现代旋压设备发展趋势的探讨

中国机械工程 ›› 2012, Vol. 23 ›› Issue (10): 1251-1255.

现代旋压设备发展趋势的探讨

赵升吨;赵承伟;王君峰;林文捷

西安交通大学,西安,710049

出版日期:2012-05-25 发布日期:2012-05-30
基金资助:
国家自然科学基金资助项目(50905137）；科技人员服务企业行动项目(2009GJG00029)
National Natural Science Foundation of China（No. 50905137）

Discussion about Development Trends of Modern Spinning Equipment

Zhao Shengdun;Zhao Chengwei;Wang Junfeng;Lin Wenjie

Xi'an Jiao Tong University,Xi'an,710049

Online:2012-05-25 Published:2012-05-30
Supported by:
National Natural Science Foundation of China（No. 50905137）

摘要/Abstract

摘要：

随着新技术和新工艺的不断引入，旋压设备在传统设备的基础上有了很大的创新与改进。介绍了国内外旋压设备的发展历史和发展现状，分析了当前国外旋压设备的性能特点，尤其是其创新性，介绍了当前国内生产企业、研发单位对旋压设备的研发情况，比较了国内外旋压设备发展的差距，探讨了未来旋压设备发展的趋势。


关键词: 旋压设备, 旋压技术, 发展现状, 发展趋势

Abstract:

With the new technology and process being continually introduced into spinning equipment,it has a great innovation and improvement on the basis of the traditional equipment.This paper introduced the development history and research status of spinning equipment at home and abroad,and analysed the performance characteristics, especially the creativity,of spinning equipment abroad.This paper also presented the research and development situation of spinning equipment in domestic enterprises and universities,and compared the gap between home and abroad.At last,this paper put forward the development trends of spinning equipment.

Key words: spinning equipment, spinning technology, development status, development trend

中图分类号:

TG375

赵升吨, 赵承伟, 王君峰, 林文捷. 现代旋压设备发展趋势的探讨[J]. 中国机械工程, 2012, 23(10): 1251-1255.

DIAO Sheng-Dun, DIAO Cheng-Wei, WANG Jun-Feng, LIN Wen-Cha. Discussion about Development Trends of Modern Spinning Equipment[J]. China Mechanical Engineering, 2012, 23(10): 1251-1255.

参考文献

[1]Wong C C,Dean T A,Lin J. A Review of Spinning, Shear Forming and Flow Forming Processes[J]. International Journal of Machine Tools and Manufacture, 2003,14(43): 1419-1435.
[2]范淑琴,赵升吨,王春辉.普旋成形设备的研究现状[C]//第四届锻压装备与制造技术论坛九届一次学术交流会议论文集.太原,2009:89-93.
[3]Wang Lin, Long Hui. Investigation of Material De formation in Multi-pass Conventional Metal Spinning[J]. Materials 7 Design, 2011,5 (32) : 2891 2899.
[4]李世君.大型立式强力旋压机电液伺服系统的研究 [D].浙江大学机械与能源工程学院,2008:
[5]杨延涛[1],张立武[1],韩冬[1],张强[1].强力旋压成形工艺的研究进展[J].航天制造技术,2004(1):49-54.
[6]滕军,王宝同,王宝文.一种轮辐旋压机:中国,200910033358.3[P].2009-06-19.
[7]杨振浩.一种数控无模风机专用旋压机:中国,201010248687.2[P].2010-08-05.
[8]胡景春.连杆式三旋轮同步数控强力旋压机:中国,201020570708.8[P].2010-10-21.
[9]胡景春.连杆式四旋轮同步数控强力旋压机:中国,201020570709.2[P].2010-10-21.
[10]胡景春.下拉立式四旋轮数控强力旋压机:中国,201020627673.7[P].2010-10-27.
[11]胡景春.金属灯杆旋压机:中国,201020654633.1[P].2010-12-13.
[12]胡景春.一步法封头无胎冷旋压机:中国,201020570724.7[P].2010-10-21.
[13]王成和[1],沈少华[2],陈适先[3].PCX—350M型旋压机及料斗旋压工艺试验[J].锻压技术,1996,21(4):35-37.
[14]姜桂荣[1],李大龙[1],吕玫[1],钱志平[1],曹跟基[2],于波[2],吴正勇[2].GX-10型旋压机猎枪管旋压成形的因素分析与结构设计[J].制造技术与机床,2008(10):79-81.
[15]范淑琴[1],赵升吨[1],张琦[1],王春晖[1].双辊夹持板料旋压成形过程塑性变形行为的研究[J].精密成形工程,2010(1):1-4.