缝合复合材料泡沫夹层结构的平压和剪切性能研究

中国机械工程 ›› 2011, Vol. 22 ›› Issue (10): 1213-1215.

缝合复合材料泡沫夹层结构的平压和剪切性能研究

刘华峰1;赵凯辉2;王佩艳1;岳珠峰１

1.西北工业大学,西安,710072

2.河南理工大学,焦作,454000

出版日期:2011-05-25 发布日期:2011-05-31
基金资助:
国家高技术研究发展计划(863计划)资助项目(2009AA04Z418)；国家自然科学基金资助项目(50775183)
National High-tech R&D Program of China (863 Program) （No. 2009AA04Z418）;
National Natural Science Foundation of China（No. 50775183）

Study on Mechanical Behavior of Composites Stitched Foam Sandwich Panels under Flatwise Compression and Shear

Liu Huafeng１;Zhao Kaihui２;Wang Peiyan1;Yue Zhufeng1

1.Northwestern Polytechnical University,Xi’an，710072

2.Henan Polytechnic University,Jiaozuo,Henan,454000

Online:2011-05-25 Published:2011-05-31
Supported by:

National High-tech R&D Program of China (863 Program) （No. 2009AA04Z418）;
National Natural Science Foundation of China（No. 50775183）

摘要/Abstract

摘要：

选用3种相同材料制造的复合材料泡沫夹层结构形式（未缝合、锁式缝合和达夫汀缝合），进行了面外压缩（平压）和面内剪切两项试验，研究了缝合方法对缝合夹层结构力学性能和破坏模式的影响。试验数据和观察结果表明,泡沫夹层结构缝合后较未缝合结构，面外压缩和面内剪切的强度和模量均得到了极大提高;不同的缝纫方法使得结构强度和模量的提高程度不同;达夫汀缝合方式使面外压缩和面内剪切的强度和模量的提高程度均优于锁式缝合方式。试验结果为进一步的结构设计和理论分析提供性能分析数据。

关键词:

复合材料, 泡沫夹芯, 达夫汀缝合, 锁式缝合



Abstract:

Experiments on three kinds of composite foam core sandwich structures under flatwise compression and shear were present herein.Unstitch foam,lock-stitch

foam and Tufting stitch foam sandwich structures were produced using the same face

materials in order to study the stitch methods how to influence the mechanical property and failure modes.The experimental results show the significant increase in the strength and modulus of flatwise compression and shear of the stitched foam sandwich structures.Different stitch methods brought the different extent increases of the stitched structures.Tufting stitch is better than lock-stitch in the increasing of the strength and modulus.The results can be used in structural design and theoretical analysis.

Key words:

composite material, foam core sandwich panel, Tufting stitch, lock-stitch

中图分类号:

TB332

刘华峰1, 赵凯辉2, 王佩艳1, 岳珠峰１.

缝合复合材料泡沫夹层结构的平压和剪切性能研究

[J]. 中国机械工程, 2011, 22(10): 1213-1215.

LIU Hua-Feng-1, DIAO Kai-Hui-2, WANG Pei-Yan-1, YUE Zhu-Feng-１.

Study on Mechanical Behavior of Composites Stitched Foam Sandwich Panels under Flatwise Compression and Shear

[J]. China Mechanical Engineering, 2011, 22(10): 1213-1215.

[1]	卢敏, 周来水, 王小平. 一种基于投影法的铺丝路径优化生成算法 [J]. 中国机械工程, 2011, 22(16): 1993-1996.
[2]	张翔, 陈军, 林莉, 李喜孟. 复合材料孔隙形貌特征对超声波散射衰减影响的分析 [J]. 中国机械工程, 2010, 21(14): 1735-1741.
[3]	刘华峰, 岳珠峰. 多墙翼面结构后屈曲强度试验和数值研究 [J]. 中国机械工程, 2010, 21(05): 607-610.