一种四自由度空间并联机构的奇异容错纠错策略与方法研究

中国机械工程 ›› 2011, Vol. 22 ›› Issue (10): 1143-1148.

一种四自由度空间并联机构的奇异容错纠错策略与方法研究

陈斯;范守文

电子科技大学,成都,611731

出版日期:2011-05-25 发布日期:2011-05-31
基金资助:
国家自然科学基金资助项目(50775027)；机械传动国家重点实验室开放基金资助项目(SKLMT-KFKT-201010)；流体传动及控制国家重点实验室开放基金资助项目(GZKF-201029)
National Natural Science Foundation of China（No. 50775027）

Study on Fault Tolerance and Fault Rectification Strategy and Approach for Singularities of a 4-DOF Spatial Parallel Mechanism

Chen Si;Fan Shouwen

University of Electronic Science and Technology of China,Chengdu,611731

Online:2011-05-25 Published:2011-05-31
Supported by:

National Natural Science Foundation of China（No. 50775027）

摘要/Abstract

摘要：

以Gosselin的奇异分类为基础，将第二类奇异位形对并联机构的不利影响看成是一种机械系统故障，提出了结合冗余驱动的并联机构奇异容错纠错策略框架。阐述了该容错纠错策略框架的基本思想和实现步骤，用线性方程组解的情况和矩阵条件数解释了该奇异位形“故障”发生和被克服的实质，以此为基础定义了描述奇异被消除程度的奇异容错度指标，基于该指标提出了容错结构优化算法，用来确定使并联机构具有最佳奇异容错能力的冗余驱动的结构参数。分析得到了2RPS&2TPS型并联机构的一个典型的第二类奇异位形，比较了三种奇异容错策略克服这一奇异位形效果的优劣，对这三种容错纠错策略进行了仿真研究，结果表明，提出的以奇异容错度为依据的容错纠错策略能有效克服奇异位形的不良影响。

关键词:

并联机构, 奇异位形, 容错, 纠错, 冗余驱动

Abstract:

Based on singularity classification approach of Gosselin, singularities of type Ⅱ were treated as a kind of mechanical system faults, a fault-tolerance and fault-

rectification strategy framework for eliminating singularities was presented based on actuation redundancy herein. Basic idea and implementation process of this framework

were expatiated, the essence of singularity occurring and singularity being removed

were interpreted by solutions of linear equations and matrix condition number. Degree of singularity fault-tolerance was defined as an index for describing the performance of singularities being eliminated. Based on this index, an optimization algorithm was proposed

to determine optimal structural parameters for the redundant actuation, which enabled parallel manipulators to possess maximum singularity fault-tolerance ability. A typical singularity loci for 2RPS&2TPS parallel mechanism was obtained, three fault-tolerance and fault-rectification strategies were presented and compared in details. Simulation researches for above three fault-tolerance and fault-rectification strategies were conducted.Simulation results show that the fault-tolerance and fault-rectification strategy based on degree of singularity fault-tolerance can eliminate side effect of singularities in parallel mechanisms effectively.

Key words: parallel mechanism, singularity, fault-tolerance;fault-rectification, actuation redundancy

中图分类号:

陈斯, 范守文.

一种四自由度空间并联机构的奇异容错纠错策略与方法研究

[J]. 中国机械工程, 2011, 22(10): 1143-1148.

CHEN Shi, FAN Shou-Wen.

Study on Fault Tolerance and Fault Rectification Strategy and Approach for Singularities of a 4-DOF Spatial Parallel Mechanism

[J]. China Mechanical Engineering, 2011, 22(10): 1143-1148.

参考文献

[1]范守文[1],黄洪钟[1],杨玻玻[1].机电产品容错纠错设计系统及其基本框架研究[J].计算机集成制造系统,2007,13(7):1275-1281.
[2]Russell K,Sodhi R S. Kinematic Synthesis of Ad- justable RRSS Mechanisms for Multi-- phase Mo- tion Generation[J]. Mechanism and Machine Theo- ry, 2001,36 (8) : 939-952.
[3]黄真,杜雄.3／6—SPS型Stewart机器人的一般线性丛奇异分析[J].中国机械工程,1999,10(9):997-1000.
[4]吴宇列.并联机构奇异位形的微分几何理论以及冗余并联机构的研究 [D].国防科学技术大学,2001:
[5]沈辉[1],吴学忠[1],李泽湘[1].并联机构奇异点的运动分岔研究[J].国防科技大学学报,2004,26(6):54-57.
[6]韩先国.并联机床相关理论及设计方法研究 [D].北京航空航天大学,2002:
[7]李艳文.几类空间并联机器人的奇异研究[D].燕山大学,2005:
[8]白志富[1],韩先国[1],陈五一[1].冗余驱动消除并联机构奇异研究[J].航空学报,2006,27(4):733-736.
[9]Marquet F, Krut S, Company F, et al. ARCHI: A New Redundant Parallel Mechanism -- modeling, Control and First Resuhs[C]//Proceedings of the 2001 IEEE/RSJ International Conference on Intelli- gent Robot and Systems. Maul, Hawaii, USA, 2001 : 183-188.
[10]Wang Jinsong, Wu Jun, Li Tiemin, et al. Work- space and Singularity Analysis of a 3--DOF Planar Parallel Manipulator with Actuation Redundancy [J]. Robotiea, 2009,27 : 51-57.
[11]Sadjadian H,Taghirad H D. Kinematic, Singularity and Stiffness Analysis of the Hydraulic Shoulder: A 3-d. o. f. Redundant Parallel Manipulator[J]. Advanced Robotics, 2006,20 (7) : 763-781.
[12]Gosselin C, Angeles J. Singularity Analysis of Closed--loop Kinematic Chains[J]. IEEE Transac-tion on Robotics and Automation, 1990,6 (3) : 281- 290.
[13]Park F C, Kim J M. Singularity Analysis of Closed Kinematic Chains[J]. Transactions of the ASME Journal of Mechanical Design, 1999,121 ( 1 ) :32-38.

[1]	鲁开讲, 师俊平, 张锋涛. 平面三自由度并联机构动力学优化设计 [J]. J4, 201016, 21(16): 1926-1931.
[2]	雷荣华1,2;陈力1,2. 空间机器人执行器部分失效故障的终端滑模容错控制[J]. 中国机械工程, 2019, 30(08): 947-953.
[3]	沈惠平;赵迎春;许可;张震;杨廷力. 一种可重构、部分运动解耦的空间n维平移1维转动并联机构的拓扑及其运动学设计[J]. 中国机械工程, 2019, 30(04): 413-422.
[4]	李亮1;刘一方2;谭跃刚3. 一类非完整机械手的链式变换特性及其运动规划方法[J]. 中国机械工程, 2017, 28(16): 1959-1964.
[5]	徐鑫, 张天宏, 盛汉霖. 基于动态系数法的微型涡喷发动机实时建模[J]. 中国机械工程, 2015, 26(2): 243-247.
[6]	窦玉超1,2;姚建涛1,2;侯雨雷1,2;赵永生1,2. 65m射电望远镜副面调整机构容错策略与工作空间边界识别[J]. 中国机械工程, 2014, 25(1): 17-22.
[7]	刘玮, 常思勤. 一种新型并联机器人的奇异性与工作空间研究[J]. 中国机械工程, 2012, 23(7): 786-790.
[8]	杨柳青1, 2, 陈无畏1, 汪洪波1. 基于H2/H∞控制的汽车主动悬架最优鲁棒容错控制[J]. 中国机械工程, 2012, 23(24): 3013-3019.
[9]	陈斯, 范守文. 采用过约束冗余驱动提高球面并联机构精度容错能力的研究[J]. 中国机械工程, 2012, 23(16): 1983-1990.
[10]	沈惠平1, 赵海彬1, 邓嘉鸣1, 徐林森2, 杨廷力1. 滑块型直线驱动并(混)联机构新型驱动装置及其变胞性研究 [J]. 中国机械工程, 2011, 22(21): 2540-2545.
[11]	吴丹1, 2, 金敏1. 基于容错度自适应支持向量机的液压泵故障诊断 [J]. 中国机械工程, 2011, 22(21): 2582-2587.
[12]	刘延斌, 韩秀英, 郭志佳, 贾新杰. 一种新型3-RPR并联机构及其运动学分析 [J]. 中国机械工程, 2011, 22(19): 2307-2311.
[13]	范彩霞, 刘宏昭, 张彦斌. 基于构型演变和李群理论的2T2R型四自由度并联机构型综合 [J]. 中国机械工程, 2010, 21(9): 1101-1105.
[14]	敖银辉. 平面并联机构的自适应控制方法研究 [J]. 中国机械工程, 2010, 21(7): 835-838.
[15]	尹小琴, 许永根, 马履中, 陈修祥, 龚智强. 中医推拿机器人末端执行器结构优选与运动学分析 [J]. 中国机械工程, 2010, 21(24): 2899-2903.