Research on Fracture Simulation of Wheel Hubs for Small Overlap Crashs

doi:10.3969/j.issn.1004-132X.2021.13.008

China Mechanical Engineering ›› 2021, Vol. 32 ›› Issue (13): 1571-1576,1583.DOI: 10.3969/j.issn.1004-132X.2021.13.008

Previous Articles Next Articles

Research on Fracture Simulation of Wheel Hubs for Small Overlap Crashs

ZHENG Hao;OUYANG Jun;WANG Yuchao;LI Wei;ZENG Zicong;HUANG Yi;LIU Heng

Automotive Engineering Institute，Guangzhou Automobile Group Co.，Ltd.，Guangzhou，511434

Online:2021-07-10 Published:2021-07-16

面向小偏置碰的轮毂断裂模拟研究

郑颢;欧阳俊;王玉超;李伟;曾子聪;黄毅;刘衡

广州汽车集团股份有限公司汽车工程研究院，广州，511434

通讯作者: 李伟（通信作者），男，1987年生，工程师。研究方向为汽车碰撞安全。E-mail：liwei2@gacrnd.com。
作者简介:郑颢，男，1982年生，工程师。研究方向为汽车碰撞安全。E-mail：zhenghao@gacrnd.com。

Abstract

Abstract: In order to predict the crash fracture behavior of wheel hubs precisely， the material fracture mechanics tests for AlSi7（casting aluminum） were carried out and material characterization parameter fitting method was studied based on CrachFEM failure criterion. Modeling rules of finite element and methods of material failure parameter modification suitable for wheel hub fracture simulation were proposed，the simulation results of crash fracture mode for wheel hubs are more consistent with the test results according to the comparative analysis of quasi-static and dynamic tests and simulations for wheel hubs. The results show that the accuracy of crash fracture simulation is improved after using the proposed modeling rules and methods， which may provide effective method of virtual simulation evaluation for small overlap crashs.

Key words: casting aluminum wheel hub, crash fracture prediction, CrachFEM failure criterion, simulation accuracy

摘要： 为准确地模拟轮毂的碰撞断裂失效行为，开展了AlSi7（铸铝）材料的断裂力学试验，基于CrachFEM失效准则研究了材料特性参数拟合方法。根据轮毂的准静态和动态试验与仿真对比分析，提出了适用于轮毂断裂模拟的有限元建模规则和材料失效参数调整方法，使轮毂碰撞断裂模式的仿真结果更贴合试验结果。研究结果表明：利用所提建模规则与方法显著提高了碰撞模拟的失效预测精度，可为小偏置碰的安全性能开发提供有效的虚拟仿真评估手段。

关键词: 铸铝轮毂, 碰撞断裂预测, CrachFEM失效准则, 仿真精度

CLC Number:

ZHENG Hao, OUYANG Jun, WANG Yuchao, LI Wei, ZENG Zicong, HUANG Yi, LIU Heng. Research on Fracture Simulation of Wheel Hubs for Small Overlap Crashs[J]. China Mechanical Engineering, 2021, 32(13): 1571-1576,1583.

郑颢, 欧阳俊, 王玉超, 李伟, 曾子聪, 黄毅, 刘衡. 面向小偏置碰的轮毂断裂模拟研究[J]. 中国机械工程, 2021, 32(13): 1571-1576,1583.

References

［1］李林峰，刘卫国，张君媛，等.基于25%小偏置正面碰撞的某乘用车前端结构改进设计［J］.中国机械工程， 2015， 26（17）：2400-2405.
LI Linfeng， LIU Weiguo， ZHAN Junyuan， et al.Design and Improvement of a Passenger Vehicle Frontal Structure Based on 25% Small Overlap Frontal Crash［J］.China Mechanical Engineering， 2015 ，26（17）：2400-2405.
［2］胡远志，梁锐，刘西，等.某轿车小偏置碰撞结构耐撞性优化［J］.重庆理工大学学报（自然科学）， 2018， 32（2）：1-9.
HU Yuanzhi， LIANG Rui， LIU Xi， et al. Body Op-timization of a Sedan in Small Overlap Impact［J］.Journal of Chongqing University of Technology（Natural Science）， 2018， 32（2）：1-9.
［3］冯悦，肖守讷，朱涛，等.考虑材料失效准则的吸能装置失效行为与碰撞特性［J］.中南大学学报（自然科学版）， 2019， 50（2）：487-496.
FENG Yue， XIAO Shoune， ZHU Tao， et al. Failure Behavior and Collision Characteristics of Energy-absorbing Structures Considering Material Failure Criteria［J］.Journal of Central South University（Science and Technology）， 2019， 50（2）：487-496.
［4］吴长鹏，谢斌，潘锋，等.汽车动力总成悬置的碰撞失效模拟研究［J］.汽车工程， 2019， 41（1）：36-41.
WU Changpeng， XIE Bing， PAN Feng， et al.A Study on Crash Failure Simulation of Vehicle Engine Mounts［J］.Automotive Engineering， 2019， 41（1）：36-41.
［5］邓云飞，张永，张伟岐，等.断裂准则对TC4钛合金板抗卵形头弹冲击的影响［J］.中国机械工程， 2019， 30（19）：2378-2384.
DENG Yunfei， ZHANG Yong， ZHANG Weiqi， et al. Effects of Fracture Criterion on TC4 Titanium Alloy Plates against Impacts of Ogival-nosed Proectiles［J］.China Mechanical Engineering， 2019， 30（19）：2378-2384.
［6］周梦成，冯飞，胡建华，等.AZ31B镁合金断裂应变与应力三轴度的关系研究［J］.中国机械工程， 2015， 26（5）：694-698.
ZHOU Mengcheng， FENG Fei， HU Jianhua， et al.Research on Relationship of AZ31B Magnesium Alloy Fracture Strain and Stress Triaxiality［J］.China Mechanical Engineering， 2015， 26（5）：694-698.
［7］赖兴华，王磊，李洁，等.铝型材防撞梁的碰撞断裂失效表征［J］.清华大学学报（自然科学版）， 2017，57（5）：504-510.
LAI Xinhua， WANG Lei， LI Jie， et al. Characterization of the Fracture of an Aluminum Alloy Anticollision-beam to Impact Loading［J］. Journal of Tsinghua University（Science and Technology）， 2017， 57（5）：504-510.
［8］叶拓，吴远志，刘安民，等.挤压态6013-T4铝合金在动态冲击载荷下的变形行为及其微观机理［J］.材料研究学报， 2019， 33（2）：109-116.
YE Tuo， WU Yuanzhi， LIU Anmin， et al. Deformation Behavior and Micro-mechanism of As-extruded 6013-T4 Al Alloy under Dynamic Impact Loading［J］.Chinese Journal of Materials Research， 2019， 32（2）：109-116.
［9］刘国承，王超，宋燕利，等.各向异性材料流动应力模型研究［J］.华中科技大学学报（自然科学版）， 2018， 46（8）：45-49.
LIU Guocheng， WANG Chao， SONG Yanli， et al.Investigation of Flow Stress Models for Anisotropic Materials［J］.Journal of Huazhong University of Science and Technology（Natural Science Edition）， 2018， 46（8）：45-49.

[1]	LI Wei, ZHENG Hao, LIU Yanmei, FAN Song. Numerical Simulation on Mounted Bolt Failures in Vehicle Subframe [J]. China Mechanical Engineering, 2022, 33(19): 2388-2393.
[2]	Gu Zhengqi, Zhu Yifan, Zhang Sha, Ma Xiaokui. Identification of Mining Road Roughness Based on GA-BP Neural Network [J]. China Mechanical Engineering, 2014, 25(23): 3232-3238.
[3]	ZHOU Ze, LI Guang-Yao, CHENG Ai-Guo, DIAO Min. A New Method for Body Structure Analysis Based on Stress Recovery of Submodel [J]. China Mechanical Engineering, 2013, 24(12): 1671-1675.

Research on Fracture Simulation of Wheel Hubs for Small Overlap Crashs

面向小偏置碰的轮毂断裂模拟研究

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 3

Recommended Articles

Metrics