[1]JAMWAL A, AGRAWAL R, SHARMA M, et al. Application of Optimization Techniques in Metal Cutting Operations:a Bibliometric Analysis[J]. Materials Today:Proceedings, 2020, 38(1):365-370.
[2]SHI Z, LI X, DUAN N, et al. Evaluation of Tool Wear and Cutting Performance Considering Effects of Dynamic Nodes Movement Based on FEM Simulation[J]. Chinese Journal of Aeronautics, 2020, 34(4):140-152.
[3]YU W, CHEN J, MING W, et al. Experimental and FEM Study of Cutting Mechanism and Damage Behavior of Ceramic Particles in Orthogonal Cutting SiCp/Al Composites[J]. Ceramics International, 2020, 47(5):7183-7194.
[4]NAGARAJ M S, EZHILARASAN C, JOHN P K, et al. Analysis of Multipoint Cutting Tool Temperature Using FEM and CFD [J]. Manufacturing Review, 2018, 5(16):26-34.
[5]CHEN G, REN C, YANG X, et al. Evidence of Thermoplastic Instability about Segmented Chip Formation Process for Ti-6Al-4V Alloy Based on the Finite-element Method[J]. Proceedings of the Institution of Mechanical Engineers, Part C:Journal of Mechanical Engineering, 2011, 225(6):1407-1417.
[6]HOPKINSON B. A Method of Measuring the Pressure Produced in the Detonation of High Explosives or by the Impact of Bullets[J]. Proceedings of the Royal Society of London, 1914, 89(612):411-413.
[7]DAVIES R M. A Critical Study of the Hopkinson Pressure Bar [J]. Philosophical Transactions of the Royal Society of London. Series A, Mathematical and Physical Sciences, 1948, 240(821):375-457.
[8]KOLSKY H. An Investigation of the Mechanical Properties of Materials at Very High Rates of Loading[J]. Proceedings of the Physical Society. Section B, 1949, 62(11):676-700.
[9]VENKATESAN K, DEVENDIRAN S, GOSWAMI B B, et al. Study of Forces, Surface Finish, and Tool Life on Machining of Inconel 718[J]. Advances in Manufacturing Technology, 2019:327-334.
[10]BAKSˇA T, MORVEK M, ZETEK M. Influence of the Coated Carbide Grade on the Cutting Tool Life When Machining Inconel 718[J]. Key Engineering Materials, 2016, 674:271-276.
[11]王相宇. 高温合金GH4169的切削加工性评价方法和本构模型研究[D]. 济南:山东大学, 2016.
WANG Xiangyu. Study on Cutting Performance Evaluation and Constitutive Model of Superally GH4169[D]. Jinan:Shandong University, 2016.
[12]姬芳芳. 高速切削GH4169切削区材料塑性行为研究[D]. 长春:长春工业大学, 2018.
JI Fangfang. Study on Plastic Behavior of GH4169 Cutting Zone in High Speed Cutting[D]. Changchun:Changchun University of Technology, 2018.
[13]周俊. 镍基高温合金GH4169高速切削相关技术与机理的研究[D]. 哈尔滨:哈尔滨工业大学, 2012.
ZHOU Jun. Research on Correlation Technique and Mechanism of High-speed Cutting Ni-based Superalloy GH4169[D]. Harbin:Harbin Institute of Technology, 2012.
[14]刘二亮, 邢宏伟, 王明明,等. Inconel625高温合金J-C本构建模[J]. 中国有色金属学报, 2018, 28(4):732-741.
LIU Erliang, XING Hongwei, WANG Mingming, et al. J-C Constitutive Modeling of High Temperature Alloys Inconel625[J]. The Chinese Journal of Nonferrous Metals, 2018, 28(4):732-741.
[15]赵娜. 高温合金Inconel625本构模型及切削过程仿真研究[D]. 哈尔滨:哈尔滨理工大学, 2016.
ZHAO Na. Study on the Constitutive Model and the Cutting Process Simulating of Super Alloy Inconel625[D]. Harbin:Harbin Institute of Technology, 2016.
[16]ABOTULA S, SHUKLA A, CHONA R. Dynamic Constitutive Behavior of Hastelloy X under Thermo-mechanical Loads[J]. Journal of Materials Science, 2011, 46(14):4971-4979.
[17]TIAN X, ZHAO J, YANG H, et al. High-speed Intermittent Turning of GH2132 Alloy with Si3N4/(W, Ti)C/Co Graded Ceramic Tool[J]. The International Journal of Advanced Manufacturing Technology, 2019, 100 (1/4):401-408.
[18]TIAN X, ZHAO J, QIN W, et al. Performance of Ceramic Tools in High-speed Cutting Iron-based Superalloys[J]. Machining Science and Technology, 2017, 21 (2):279-290.
[19]GUO H, ZHOU C, WANG K, et al. Simulation of Ultrasonic Vibration Cutting Performance of GH2132 Superalloy[J]. IOP Conference Series:Materials Science and Engineering, 2019, 493 (1):012162.
[20]王宝林. 钛合金TC17力学性能及其切削加工特性研究[D]. 济南:山东大学, 2013.
WANG Baolin. Study on the Mechanical Properties of Titanium Alloy TC17 and Characteristics in Machining[D]. Jinan:Shandong University, 2013.
[21]程晓茹, 李虎兴, 葛懋琦, 等.管线钢X65高温变形动态再结晶研究[J]. 金属学报, 1997(12):1275-1281.
CHENG Xiaoru, LI Huxing, GE Maoqi, et al. Dynamic Recrystallization of Steel X65 during High Temperature Deformation[J]. Acta Metallurgica Sinica, 1997(12):1275-1281.
[22]张锐杰. GH4169镍基高温合金动态力学性能研究[D]. 北京:北京理工大学, 2016.
ZHANG Ruijie. Study on Dynamic Mechanical Behaviors of GH4169 Nickel Based Superalloy[D]. Beijing:Beijing Institute of Technology, 2016.
[23]贾翠玲, 陈芙蓉. 7A52铝合金Johnson-Cook本构模型的改进及有限元模拟[J]. 内蒙古工业大学学报(自然科学版), 2019, 38(6):416-423.
JIA Cuiling, CHEN Furong. Modification of Johnson-Cook Constitutive Model and Finite Element Simulation of Aluminum Alloy 7A52[J]. Journal of Inner Mongolia University of Technology (Natural Science Edition), 2019, 38(6):416-423.
[24]唐长国, 朱金华, 周惠久. 金属材料拉伸的高应变率增塑现象及分析[J]. 材料研究学报, 1996(1):19-24
TANG Changguo, ZHU Jinhua, ZHOU Huijiu. A Phenomenon and Analysis of Plastisity-increasing Induced by High Strain Rate for Some Metallic Materials[J]. Chinese Journal of Materials Research, 1996(1):19-24.
[25]WANG X, HUANG C, ZOU B, et al. Dynamic Behavior and a Modified Johnson-Cook Constitutive Model of Inconel 718 at High Strain Rate and Elevated Temperature[J]. Materials Science & Engineering A, 2013, 580(15):385-390.
[26]王佳斌,丁军, 宋鹍, 等. 冲击载荷下20CrMnTi钢动态应力响应与考虑绝热温升修正J-C本构模型研究[J]. 机械强度, 2019, 41(5):1066-1070.
WANG Jiabin, DING Jun, SONG Kun, et al. Studied on Dynamic Stress Response of 20CrMnTi Steel under Impact Load and Considered for Adiabatic Temperature Rise Modification of the J-C Constitutive Model[J]. Journal of Mechanical Strength, 2019, 41(5):1066-1070.
[27]QIAN X, PENG X, SONG Y, et al. Dynamic Constitutive Relationship of CuCrZr Alloy Based on Johnson-Cook Model[J]. Nuclear Materials and Energy, 2020, 24:100768.
[28]JOHNSON G R, COOK W H. A Constitutive Model and Data for Metals Subjected to Large Strains, High Strain Rates and High Temperatures[J]. Engineering Fracture Mechanics, 1983, 21:541-548.
[29]李川平. Ti6Al4V钛合金动态本构模型与高速切削有限元模拟研究[D]. 兰州:兰州理工大学, 2011.
LI Chuanping. The Research on Dynamic Constitutive Model of Ti6Al4V Alloy Material and Finite Element Simulation of High-speed Cutting[D]. Lanzhou:Lanzhou University of Technology, 2011.
[30]中国航空材料手册编委会.中国航空材料手册:第2 卷,变形高温合金、铸造高温合金[M].北京:中国标准出版社, 2001:94.
China Aeronautical Materials Handbook Editorial Board. China Aeronautical Materials Handbook:Scroll 2, Wrought Superalloy, Cast Superalloy[M]. Beijing:Standards Press of China, 2001:94.
[31]刘鸿文. 材料力学 (Ⅰ) [M]. 北京:高等教育出版社, 2011:24.
LIU Hongwen. Mechanics of materials (Ⅰ) [M]. Beijing:Higher Education Press, 2011:24.
[32]黄西成, 胡文军. Johnson-Cook 本构参数的确定方法[C]∥中国力学学会爆炸力学实验技术专业组. 第六届全国爆炸力学实验技术学术会议论文集. 合肥:中国力学学会爆炸力学实验技术专业组, 2010:308-315.
HUANG Xicheng, HU Wenjun. Determination Method of Constitutive Parameters of Johnson-Cook[C]∥Proceedings of the Sixth National Symposium on Explosive Mechanics Experiment of China Mechanics Association. Hefei:Chinese Academy of Mechanics Explosion Mechanics Experiment Technology Specialty Group, 2010:308-315.
|