复杂刃形陶瓷刀具微波烧结技术研究

doi:10.3969/j.issn.1004-132X.2022.08.003

摘要/Abstract

摘要： 利用微波烧结技术实现了复杂刃形陶瓷刀具的高效制备。仿真研究了微波电场和温度场随试样加载方式的变化规律，实验验证了不同试样加载方式对陶瓷刀具致密度、力学性能和微观结构的影响以及复杂槽型陶瓷刀具的切削性能。研究结果表明，多个试样平行横放且处于微波烧结腔中心位置时，试样之间的电场强度均匀、温差小，更有利于多个试样同时达到致密。利用微波烧结技术制备的复杂槽型Al2O3/SiC陶瓷刀具刃形结构完整，具有较好的切削性能。相较于传统平刀面陶瓷刀具，复杂槽型陶瓷刀具的金属去除量提高了近2倍，加工表面粗糙度降低了约33%。基于微波烧结的复杂陶瓷刀具“结构-性能”一体化高效制造技术具有广阔的应用前景。

关键词: 陶瓷刀具, 复杂刃形刀具, 微波烧结, 微波电场, 刀具制造

Abstract: The complex-shaped ceramic tools were efficiently prepared by microwave sintering. The effects of loading mode of samples on distribution of microwave electric field and temperature field were studied by simulation， and the influences of different loading modes on relative density， mechanics properties and microstructure of samples were studied by experiments. Cutting performances of the complex-shaped ceramic tools were also investigated. The results show that when samples are placed horizontally and at the center of the microwave sintering cavity， the electric fields are uniform and the temperature differences are small， that is beneficial to reach full density simultaneously for several samples. The complex-shaped Al2O3/SiC composite ceramic tools prepared by microwave sintering have the integrated cutting edge and show better cutting performance. Compared with the traditional flat rake face ceramic tools， the material removal of complex-shaped ceramic tools are increased 2 times and the machined surface roughness is decreased by about 33%. “Structure-performance” integrated manufacturing technology of complex-shaped ceramic tools based on microwave sintering has broad application prospects.

Key words: ceramic tool, complex-shaped tool, microwave sintering, microwave electric field, tool manufacturing

中图分类号:

TB332

殷增斌, 朱智勇, 王子祥, 袁军堂. 复杂刃形陶瓷刀具微波烧结技术研究[J]. 中国机械工程, 2022, 33(08): 899-907.

YIN Zengbin, ZHU Zhiyong, WANG Zixiang, YUAN Juntang. Study on Microwave Sintering Technology of Complex-shaped Ceramic Tools[J]. China Mechanical Engineering, 2022, 33(08): 899-907.

参考文献

［1］OGHBAEI M， MIRZAEE O. Microwave Versus Conventional Sintering：a Review of Fundamentals， Advantages and Applications［J］. Journal of Alloys and Compounds， 2010， 494（1/2）：175-189.
［2］DEMIRSKYI D， AGRAWAL D， RAGULYA A. Tough Ceramics by Microwave Sintering of Nanocrystalline Titanium Diboride Ceramics［J］. Ceramics International， 2014， 40（1）：1303-1310.
［3］JANNEY M A， KIMREY H D， SCHMIDT M A， et al. Grain Growth in Microwave-annealed Alumina［J］. Journal of the American Ceramic Society， 1991， 74（7）：1675-1681.
［4］YIN Z， YUAN J， CHENG Y， et al. Microstructure Evolution and Densification Kinetics of Al2O3/Ti（C， N） Ceramic Tool Material by Microwave Sintering［J］. International Journal of Refractory Metals and Hard Materials， 2016， 61：225-229.
［5］YAN S， YIN Z， YUAN J， et al. Microstructure and Properties of Submicron Grained Alumina Ceramic Tool Material Prepared by Two-step Microwave Sintering［J］. Ceramics International， 2018， 44（14）：17479-17485.
［6］ZUO F， BADEV A， SAUNIER S， et al. Microwave Versus Conventional Sintering：Estimate of the Apparent Activation Energy for Densification of α-Alumina and Zinc Oxide［J］. Journal of the Euro-pean Ceramic Society， 2014， 34（12）：3103-3110.
［7］RYBAKOV K I， SEMENOV V E， LINK G， et al. Preferred Orientation of Pores in Ceramics under Heating by a Linearly Polarized Microwave Field［J］. Journal of Applied Physics， 2007， 101（8）：1-5.
［8］RAJ R， COLOGNA M， FRANCIS J S C. Influence of Externally Imposed and Internally Generated Electrical Fields on Grain Growth， Diffusional Creep， Sintering and Related Phenomena in Ceramics［J］. Journal of the American Ceramic Society， 2011， 94（7）：1941-1965.
［9］Z·YMEKA D， SAUNIER S， GOEURIOT D， et al. Densification and Thermal Gradient Evolution of Alumina during Microwave Sintering at 2.45 GHz［J］. Ceramics International， 2013， 39（3）：3269-3277.
［10］陈利祥. 结构陶瓷微波烧结/焊接腔内电磁场分布的仿真模拟研究［D］. 青岛：中国海洋大学， 2011.
CHEN Lixiang. Simulation Study on the Electromagnetic Field Distribution of Microwave Sintering/Welding Cavity for Structural Ceramics［D］. Qingdao：Ocean University of China， 2011.
［11］DINCOV D D， PARROTT K A. Computational Analysis of Microwave Heating Patterns in Resonant Multimode Cavities［C］∥ACM Symposium on Applied Computing. Nicosia， 2004：215-219.
［12］吕晶，陈利祥，聂贺峰，等. 试样几何参数对微波烧结腔电场分布的影响［J］. 青岛大学学报（自然科学版）， 2015， 28（3）：29-34.
LYU Jing， CHEN Lixiang， NIE Hefeng， et al. Influence of Sample Geometric Parameters on Electric Field Distribution in Sintering Cavity［J］. Journal of Qingdao University（Natural Science Edition）， 2015， 28（3）：29-34.
［13］杜君. 基于HFSS的微波烧结腔场分布的仿真研究［D］. 昆明：昆明理工大学， 2014.
DU Jun. Simulation Study on the Electromagnetic Field Distribution of Microwave Sintering Based on HFSS［D］. Kunming：Kunming University of Science and Technology， 2014.
［14］CROQUESEL J， MEUNIER C， PETIT C， et al. Design of an Instrumented Microwave Multimode Cavity for Sintering of Nuclear Ceramics［J］. Materials＆Design， 2021， 204：109638.
［15］TANG H， SHU X， HUANG W， et al. Rapid Solidification of Sr-contaminated Soil by Consecutive Microwave Sintering：Mechanism and Stability Evaluation［J］. Journal of Hazardous Materials， 2021， 407：124761.
［16］WANG X， LIU Z， TANG Y， et al. Low Temperature and Rapid Microwave Sintering of Na3Zr2Si2PO12 Solid Electrolytes for Na-ion Batteries［J］. Journal of Power Sources， 2021， 481：228924.
［17］SHAMAMI D Z， RABIEE S M， SHAKERI M. Use of Rapid Microwave Sintering Technique for the Processing of Magnesium-hydroxyapatite Composites［J］. Ceramics International， 2021， 47（9）：13023-13034.
［18］LI G R， WEN H R， WANG H M， et al. Microstructural Characteristics and Mechanical Behavior of Microwave-assisted Sintered Ferromagnetic FeCoNi1.5CrCu HEAp/Al Matrix Composites［J］. Journal of Alloys and Compounds， 2021， 861：158439.
［19］LIU Y， ZHU J， DAI B. Transparent MgAl2O4 Ceramics Prepared by Microwave Sintering and Hot Isostatic Pressing［J］. Ceramics International， 2020， 46（16）：25738-25740.
［20］ZHAO Z， ZHANG G， WANG S， et al. Preparation of Ultrafine Cemented Carbides with Uniform Structure and High Properties by Microwave Sintering［J］. Materials Letters， 2020， 260：126971.
［21］TANG S， LIU D， LI P， et al. Microstructure and Mechanical Properties of Functionally Gradient Cemented Carbides Fabricated by Microwave Heating Nitriding Sintering［J］. International Journal of Refractory Metals and Hard Materials， 2016， 58：137-142.
［22］EVANS A G， CHARLES E A. Fracture Toughness Determinations by Indentation［J］. Journal of the American Ceramic Society， 1976， 59：371-372.
［23］ZHU Zhiyong， YIN Zengbin， HONG Dongbo， et al. Preparation of Complex-shaped Al2O3/SiCp/SiCw Ceramic Tool by Two-step Microwave Sintering［J］. Ceramics International， 2020， 46：27362-27372.

[1]	衣明东, 王建平, 李传浩 , 许崇海, . 双重润滑条件下的刀具切削特性研究[J]. 中国机械工程, 2022, 33(05): 615-622.
[2]	郝兆朋, 韩雪, 范依航. 碳化硅增韧氧化铝基陶瓷刀具切削Inconel718合金的刀具界面行为研究#br#[J]. 中国机械工程, 2021, 32(09): 1009-1016.
[3]	刘景文, 周后明, 周文, 邓建新, 张高峰, 周友行. 基于固体润滑剂与原位反应双机制自润滑陶瓷刀具[J]. 中国机械工程, 2016, 27(15): 2069-2074.
[4]	刘志兵, 王西彬. 微细切削刀具及其相关技术研究进展 [J]. 中国机械工程, 2010, 21(14): 1758-1763.
[5]	邵芳;;刘战强;万熠;张宝国;高占雨;. 基于热力学的LT55陶瓷刀具加工45钢扩散与氧化磨损[J]. J4, 2009, 20(01): 0-23,4.
[6]	肖茂华;何宁;李亮;刘海滨;. 陶瓷刀具高速切削镍基高温合金沟槽磨损试验研究[J]. J4, 2008, 19(10): 0-1139.