 2220-2230.
[4]	岳彩旭;刘鑫;刘智博;谢娜;王彦武. 基于有限元仿真的拼接模具铣削用刀具优化[J]. 中国机械工程, 2020, 31(17): 2085-2094.
[5]	刘雪梅1;王笑1;柳跃雷2. 模糊时间窗约束下的装配线物料配送方案优化[J]. 中国机械工程, 2020, 31(17): 2095-2103.
[6]	吕佑龙;许鸿伟;郑城;张洁;郑鹏. 基于混合式特征选择模型的晶圆允收测试关键参数识别方法[J]. 中国机械工程, 2020, 31(16): 1978-1984,1997.
[7]	杨杰, 胡琦, 肖亭, 张文颖, 张超勇. 基于能耗的冷轧连退机组能效建模与工艺参数优化及排序建模优化[J]. 中国机械工程, 2020, 31(14): 1724-1732.
[8]	刘建胜;雷兆发;聂伟豪;涂海宁. 一种鱼骨仓储布局下的拣选路径优化方法[J]. 中国机械工程, 2020, 31(10): 1225-1232.
[9]	吕凤鹏;李朝阳;黄健;陈兵奎. RV减速器转臂轴承的优化设计[J]. 中国机械工程, 2020, 31(09): 1043-1048.
[10]	郭祥雨;王琳;张永健. 规则约束下基于免疫遗传算法的机加工艺规划[J]. 中国机械工程, 2020, 31(04): 482-488.
[11]	张恒;李爱平;傅翔;邵焕;刘雪梅. 面向混批加工的装夹方案选择与线平衡集成优化方法[J]. 中国机械工程, 2019, 30(20): 2497-2504.
[12]	聂黎1;张国辉2;王小刚1;白跃伟1. 基于博弈论的虚拟制造网络车间调度优化方法[J]. 中国机械工程, 2019, 30(12): 1492-1497.
[13]	盛继新1;张邦基1;朱波2;王明1;金秋谈1. 两挡纯电动汽车传动系统参数优化和试验对比[J]. 中国机械工程, 2019, 30(07): 763-770,776.
[14]	贺长征1;宋豫川1;雷琦1;吕向飞1;刘软香1;陈进2. 柔性作业车间多自动导引小车和机器的集成调度[J]. 中国机械工程, 2019, 30(04): 438-447.
[15]	张磊1,2;冷杰武1,2;龚粤1,2. 悬臂式货架立体仓货位智能优化[J]. 中国机械工程, 2019, 30(04): 467-471,479.