基于行驶工况的纯电动汽车比能耗分析及传动比优化

中国机械工程 ›› 2011, Vol. 22 ›› Issue (10): 1236-1241.

基于行驶工况的纯电动汽车比能耗分析及传动比优化

周兵;江清华;杨易;王继生

湖南大学汽车车身先进设计制造国家重点实验室,长沙,410082

出版日期:2011-05-25 发布日期:2011-05-31
基金资助:
中央高校基本科研业务费专项资金资助项目(531107040149)；长江学者和创新团队发展计划资助项目(531105050037)；湖南大学汽车车身先进设计制造国家重点实验室自主研究课题资助项目(60870002)
Fundamental Research Funds for the Central Universities( No. 531107040149 );
Supported by Program for Changjiang Scholars and Innovative Research Team in University（No. 531105050037）

Analysis of Specific Energy Consumption and Ratio Optimization of BEV Based on Running Schedule

Zhou Bing;Jiang Qinghua;Yang Yi;Wang Jisheng

State Key Laboratory of Advanced Design and Manufacture for Vehicle Body,Hunan University,Changsha,410082

Online:2011-05-25 Published:2011-05-31
Supported by:

Fundamental Research Funds for the Central Universities( No. 531107040149 );
Supported by Program for Changjiang Scholars and Innovative Research Team in University（No. 531105050037）

摘要/Abstract

摘要：

通过分析长沙市市区行驶工况,根据汽车行驶方程,对采样点处汽车的微小能耗进行分析,并计及电动机制动能量的回收，推导出行驶工况下纯电动汽车的比能耗表达式。以环线行驶工况和市内行驶工况的比能耗和动力因数作为优化目标函数,根据电动机最高转速、峰值转矩和地面附着力对汽车性能的影响建立了传动系传动比的边界约束条件，同时为保证纯电动汽车在电池低荷电状态下仍具有一定的动力性和经济性，引入了电池低荷电状态时的传动比边界约束条件。引入加权系数，利用基于模拟退火的粒子群优化算法对所设计的纯电动汽车传动系的传动比进行了优化，在某组加权系数下，优化结果使得动力因数提高、比能耗降低。

关键词:

纯电动汽车, 行驶工况, 比能耗, 优化

Abstract:

Through the analysis of running schedule of Changsha,according to the automobile running equation,the minimal energy under the sampling points were analyzed, and the recycle of braking energy of motor was analyzed,the expression of specific energy consumption was derived.The objective function of optimization was established with the specific energy consumption under the loop and main-road running cycle and the dynamic factor,the boundary constraints of ratio optimization were established with the maximum speed and peak torque of the motor and traction.In order to assure the dynamic performance of the designed car under the lower state of charge of the battery,the boundary constraints were introduced in the optimization.A particle swarm optimization based on the simulated annealing was used in the optimization,the weighting coefficient was also introduced in the optimization.The optimization results

increase the dynamic factor and reduce the specific energy of the designed car under a group of weighting coefficients.

Key words:

battery electric vehicle(BEV), running schedule, specific energy consumption, optimization

中图分类号:

U469.72

周兵, 江清华, 杨易, 王继生.

基于行驶工况的纯电动汽车比能耗分析及传动比优化

[J]. 中国机械工程, 2011, 22(10): 1236-1241.

ZHOU Bing, JIANG Qing-Hua, YANG Yi, WANG Ji-Sheng.

Analysis of Specific Energy Consumption and Ratio Optimization of BEV Based on Running Schedule

[J]. China Mechanical Engineering, 2011, 22(10): 1236-1241.

[1]	李洪丞;马国喜;罗蓉;罗志勇. 基于实验设计与数据分析的金属热挤压成形比能耗优化[J]. 中国机械工程, 2019, 30(15): 1849-1855.
[2]	徐兴硕, 李方义, 孔维森, 于文凯, 周金强, 周丽蓉. [绿色设计]基于Vericut的机床能耗建模与仿真[J]. 中国机械工程, 2018, 29(21): 2533-2538.
[3]	高建平, 高小杰, 郗建国. [动力电池]融合车、路、人信息的电动汽车续驶里程估算[J]. 中国机械工程, 2018, 29(15): 1854-1862.
[4]	石琴, 仇多洋, 吴冰, 李一鸣, 刘炳姣. [智能感知]基于粒子群优化支持向量机算法的行驶工况识别及应用[J]. 中国机械工程, 2018, 29(15): 1875-1883.
[5]	高建平1;张磊敏1;孙中博2;郗建国1. 基于工况影响的插电式混合动力汽车控制策略优化[J]. 中国机械工程, 2017, 28(15): 1770-1777.
[6]	于丽敏, 熊会元, 宗志坚, 吴义忠. 电动汽车动力系统参数多指标稳健设计方法[J]. 中国机械工程, 2016, 27(20): 2828-2834.
[7]	石琴;马洪龙;丁建勋;龙建成;凌翔. 改进的FCM聚类法及其在行驶工况构建中的应用[J]. 中国机械工程, 2014, 25(10): 1381-1387.
[8]	叶南海, 戚一男, 陈凯, 翟银秀. 基于改进PSO的可靠性稳健优化计算方法 [J]. 中国机械工程, 2012, 23(5): 551-555.
[9]	申远, 金一, 褚彪, 骆念武, 竺长安. 基于遗传算法的锻压机床多目标优化设计方法 [J]. 中国机械工程, 2012, 23(3): 291-294.
[10]	郑永前, 王阳. 基于遗传算法的加工工艺决策与排序优化 [J]. 中国机械工程, 2012, 23(1): 59-65.
[11]	王春燕1, 2, 赵万忠1, 2, 赵婷1, 周协1. 电动轮汽车差速助力转向系统路感优化 [J]. 中国机械工程, 2012, 23(1): 123-125.
[12]	黄强, 陈坤, 张根保. 直驱式主轴系统的动刚度分析 [J]. 中国机械工程, 2011, 22(9): 1096-1099.
[13]	石琴, 郑与波. 因子分析在汽车行驶工况构建过程中的应用 [J]. 中国机械工程, 2011, 22(9): 1123-1127.
[14]	裴磊, 成艾国, 李铁柱, 高晖. 基于田口鲁棒设计的乘员约束系统性能优化 [J]. 中国机械工程, 2011, 22(9): 1128-1133.
[15]	李郝林, 王健. 基于灰色关联分析的平面磨削工艺参数优化 [J]. 中国机械工程, 2011, 22(6): 631-635.