基于功能结构树的复杂系统SDG自动建模研究

中国机械工程 ›› 2011, Vol. 22 ›› Issue (5): 566-570,575.

基于功能结构树的复杂系统SDG自动建模研究

周虹;左洪福

南京航空航天大学,南京,210016

出版日期:2011-03-10 发布日期:2011-03-24
基金资助:
国家自然科学基金；中国民航联合资助基金重点项目(60939003)

Research on SDG Model Automatic Construction Based on Functional Structure Tree

Zhou Hong;Zuo Hongfu

Nanjing University of Aeronautics & Astronautics, Nanjing, 210016

Online:2011-03-10 Published:2011-03-24

摘要/Abstract

摘要：

为获取复杂系统SDG建模时所需的深层知识,探讨了复杂系统工作机理分析过程,提出了功能结构树概念。功能结构树作为构建SDG诊断模型的平台,组织存储系统功能、行为、故障等知识。给出了从系统功能结构树构建关联矩阵进而自动建立过程动态SDG模型的方法。与手工建模相比,该方法省时省力、不易出错、易维护,并能满足SDG模型需要随实际系统工作状态变化而动态调整的要求。以A320飞机气源系统SDG建模为例,说明了该方法的应用。

关键词:

功能结构树, SDG建模, 工作机理, 故障诊断, 关联矩阵

Abstract:

To obtain the deep knowledge required for SDG modeling of a complex system, the analysis process of system working mechanism was discussed and a concept of FST was presented. FST is a kind of platform for constructing the SDG model, as it organizes diagnostic knowledge such as system function, behavior, failure. The approach of SDG modeling was introduced, which was to construct conjunction matrix based on FST, then transform it to graph. Compared with SDG structured manually, this approach saves time and efforts. It can be less error-prone and easy to maintain, It also meets the requirements of dynamic adjustment of SDG model due to changes in actual working conditions. Finally, the applicability of the approach was demonstrated with a case study of SDG modeling for A320 aircraft pneumatics system.

Key words: functional structure tree(FST), SDG modeling, working mechanism, fault diagnosis, conjunction matrix

中图分类号:

TP206

周虹, 左洪福.

基于功能结构树的复杂系统SDG自动建模研究

[J]. 中国机械工程, 2011, 22(5): 566-570,575.

ZHOU Gong, ZUO Hong-Fu.

Research on SDG Model Automatic Construction Based on Functional Structure Tree

[J]. China Mechanical Engineering, 2011, 22(5): 566-570,575.

参考文献

[1]Maurya M R, Rengaswamy R, Venkatasubramanian V. A Systematic Framework for the Development and Analysis of Signed Diagraphs for Chemical Processes 1 :Algorithms and Analysis[J]. Industrial Engineering Chemistry Research, 2003,42(20) : 4789-4810.
[2]Maurya M R, Rengaswamy R, Venkatasubramanian V. A Systematic Framework for the Development and Analysis of Signed Diagraphs for Chemical Processes 2: Control Loops and Flowsheet Analysis [J]. Industrial & Engineering Chemistry Research, 2003 ,42(20) :4811-4827.
[3]杜殿林 [1],张光红 [2],吴重光 [1].基于知识故障诊断系统所用的深层知识及SDG方法[J].化工自动化及仪表,2005,32(4):8-11.
[4]李安峰,夏涛,张贝克,张钊谦,吴重光.化工过程SDG建模方法[J].系统仿真学报,2003,15(10):1364-1368.
[5]杨帆[1,2],萧德云[2],吴占松[1],.大规模复杂系统的递阶SDG模型描述及故障分析[J].华中科技大学学报：自然科学版,2009,0(S1):10-13.
[6]宋其江[1],徐敏强[1],王日新[1].基于分层有向图的航天器故障诊断[J].航空学报,2009,30(6):1058-1062.
[7]韩光臣[1],孙树栋[1],王军强[1],蔡志强[1].复杂系统模糊概率故障图模型研究[J].中国机械工程,2005,16(9):801-804.
[8]杨帆[1],萧德云[1].SDG建模及其应用的进展[J].控制理论与应用,2005,22(5):767-774.
[9]赵有珍,李健,邓家褆.产品功能结构建模研究[J].计算机应用研究,2003,20(11):32-35.
[10]张东民[1],廖文和[2],程筱胜[2],郭宇[2],张宏[3].复杂机械产品的层级实例库研究[J].中国机械工程,2009,10(1):48-51.
[11]王文辉,周东华.基于定性和半定性方法的故障检测与诊断技术[J].控制理论与应用,2002,19(5):653-659.
[12]张翅.A320飞机引气系统的特点及故障分析[J].航空维修与工程,1999,0(5):18-20.

[1]	王国彪, 赖一楠, 范大鹏, 杨华勇, 王时龙. 新型精密传动机构设计与制造综述 [J]. J4, 201016, 21(16): 1891-1897.
[2]	王立存, 陈进, 张贤明, 陈国强. 基于泛函的制冷涡旋压缩机变壁厚涡旋型线理论及形状优化 [J]. J4, 201016, 21(16): 1898-1901.
[3]	李小力, 陈威, 闫蓉. 基于BP神经网络的空间轮廓误差自适应补偿 [J]. J4, 201016, 21(16): 1902-1906.
[4]	夏瑞雪, 卢荣胜, 刘宁, 董敬涛. 基于圆点阵列靶标的特征点坐标自动提取方法 [J]. J4, 201016, 21(16): 1906-1910.
[5]	陈立锋, 吴晓铃, 秦大同, 肖正明. 齿轮啮合过程摩擦功耗研究 [J]. J4, 201016, 21(16): 1911-1915.
[6]	李明磊, 贾育秦, 张学良, 刘丽琴, 杜娟, 温淑花, 兰国生. 基于多目标差异演化算法的并联机构结构优化 [J]. J4, 201016, 21(16): 1915-1920.
[7]	吴怀超, 吴白羽, 张秀华. 石蜡感温阀传热性能的数字仿真研究 [J]. J4, 201016, 21(16): 1921-1926.
[8]	鲁开讲, 师俊平, 张锋涛. 平面三自由度并联机构动力学优化设计 [J]. J4, 201016, 21(16): 1926-1931.
[9]	张敏杰, 王庆九, 管成. 并联式油液混合动力挖掘机动力系统仿真研究 [J]. J4, 201016, 21(16): 1932-1936.
[10]	刘安平, 刘济春. IPC-208B型原子力显微镜大范围扫描三维驱动系统研究 [J]. J4, 201016, 21(16): 1936-1940.
[11]	姚运萍, 王智渊. 螺栓连接受载能量损失与结合面参数识别 [J]. J4, 201016, 21(16): 1941-1943,1951.
[12]	陈建, 邓利娟. 恒力弹性机构的设计 [J]. J4, 201016, 21(16): 1944-1946.
[13]	罗洁思, 于德介, 史美丽. 基于SVD和线调频小波路径追踪的转速波动齿轮箱故障诊断 [J]. J4, 201016, 21(16): 1947-1951.
[14]	战晓磊, 辛洪兵, 汉斯·彼德　兰特斯. 基于虚拟现实的MOTOMAN-HP3型机器人运动学仿真 [J]. J4, 201016, 21(16): 1952-1954,1998.
[15]	苏厚军, 史铁林, 陈非. 高炉煤气透平机状态检修的设计与实施 [J]. J4, 201016, 21(16): 1955-1958.