[1]宋元丽[1],孙亮[1],张秀荣[1],翟春林[1].浅谈长输管道的焊接技术及发展[J].金属加工:热加工,2009(14):28-31.
[2]Gordon M R, Norman C. Building Submarine Components from Duplex Stainless Steels[J]. Welding Journal, 2006,85 (11) : 32-33.
[3]Fujinaga S, Ohashi R, Urakami T. Development of an All-position YAG Laser Butt Welding Process with Addition of Filler Wire[J]. Welding International,2005,19(6):441-446.
[4]Koga S, Inuzuka M, Nishio M. Development of the All-position EBW Process and a Practical Welding System for Gas Pipelines[J]. Pipes & Pipelines Internaltional, 2002,47(6) : 29-35.
[5]梁君直[1],靳海成[1],黄福祥[1],邹欣[1].带衬垫的管道环焊缝根焊技术及焊接工艺[J].电焊机,2009,39(5):83-86.
[6]黄军平[1],曾君[1].金属粉芯焊丝+RMD技术在管道全位置根焊中的研究及应用[J].电焊机,2009,39(3):86-88.
[7]龚永飞[1],俞建荣[1],薛龙[1],蒋力培[1],邹勇[1],沈若泉[1],郭云卿[1].一种新型厚壁全位置药芯焊丝自保护焊[J].电焊机,2009,39(5):93-96.
[8]Irving R R. Cored Fine Wire Solves Cold Shut Problems[J]. Irog Age, 1972,209 (8): 63-64.
[9]Tien T T. The First Industrial Applicaition of Self-adaptive MAG STT Welding with Laser-assisted Joint Tracking [J]. Welding and Cutting, 2007, 6 (3) : 150-156.
[10]陈炯[1].STT型CO2焊在全位置焊中的应用[J].电焊机,2005,35(1):57-59.
[11]Murakami S, Kitagawa A, Nakajima H, et al. Study on Horizontal Narrow Gap Welding for Heavy Plates[J]. Hitachi Zosen Technical Review, 1986, 47 (1/2): 33-38.
[12]Du Qinghe. Study on s-s Method for Large Diameter Thick Wall Tube Welding in All Position [C]//International Conference on Quality and Reliability in Welding. Hangzhou, 1984: 1-5.
[13]日本焊接学会方法委员会.窄间隙焊接[M].尹士科,王振家,译.北京:机械工业出版社,1988.
[14]杨学谦.横焊摆动轨迹的研究.焊接学报,1980,1(4):197-204.
[15]唐德渝[1],冯标[1],李春润[1],张永晟[1],张建护[1],侯泽峰[1].管道全位置自动封底焊技术研究[J].石油工程建设,2006,32(1):50-54.
[16]唐德渝[1],冯标[1],李春润[1],张永晟[1],张建护[1],侯泽峰[1],张田利[1].管道全位置自动封底焊设备及工艺研究[J].电焊机,2006,36(9):37-42.
[17]Yang C L,Guo N,Lin S B,et al. Application of Rotating Arc System to Horizontal Narrow Gap Welding[J]. Science and Technology of Welding and Joining, 2009,14(2) : 172-177.
[18]Ito K, Hidaka T. Flux Cored Wires with Expanding Applications in Shipping and Offshore Industries [J]. Research and Development Kobe Steel Eng. Reps. ,2009,59(1) :98-104.
[19]Yoshida T, Matsuoka T,Uchida Y, et al. Application of Magnetic Stir Welding to Dissimilar Metal Structural Weld Overlay[C]//Int. Conf. Nucl. Eng. Orlando: ASME, 2008 : 539-546.
[20]Ambrosy G, Avillov V, Berqer P, et al. Laser Induced Plasma as a Source for an Intensive Current to Produce Electromagnetic Forces in the Weld Pool[C]//Proceedings of SHE 6346. Gmunden, Austria : SHE, 2006 : 332-339.
[21]Zhou J,Tsai H L. Application of Electromagnetic Force in Laser Welding [C]//Proeeeding of the ASME International Mechanical Engineering Congress and Exposition. Seattle, USA: ASME, 2008 1025-1030.
[22]Yukio M,Satoru Z,Yoshinori H. Method of Weld- ing in Horizontal Position and Welding Apparatus Therefore: United States, 6023043[P]:2000-02-08.
[23]Yukio M, Hirokazu W, Satoru Z, et al. Investigation on TIG Welding Using 2 Filler Wires with Electromagnetically Controlled Molten Pool Process in Horizontal Position[J]. Yosetsu Gakkai Ronbunshu,2000,18(1): 40-50.
[24]王军,陈树君,卢振洋,殷树言.磁场控制横向MAG焊接焊缝成型工艺的研究[J].北京工业大学学报,2003,29(2):147-150.
[25]Motomi K, Keiichiro H, Katsuhiko N. Welding Apparatus with Shifting Magnetic Field : US, 4190760 [P]: 1980-08-25.
[26]金百刚[1,2],王强[1],田勇[2],王军[2],陈明[2],王文仲[2],赫冀成[1].电磁连铸冶金技术及应用现状[J].冶金设备,2009(2):5-10.
[27]许威[1],刘雪松[1],方洪渊[1],徐文立[1].基于电磁力随焊控制残余应力和变形的可行性分析[J].焊接学报,2008,29(8):65-68.
[28]孟正华[1,2],黄尚宇[2],胡建华[2],胡婷婷[2].AZ31镁合金板材温热电磁成形能力[J].中国机械工程,2011,22(2):239-242. |