浮吊船-吊物耦合矢量建模

中国机械工程 ›› 2011, Vol. 22 ›› Issue (5): 561-565.

浮吊船-吊物耦合矢量建模

张梁娟;朱昌明;包继虎;张鹏

上海交通大学,上海,200240

出版日期:2011-03-10 发布日期:2011-03-24

Coupling Vector Modeling of Floating Crane and Suspended Load

Zhang Liangjuan;Zhu Changming;Bao Jihu;Zhang Peng

Shanghai Jiaotong University,Shanghai,200240

Online:2011-03-10 Published:2011-03-24

摘要/Abstract

摘要：

以海上风力发电机安装为研究背景,基于矢量动力学理论,建立了9自由度的浮吊船-吊物耦合的非线性动力学模型。模型将船体简化为刚体,以其在风浪流等载荷激励下的6自由度运动为基础,引入浮吊船和吊物的耦合作用,且吊物的耦合作用通过其对船体施加的力和力矩体现。模型同时考虑了风机吊物摆动过程中吊索的弹性变形因素以及吊索的升降作业操作等因素。该模型采用了向量和矩阵记法,具有很强的适用性和通用性。最后在同等设定条件下与以往的研究模型进行了比较,比较结果验证了该模型的有效性。

关键词:

浮吊船, 起重船, 吊装, 矢量法, 耦合作用

Abstract:

A 9-DOF nonlinear dynamics model was set up in the background of offshore turbine installation.The dynamics model incorporated ship motions coupled with nonlinear large payload swings. The ship and crane were treated as one rigid body and the model included arbitrary, bi-angular swings of the suspended load coupled with the 6-DOF of the ship, in addition to 3-DOF of the load in-plane and out-of-plane sway angles and elastic stretch of the hoisting cable. The model was described by matrix and vector, which is very general and applicable. The validity of the model was verified by comparion with existing models.

Key words: floating crane, crane ship, heavy lift, vector mechanics, coupling

中图分类号:

TP391.9

张梁娟, 朱昌明, 包继虎, 张鹏.

浮吊船-吊物耦合矢量建模

[J]. 中国机械工程, 2011, 22(5): 561-565.

ZHANG Liang-Juan, SHU Chang-Meng, BAO Ji-Hu, ZHANG Feng.

Coupling Vector Modeling of Floating Crane and Suspended Load

[J]. China Mechanical Engineering, 2011, 22(5): 561-565.

[1]	田颖, 张建华, 张明路. 垂直平面三杆柔性机械手动力学建模及仿真[J]. 中国机械工程, 2015, 26(8): 1014-1018.
[2]	黄常青, 王学林, 胡于进. 基于CFD的起重船水动力系数数值模拟 [J]. 中国机械工程, 2011, 22(17): 2076-2079.
[3]	王学林, 尤心一, 胡于进. 规则波作用下起重船吊重动力学仿真 [J]. 中国机械工程, 2010, 21(9): 1077-1082.