A Novel Guide-type Nozzle for Oil-air Lubrications

China Mechanical Engineering

Previous Articles Next Articles

A Novel Guide-type Nozzle for Oil-air Lubrications

LIU Muyuan1;GUO Feng1;JIAO Yihang1;PENG Shuling2;WANG Xi2

1.School of Mechanical Engineering， Qingdao University of Technology， Qingdao， Shandong， 266520
2.Yantai Huashun Machinery & Engineering Equipment Co.， Ltd.， Yantai， Shandong， 264670

Online:2018-06-10 Published:2018-06-08
Supported by:
Research Fund for the Doctoral Program of Higher Education of China（No. 20133721110002）
National Program on Key Basic Research Project (973 Program) （No. 2011CB706602）

一种新型导流式油气润滑喷嘴

刘牧原1;郭峰1;焦一航1;彭淑玲2;王希2

1.青岛理工大学机械工程学院，青岛，266520
2.烟台华顺机械工程设备有限公司，烟台，264670

基金资助:
高等学校博士学科点专项科研基金资助项目（20133721110002）；
国家重点基础研究发展计划（973计划）资助项目（2011CB706602）
Research Fund for the Doctoral Program of Higher Education of China（No. 20133721110002）
National Program on Key Basic Research Project (973 Program) （No. 2011CB706602）

Abstract

Abstract: A novel guide-type nozzle was designed herein， and some tests were carried out to study air parameters，jet flow properties， droplet sizes and droplet distributions.Comparisons were completed for this new nozzle and classical nozzles.Results show that the guide-type nozzle presents higher oil supply efficiency than that of the classical needle nozzle.For qualified lubrication performances，the new nozzle reduces lubricant supply by 40% and suppresses pressurized air consumption by 28%，which leads to direct energy and cost saving.

Key words: oil-air lubrication, bearing, nozzle, simulation, test

摘要： 设计了一种新型导流式油气润滑喷嘴，测试并比较了该类型喷嘴与普通针型喷嘴的气相参数、射流形态和产生的油滴尺寸及分布。试验结果表明，导流式喷嘴相对于针型喷嘴供油效率高，在保证润滑效果的同时，油气润滑系统的供油量可减少40%左右，压缩空气的消耗量可减少28%左右，降低了能耗，节约了成本。

关键词: 油气润滑, 轴承, 喷嘴, 仿真, 试验

CLC Number:

TH117.2

LIU Muyuan1;GUO Feng1;JIAO Yihang1;PENG Shuling2;WANG Xi2. A Novel Guide-type Nozzle for Oil-air Lubrications[J]. China Mechanical Engineering.

刘牧原1;郭峰1;焦一航1;彭淑玲2;王希2. 一种新型导流式油气润滑喷嘴[J]. 中国机械工程.

References

[1]杨和中，刘厚飞.TURBOLUB油气润滑技术（五）[J].润滑与密封，2003（5）：92-95.
YANG Zhonghe，LIU Houfei.TURBOLUB Oil-air Lubrication Technology（5）[J].Lubrication Engineering，2003（5）：92-95.
[2]宇征.油气润滑应用于滚动轴承的发展现状[J].哈尔滨轴承，2011，32（2）：72-73.
HE Yuzheng.Current Situation of Oil-gas Lubrication Applied in Rolling Bearing[J].Journal of Harbin Bearing，2011，32（2）：72-73.
[3]MOON J H，LEE H D， KIM S I.Lubrication Characteristics Analysis of an Air-oil Lubrication System Using an Experimental Design Method[J].International Journal of Precision Engineering & Manufacturing， 2013， 14（2）：289-297.
[4]蒋天合，张保.油气润滑应用在高速轴承中的实验研究[J].机械制造与自动化，2008，37（4）：29-32.
JIANG Tianhe，ZHANG Bao.Experimental Research on Oil-air Lubrication for High Speed Ball Bearing[J].Machine Building & Automation，2008，37（4）：29-32.
[5]王建文，巩彬彬，刘俊，等.滚动轴承油气润滑性能的试验研究[J].华东理工大学学报（自然科学版）， 2007，33（3）：436-440.
WANG Jianwen，GONG Binbin，LIU Jun，et al.Behavior of Oil-air Lubrication Using in Roller Bearing System[J].Journal of East China University of Science and Technology（Natural Science Edition），2007，33（3）： 436-440.
[6]WU C H， KUNG Y T.A Parametric Study on Oil/Air Lubrication of a High-speed Spindle[J].Precision Engineering，2005，29：162-167.
[7]巩彬彬，张俊国，王建文，等.油气润滑滚动轴承试验装置的研制[J].机械科学与技术，2007，26（2）： 181-183.
GONG Binbin，ZHANG Junguo，WANG Jianwen，et al.Research and Development of an Experimental Device for a Rolling Bearing Lubricated with Oil and Air[J].Mechanical Science and Technology，2007，26（2）： 181-183.
[8]LACEY SE J，KEMBLE A，ITOH N.Performance Characteristics of Fixed Preload Large Bore Angular Contact Ball Bearings for Machine Tools[J].Motion & Control，NSK，1997（2）：36-42.
[9]JIANG S，MAO H.Investigation of the High Speed Rolling Bearing Temperature Rise with Oil-air Lubrication[J].Journal of Tribology，2011，133（2）：655-664.
[10]张友平.气液润滑喷嘴的CAE分析研究[D].武汉：武汉理工大学， 2007.
ZHANG Youping.CAE Analysis of Oil-air Nozzle[D].Wuhan：Wuhan University of Technology，2007.
[11]AKAMATSU Y，MORI M.Minimizing Lubricant Supply in an Air-oil Lubrication System[J].NTN Technical Review，2004，72：12-19.
[12]刘牧原，方志敏，栗心明，等.滚动轴承油气润滑性能测试系统[J].工程与试验，2015，55（3）：77-80.
LIU Muyuan，FANG Zhimin，LI Xinmin，et al.Testing System for Oil-air Lubricating Property of Rolling Bearing[J].Engineering & Test，2015，55（3）：77-80.

[1]	WANG Li-Cun, CHEN Jin, ZHANG Xian-Meng, CHEN Guo-Jiang. Study on Geometry Theory of Variable Wall Thickness Scroll Profiles and Shape Optimization Based on Functional Theory [J]. J4, 201016, 21(16): 1898-1901.
[2]	TUN Fu-Chao, TUN Bai-Hu, ZHANG Xiu-Hua. Numerical Simulation of Heat Transfer Performance of Paraffin Thermal-Sensitive Valve  [J]. J4, 201016, 21(16): 1921-1926.
[3]	HU Chao, LIU Zuo-Min. Research on Rolling Bearing’s Heathcote’s Stick-slip Model Based on Materials Compatibility [J]. J4, 201016, 21(16): 1969-1973.
[4]	DONG Guo-Jiang, DIAO Chang-Cai, CAO Miao-Yan, HAO Hai-Bin, YANG Dong-Feng. Study on Wall-thickness and Deformation Regularity of Cylinder Part Based on Solid Granules Medium Forming [J]. J4, 201016, 21(16): 1992-1998.
[5]	SHI Yansong, LU Fei, ZHOU Zhigang, BEN Xiaokang. Dynamic Performance of Finger Seals under Rotor Tilt Conditions [J]. China Mechanical Engineering, 2026, 37(1): 126-134.
[6]	WU Jianpeng, DING Ao, MA Biao, LI Heyan, WANG Liyong, YANG Chengbing. Failure Probability Analysis of Temperature Field in Wet Friction Components Based on Macro-Micro Frictional Contact Model [J]. China Mechanical Engineering, 2026, 37(1): 40-50.
[7]	ZHU Qianye, FENG Shangyu, SHI Yanbin, PU Jibin. Friction and Wear Properties of MoS₂/Zn Films under Vacuum Atomic Oxygen Irradiation [J]. China Mechanical Engineering, 2026, 37(1): 83-91.
[8]	DANG Xu, LIU Tao, YAN Min, XU Zhiwei. Multi-objective Optimization of Precision Milling Parameters for Variable Cross-section Scrolls [J]. China Mechanical Engineering, 2025, 36(12): 2854-2861.
[9]	FU Boyu, XU Zehua, LI Kangshuai, WANG Haoyu, HE Jiaqi, HE Qiang. Numerical Simulation and Experimental Analysis of Propeller Flow Fields and Motor Temperature Fields in High-altitude Environments for UAVs [J]. China Mechanical Engineering, 2025, 36(12): 2894-2902.
[10]	TONG Zhaojing, WANG Pengchao, FAN Yongkui, HAN Guangyang, WANG Ziqi. Fault Diagnosis Method of Rolling Bearings Based on Improved Refined Composite Multiscale Sample Entropy and Bayesian Network [J]. China Mechanical Engineering, 2025, 36(12): 2952-2959.
[11]	ZHANG Xiong, DONG Lecong, WANG Wenqiang, QU Weiying, WAN Shuting. A Multi-fault Diagnosis Method for Rolling Bearings Integrating Two-dimensional Convolutional and GRU [J]. China Mechanical Engineering, 2025, 36(12): 2978-2985.
[12]	LYU Qian, LIU Weiwei. Molecular Dynamics Simulation and Parameter Optimization Research for Abrasive Flow Finishing of Additive Manufactured Nozzle Convergent and Divergent Sections [J]. China Mechanical Engineering, 2025, 36(12): 3017-3022.
[13]	Fujian SUN, Qianfang ZHU, Zhiqiang LIANG, Yanjun LU, Jinlong CHEN, Yubin XIAO, Hao HUANG, Jianping YUAN. Research on Tribological Properties of Hardened Bearing Steel Surfaces by Electric Pulse Assisted Hard Turning [J]. China Mechanical Engineering, 2025, 36(11): 2537-2543.
[14]	Yunfeng LI, Jincheng LI, Zhidan ZHONG. Temperature Field Analysis of Main Bearings in Wind Turbines Based on Thermal Network Method [J]. China Mechanical Engineering, 2025, 36(11): 2624-2632.
[15]	Zhiyuan QIAN, Nianhuan LI, Junye LI, Jun LI, Chao HAN, Haihong WU. Axial Contact Position Testing Method of Conductive Slip Rings Based on Visual Inspection Technology and Profilometric Design [J]. China Mechanical Engineering, 2025, 36(11): 2641-2651.

A Novel Guide-type Nozzle for Oil-air Lubrications

一种新型导流式油气润滑喷嘴

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics