[1]黄金陵.汽车车身设计[M].北京:机械工业出版社,2007.
[2]龙海靖,吕恒绪,张晓龙.B柱对侧面碰撞影响的试验研究[J].交通标准化,
2009(12):160-163.
Long Haijing,L Hengxu,Zhang Xiaolong.Test on Influence of B Pole on Side Collision[J].Transport Standardization,2009(12):160-163.
[3]潘锋,朱平.基于支持向量回归技术的轿车车顶压溃耐撞性研究[C]//中国汽车工程学会第十二届汽车安全技术年会.武汉,2009:51-56.
[4]Marklund P O,Nilsson L.Optimization of a Car Body Component Subjected to Side Impact[J].Industrial Applications and Case Studies,2001,21(3):383-392.
[5]游国忠,陈晓东,程勇,等.轿车B柱的优化及对侧面碰撞安全性的影响[J].汽车工程,2006,28(11):972-975.
You Guozhong,Chen Xiaodong,Cheng Yong,et al.B-pillar Optimization and Its Effect on Side Impact Safety[J].Automotive Engineering,2006,28(11):972-975.
[6]陆勇,曹立波,吴俊.轿车侧面碰撞安全结构改进方法研究[J].中国机械工程,2008,19(24):3006-3011.
Lu Yong,Cao Libo,Wu Jun.Study on the Structural Improvement Methods for Car Side Impact Safety[J].China Mechanical Engineering,2008,19(24):3006-3011.
[7]谭耀武,杨济匡,王四文.轿车B柱耐撞性与轻量化优化设计研究[J].中国机械工程,2010,21(23):2887-2892.
Tan Yaowu,Yang Jikuang,Wang Siwen.Study on Optimal Design of B-pillar for Crashworthiness and Light-weighting[J].China Mechanical Engineering,2010,21(23):2887-2892.
[8]潘锋,朱平,章斯亮.轿车车顶压溃仿真与结构耐撞性研究[J].中国公路学报,2010,23(3):108-114.
Pan Feng,Zhu Ping,Zhang Siliang.Research on Roof Crush Simulation and Structural Crashworthiness of Passenger Car[J].China Journal of Highway and Transport,2010,23(3):108-114.
[9]Mao M,Chirwa E C,Chen T,et al.Static and Dynamic Roof Crush Simulation Using LS-DYNA3D[J].International Journal of Crashworthiness,2004,9(5):495-504.
[10]Bathe K J,Walczak J,Guillermin O,et al.Advances in Crush Analysis[J].Computers and Structures,1999,72(1/3):31-47.
[11]唐友名,曹立波,Pradeep M,等.乘用车两车侧面碰撞变形侵入量影响因素研究[J].中国机械工程,2009,20(24):3013-3019.
Tang Youming,Cao Libao,Pradeep M,et al.Study on Influence Factors for Crush Intrusion in Passenger Vehicle Front-to-side Impact[J].China Mechanical Engineering,2009,20(24):3013-3019.
[12]唐友名.乘用车两车侧面碰撞的兼容性研究[D].长沙:湖南大学,2010.
[13]Min K B,Kim K S,Kang S S.A Study on Resistance Welding in Steel Sheets Using a Tailor-welded Blank(1st report) Evaluation of Upset Weldability and Formability[J].Journal of Materials Processing Technology,2000,30(4):186-192.
[14]Auto/Steel Partnership.Future Generation Passenger Compartment(FGPC) Validation Report,Final Report[R].Southfield: Auto/Steel Partnership,2010.
[15]阎启.激光拼焊板在轿车上的应用[J].应用激光,2004,24(6):396-398.
Yan Qi. The Application of Tailor Welded Blanks in the Automobile Industry[J].Applied Laser,2004,24(6):396-398.
[16]US Department of Transportation National High-way Traffic Safety Administration Laboratory Test Procedure.FMVSS 214 Dynamic Side Impact Protection[S].Washington D C:Office of Vehicle Safety Compliance,2006.
[17]张学荣,苏清祖.侧面碰撞乘员损伤影响因素分析[J].汽车工程,2008,3(2):146-150.
Zhang Xuerong,Su Qingzu.A Research on Influencing Factors of Occupant Injury in Side Impact[J].Automotive Engineering,2008,3(2):146-150.
[18]宝山钢铁股份有限公司.汽车用高强钢[EB/OL].[2009-09-15]http://www.baosteel.com/group/06other/ShowClass.asp?ClassID=379.
[19]Chen Guofei.Optimized Design Solutions for Roof Strength Using Advanced High Strength Steels[C]//SAE 2010 Word Congress & Exhibition. Detroit,2010:2010-01-0214. |