Simulation Research of Parallel Hydraulic Hybrid Excavator

Abstract

Abstract:

Due to the power transmission structures of the traditional excavators, the relevant methods can not help the distribution of working points of the engine. So a hydraulic hybrid technology and its control scheme was proposed herein. The working conditions were analyzed and the structures of hydraulic hybrid excavator were introduced. A parallel hydraulic hybrid system was chosen for simulation. The load of an actual excavator was used as input of the system. The parallel hydraulic hybrid excavator

demonstrates that it can stabilize the engine speed,increase the efficiency and optimize the drivability.

Key words: hydraulic hybrid, parallel, save energy, engine speed, hydraulic excavator

摘要：

针对传统液压挖掘机由于其固有的动力传递结构而无法通过相关的节能方法来改善发动机工作点分配的问题,提出了一种基于油液混合动力技术的挖掘机动力系统控制方案。分析了挖掘机的工况特点,介绍了油液混合动力挖掘机的原理结构。选用并联油液混合动力挖掘机系统进行仿真建模,以实测液压挖掘机负载作为仿真模型输入,对该系统性能进行了仿真研究。仿真结果表明,并联式油液混合动力挖掘机发动机转速稳定,工作点分布于高效区,燃油效率得到提高,动力源的动力特性得到改善。

关键词:

油液混合, 并联, 节能, 发动机转速, 液压挖掘机

CLC Number:



ZHANG Min-Jie, WANG Qiang-Jiu, GUAN Cheng. Simulation Research of Parallel Hydraulic Hybrid Excavator[J]. China Mechanical Engineering, 2010, 21(16): 1932-1936.

张敏杰, 王庆九, 管成.

并联式油液混合动力挖掘机动力系统仿真研究

[J]. 中国机械工程, 2010, 21(16): 1932-1936.

[1]	LI Meng-Lei, GU Yo-Qin, ZHANG Hua-Liang, LIU Li-Qin, DU Juan, WEN Chu-Hua, LAN Guo-Sheng. Parallel Mechanism Structure Optimization Design Based on Multi-objective Differential Evolution Algorithm [J]. J4, 201016, 21(16): 1915-1920.
[2]	LU Kai-Jiang, SHI Dun-Beng, ZHANG Feng-Chao. Dynamics Optimization Design of Planar 3-DOF Parallel Mechanism [J]. J4, 201016, 21(16): 1926-1931.
[3]	ZHANG Min-Jie, WANG Qiang-Jiu, GUAN Cheng. Simulation Research of Parallel Hydraulic Hybrid Excavator [J]. J4, 201016, 21(16): 1932-1936.
[4]	ZHU Xiao, SHEN Huiping, LI Ju, LI Tao, YE Pengda, ZHU Wei. Topological Design and Performance Analysis of 3-DOF Parallel Mechanisms with Alternately Used Moving Platforms [J]. China Mechanical Engineering, 2026, 37(1): 114-125.
[5]	MENG Deyuan, ZHANG Meng, LIU Songyong, TANG Chaoquan. High Precision Position and Posture Control of 6-DOF Parallel Platforms Driven by Pneumatic Muscles [J]. China Mechanical Engineering, 2026, 37(1): 73-82.
[6]	NI Tao, ZHAO Yahui, ZHAO Zeren, YANG Kaiqiang. Dynamics Modeling and Base Dynamics Parameter Determination of 6-UPRU Parallel Manipulators [J]. China Mechanical Engineering, 2025, 36(12): 2911-2919.
[7]	Hengyi LEI, Xuesong DU, Zilong JIANG, Caichao ZHU. New Parallel Compound Movable Tooth Transmission Principle and Its Meshing Characteristics [J]. China Mechanical Engineering, 2025, 36(11): 2517-2524.
[8]	Shijie SU, Yongqin CHENG, Yi HU, Jianhui HE, Shuji YANG. Coordination Control of Dual-valve Electrohydraulic Servo Systems Based on Integration of Reinforcement Learning and Adaptive Robust Control [J]. China Mechanical Engineering, 2025, 36(10): 2335-2342.
[9]	Ningning HUANG, Jingjing YOU, Pengda YE, Huiping SHEN, Chenggang LI, Hongtao WU. Forward Kinematics and Singularity of Kinematically Decoupled Stewart-type Parallel Mechanisms [J]. China Mechanical Engineering, 2025, 36(09): 1951-1960.
[10]	Zhiwei ZHOU, Jian GAO, Lanyu ZHANG. A Model-free Cross-coupling Control Method for Parallel Kinematic Mechanisms with Symmetric Structure [J]. China Mechanical Engineering, 2025, 36(08): 1691-1699.
[11]	Ju LI, Yue GUO, Huiping SHEN, Qinmei MENG, Xiaoyang GU. Optimization Principle and General Method for Multiple Topology Decoupling of Parallel Mechanisms [J]. China Mechanical Engineering, 2025, 36(08): 1700-1712.
[12]	Xingyu ZHAO, Tieshi ZHAO, Bo XU, Xiangquan LIU, Yufei QIN. Kinematics and Transmission Performance Analyses of Parallel Hybrid Drive Mechanisms [J]. China Mechanical Engineering, 2025, 36(08): 1728-1739.
[13]	Yuqiang AN, Yuan ZHANG, Ping ZOU, Yifei TAO. IMODE Algorithm for Solving Cigarette Product Production Scheduling Problems Based on Lot-size Splitting Mechanism [J]. China Mechanical Engineering, 2025, 36(08): 1893-1903.
[14]	HAN Feiyan, ZHAO Yipeng, LI Hongyang, ZHANG Hao, WANG Che, PENG Xianlong, ZHANG Chuanwei. Multi-tool Optimization Milling Method for Complex Cavities Based on Tool Allowable Loads [J]. China Mechanical Engineering, 2025, 36(05): 986-994.
[15]	XU Yuze, LU Zhongyue, ZHU Yiming, LUO Zirong. Kinematics and Dynamics Modeling and Experiments of OmnilLegs [J]. China Mechanical Engineering, 2025, 36(04): 811-820.

Simulation Research of Parallel Hydraulic Hybrid Excavator

并联式油液混合动力挖掘机动力系统仿真研究

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics