龈缘轮廓三维统计模型建模技术研究

中国机械工程 ›› 2012, Vol. 23 ›› Issue (20): 2445-2452.

龈缘轮廓三维统计模型建模技术研究

吴婷1,2;廖文和1;戴宁1

1.南京航空航天大学,南京,210016
2.嘉兴学院,嘉兴,314001

出版日期:2012-10-25 发布日期:2012-11-01
基金资助:
国家科技支撑计划资助项目(2009BAI81B02);高等学校博士学科点专项科研基金资助项目(20070287055)
The National Key Technology R&D Program（No. 2009BAI81B02）;

Research Fund for the Doctoral Program of Higher Education of China（No. 20070287055）

Research on Modeling Technology of 3D Statistical Model for Gingival Contours

Wu Ting1,2;Liao Wenhe1;Dai Ning1

1.Nanjing University of Aeronautics and Astronautics,Nanjing,210016
2.Jiaxing University,Jiaxing,Zhejiang,314001

Online:2012-10-25 Published:2012-11-01
Supported by:

The National Key Technology R&D Program（No. 2009BAI81B02）;

Research Fund for the Doctoral Program of Higher Education of China
（No. 20070287055）

摘要/Abstract

摘要：

为建立龈缘轮廓统计模型,提出了一种利用三角网格牙颌模型进行龈缘形态建模的方法。首先对牙颌模型进行离散曲率分析、最短路径搜索来探测龈缘特征线;根据特征线的微分特性进行单颗牙龈缘划分;然后通过B样条曲线拟合构建出每颗牙齿封闭光滑的龈缘轮廓线，并利用曲线的控制顶点作为龈缘训练形状向量;最后通过对形状训练集进行主成分分析来建立统计形状模型。实验结果表明该方法不仅能够自动而快速地提取出单颗牙齿龈缘轮廓，而且建立的统计模型能够正确而有效地捕获牙弓以及龈缘形态的重要变化特征。

关键词: 龈缘, 统计模型, 特征提取, 曲率, 最短路径

Abstract:

A novel and automatic shape modeling methodology for gingival contours from dental triangle meshes was proposed to build a 3D statistical model.The gingival feature lines were first obtained from the 3D dental model through a discrete curvature analysis and shortest path searching algorithm.Based on the gingival line differential characteristics, the feature lines were partitioned to demarcate the gingival line of each individual tooth.Through B-spline curve approximation to form the closed and smooth gingival contour of each tooth,the shape vector for training the model was then achieved using the control points of the B-spline curves.Finally,the statistical shape model was constructed through principle component analysis on the training set of the gingival shape vector.Experimental results demonstrate that this method can detect the gingival contours automatically and fastly,and the statistical model can capture the important variations effectively in arch and gingival morphology.

Key words: gingival contour, statistical model, feature extraction, curvature, shortest path

中图分类号:

TP391

吴婷1, 2, 廖文和1, 戴宁1. 龈缘轮廓三维统计模型建模技术研究[J]. 中国机械工程, 2012, 23(20): 2445-2452.

TUN Ting-1, 2, LIAO Wen-He-1, DAI Ning-1. Research on Modeling Technology of 3D Statistical Model for Gingival Contours[J]. China Mechanical Engineering, 2012, 23(20): 2445-2452.

参考文献

[1]Bichacho N. Achieving Optimal Gingival Esthetics Around Restored Natural Teeth and Implants. Rati- onale,Concepts, and Teehniques[J].Dental Clinics of North America,1998,42(4):763-780.
[2]Kim T H, Cascione D, Knezevie A. Simulated Tissue Using a Unique Pontic Design: a Clinical Report [J]. The Journal of Prosthetic Dentistry, 2009,102 (4) :205-210.
[3]Kinsel R P,Capoferri D. A Simplified Method to De- velop Optimal Gingival Contours for the Single Im- plant -- supported, Metal -- ceramic Crown in the Aesthetic Zone[J]. Practical Procedures & Aes- thetic Dentistry,2008,20(4) :231-236.
[4]Cootes T F, Taylor C J, Cooper D H, et al. Active Shape Models--Their Training and Application[J].Computer Vision and Image Understanding, 1995, 61(1) :38-59.
[5]Hutton T J, Hammond P, Davenport J C. ActiveShape Models for Customised Prosthesis Design [C]//Lecture Notes in Computer Science,Proceed- ings of Joint European Conference on Artificial In- telligence in Medicine and Medical Decision Making (AIMDM' 99). Berlin: Springer, 1999 : 448-452.
[6]Kondo T, Ong S H,Foong K W. Tooth Segmenta- tion of Dental Study Models Using Range Images [J]. IEEE Transactions on Medical Imaging, 2004, 23(3) : 350-362.
[7]Li Zhanli, Ning Xiaojuan, Wang Zengbo. A Fast Seg- mentation Method for STL Teeth Model[C]//Pro- ceedings of IEEE/ICME International Conference on Complex Medical Engineering(CME 2007). New York: IEEE,2007 : 163-166.
[8]Yuan T, Liao W H, Dai N, et al. Single-- tooth Mod- eling for 3D Dental Model[J]. Journal of Biomedical Imaging, 2010, Article ID 535329,14 pages.
[9]Hoppe H, DeRose T, Duchamp T, et al. Surface Re- construction from Unorganized Points[J]. Comput- er Graphics, 1992,26 (2) : 71-78.
[10]方惠兰 [1],王国瑾 [2].三角网格曲面上离散曲率估算方法的比较与分析[J].计算机辅助设计与图形学学报,2005,17(11):2500-2507.
[11]Goldfeather J,Interrante V. A Novel Cubic--order Algorithm for Approximating Principal Direction Vectors[J]. ACM Transactions on Graphics, 2004, 23(1) :45-63.
[12]郝国栋[1],程筱胜[1],戴宁[1],俞青[2].基于形态学的牙齿模型交互分割[J].中国制造业信息化：学术版,2008(1):36-39.
[13]Gallo G, Pallottino S, Shortest Path Algorithms [J].Annals of Operations Research, 1988,13 ( 1 ) : 1-79.
[14]Dijkstra E W. A Note on Two Problems in Con- nexion with Graphs[J]. Numerische Mathematik, 1959,1(1) :269-271.
[15]施法中.计算机辅助几何设计与非均匀有理B样条[M].北京：高等教育出版社,2001.
[16]Goodall C. Procrustes Methods in the Statistical Analysis of Shape[J]. Journal of the Royal Statis- tieal Society B, 1991,53 (2) :285-339.
[17]Umeyama S. Least--squares Estimation of Trans- formation Parameters between Two Point Patterns [J]. IEEE Transactions on Pattern Analysis and Machine Intelligence Archive, 1991, 13 (4): 376- 38O.