超重型数控落地铣镗床滑枕挠曲变形补偿研究

中国机械工程 ›› 2010, Vol. 21 ›› Issue (20): 2416-2420.

超重型数控落地铣镗床滑枕挠曲变形补偿研究

吴凤和1,2;王少伟1;杨育林1;王跃宏2

1.燕山大学,秦皇岛,066004
2.齐齐哈尔二机床(集团)有限公司,齐齐哈尔,161005

出版日期:2010-10-25 发布日期:2010-10-29
基金资助:
国家科技重大专项(2009ZX04002-061)
National Science and Technology Major Project ( No. 2009ZX04002-061)

Research on Deflection Compensation of Ram of Super-heavy-duty CNC Floor Boring and Milling Machine

Wu Fenghe1,2;Wang Shaowei1;Yang Yulin1;Wang Yuehong2

1.Yanshan University,Qinhuangdao,Hebei,066004

2.Qiqihaer No.2 Machine Tool (Group) Co., Ltd.,Qiqihaer,Helongjiang,161005

Online:2010-10-25 Published:2010-10-29
Supported by:
National Science and Technology Major Project ( No. 2009ZX04002-061)

摘要/Abstract

摘要：

针对超重型数控落地铣镗床大行程滑枕的变形补偿难题,提出了一种理论分析、数值计算与实验研究相结合的方法,利用有限元分析方法找出滑枕挠曲变形分布规律和变形与滑枕行程间的关系,通过理论分析确定拉杆补偿力的初算值,结合有限元分析方法得到了补偿力与滑枕行程关系曲线。理论与实验结果对比表明,该方法较准确地预测了超重型数控落地铣镗床滑枕挠曲变形分布情况,满足了机床滑枕挠曲变形的补偿要求。

关键词:

落地铣镗床, 滑枕, 挠曲变形, 补偿

Abstract:

A combined method of theoretical analysis, numerical calculation and experimental technique was proposed to solve the problem of deflection compensation of long stroke ram of super-heavy-duty CNC floor boring and milling machine. The laws of deflection of ram, and the relationship curve between deflection and stroke of ram were obtained through finite element analysis methodology. The preliminary calculation formula of compensation force was derived through theoretical analysis, and the relationship curve between compensation force and stroke of ram was obtained through finite element analysis methodology.Theoretical and experimental results show that, the method given

herein can exactly forecast the distribution of ram’s deflection, and it is feasible for deflection compensation of ram of super-heavy-duty CNC floor boring and milling machine.

Key words:

floor boring and milling machine, ram, deflection, compensation

中图分类号:

TG535

吴凤和, 王少伟, 杨育林, 王跃宏.

超重型数控落地铣镗床滑枕挠曲变形补偿研究

[J]. 中国机械工程, 2010, 21(20): 2416-2420.

TUN Feng-He, WANG Shao-Wei, YANG Yo-Lin, WANG Ti-Hong.

Research on Deflection Compensation of Ram of Super-heavy-duty CNC Floor Boring and Milling Machine

[J]. China Mechanical Engineering, 2010, 21(20): 2416-2420.

[1]	姚齐水, 李超, 王勇, 余江鸿, 杨文. 基于预负荷弹性支承的印刷滚筒承载性能研究[J]. 中国机械工程, 2015, 26(23): 3214-3220.
[2]	韦勇, 赵亮, 康雨 . 基于大挠度理论的减振器阀片精确变形模拟和研究[J]. 中国机械工程, 2015, 26(11): 1556-1561.
[3]	康雨, 赵亮, 郭孔辉, . 考虑阀片大挠曲变形的减振器建模与参数辨识[J]. 中国机械工程, 2014, 25(18): 2544-2549,2555.
[4]	吴凤和, 赵峰兵. 拉杆与推杆组合式滑枕挠曲变形补偿法[J]. 中国机械工程, 2012, 23(22): 2667-2670,2684.
[5]	郑蓓蓉, 薛伟, 周晨, 张淼. 压力传感器集成恒流源灵敏度温度系数补偿 [J]. 中国机械工程, 2010, 21(7): 800-803.
[6]	吴晓, 朱世强, 刘松国. 基于PDAG算法的工业机器人轨迹跟踪 [J]. 中国机械工程, 2010, 21(19): 2302-2307.
[7]	吴雄彪, 姚鑫骅, 何振亚, 傅建中. 基于支持向量机的数控机床空间误差辨识与补偿 [J]. 中国机械工程, 2010, 21(12): 1397-1400.
[8]	陈刚, 张为公, 龚宗洋, 孙伟. 用于汽车驾驶机器人的车辆性能自学习方法 [J]. 中国机械工程, 2010, 21(04): 491-495.
[9]	严运兵, 颜伏伍, 杜常清. 并联混合动力电动汽车动态协调控制策略及仿真研究 [J]. 中国机械工程, 2010, 21(02): 234-239.