Research on Friction Resistance of Circular Shear Cell Filled with Steel Granule

Abstract

Abstract:

In order to study the movement and lubrication characteristics of granular flow in the tribo-pairs, a circularity shear cell was constructed to simulate the shear movement of infinite parallel plate and observe the dynamic behavior of granule in the tribo-pairs. The surface structure, speed, particle size and the number of particles were changed to study the movement characteristics of granule and its effects on the tribo-pairs. The results show that: boundary conditions and particle properties have great effects on the movement characteristics of granular flow, and the shear dilatancy phenomenon which may cause the vibration are strongly related to the particle arch and its inherent force chain.

Key words: granular flow, shear, movement characteristics, dilatancy

摘要：

为了研究颗粒流在摩擦副间隙中的运动和润滑特性,构建了一个双筒剪切装置来模拟无限剪切运动,并观察颗粒受剪切时所表现的特有现象。实验通过改变双筒的表面结构、转速、颗粒尺度和数量等因素来研究颗粒流的运动特性和对摩擦副的影响。结果表明：摩擦副表面越粗糙、颗粒数量越多、颗粒尺度越小,摩擦力越大;在剪切实验中,颗粒流表现出剪切膨胀现象,进而造成振动,其成因与颗粒架拱及强力链有关。

关键词:

颗粒流, 剪切, 运动特性, 膨胀

CLC Number:

TH117.2

ZHANG Ba-Beng, WANG Wei, LIU Kun.

Research on Friction Resistance of Circular Shear Cell Filled with Steel Granule

[J]. China Mechanical Engineering, 2011, 22(15): 1832-1836.

张伯平, 王伟, 刘焜.

颗粒介质双筒剪切单元摩擦阻力的研究

[J]. 中国机械工程, 2011, 22(15): 1832-1836.

[1]	YANG Zihao, FAN Zenghua, ZHANG Xiang, GAO Jun. Research on Chemical-assisted Magnetorheological Shear Thickening Polishing of Titanium Alloy Tube Inner Surfaces [J]. China Mechanical Engineering, 2025, 36(12): 2846-2853.
[2]	NIU Guofa1, JI Xiaogang1, 2, WANG Wei1, WANG Guangyang1. Study on In-plane Shear Behavior and Interaction Mechanism of Flexible Elastic Composite Lattice Structures [J]. China Mechanical Engineering, 2025, 36(05): 1103-1110.
[3]	GUO Luguang1, 2, DAI Zhuohao1, WANG Dongfeng1, 3, WANG Xu1, LYU Binghai1, YUAN Julong1. Effects of Force Rheological Polishing Processes on Surface Quality and Accuracy of Bearing Raceways [J]. China Mechanical Engineering, 2025, 36(02): 271-279.
[4]	WANG Xuan1, YAO Kaifei1, YUAN Weiqiang1, WANG Kuikui2, YU Jixuan2, ZHANG Yi3. Tensile-shear Property of Composite Secondary Bonding Joints with Resistance Heating Technology [J]. China Mechanical Engineering, 2025, 36(01): 152-159.
[5]	GUO Chuang, ZHAO Erhui, QUAN Long, WANG Chengwen. Study on Influences of Load on Oil Film Interface Slip and Elastohydrodynamic Lubrication Characteristics [J]. China Mechanical Engineering, 2024, 35(09): 1567-1574.
[6]	QI Maofu, SUN Yuantao, TIAN Chunlei, FENG Jiaqi. Shear Failure Mechanism Analysis and Optimum Design of 850 Ton Cold Shear Based on Orthogonal Test [J]. China Mechanical Engineering, 2024, 35(04): 752-759.
[7]	YUAN Rongfu, WU Min, HU Zeqi, FENG Wei, WANG Rongcheng, XU Jin, . Analysis of Surface Gradient Decarburization in Automotive Front Axle Bending Based on n-Order Shear Deformation Theory [J]. China Mechanical Engineering, 2024, 35(03): 414-426.
[8]	WANG Fulin, XIAO Qiang, LAI Shuning, TANG Nengyi. Reverse Identification of Constitutive Parameters of ZM5 Magnesium Alloy Based on Unequal Shear Model#br# #br# [J]. China Mechanical Engineering, 2023, 34(19): 2362-2369.
[9]	DING Chuan, ZHANG Lichao, XIA Ning, CHEN Haoqi, RUAN Jian, MENG Bin, . Experimental Study of Shear Cavitation in Two-dimensional Piston/Cylinder Pairs Micro-gap Flow Fields [J]. China Mechanical Engineering, 2023, 34(12): 1395-1406.
[10]	FU Yuantao, WEN Donghui, KONG Fanzhi, GAN Zuokun, CHENG Zhichao, . Research on Characteristics of Flow Fields during LHP Processes [J]. China Mechanical Engineering, 2023, 34(11): 1306-1314.
[11]	TANG Lubin, WEN Donghui, KONG Fanzhi, YUAN Qiaoling, . Research on Wall Effect of Abrasive Flow Machining [J]. China Mechanical Engineering, 2023, 34(09): 1077-1085.
[12]	LI Hongyu, HUANG Xiangming, MING Yang, LI Xiyang, ZENG Qing, ZHOU Dongdong. Simulation and Experimental Study of Magnetic Field-assisted Shear Thickening Fluid Polishing for Cemented Carbide Blades [J]. China Mechanical Engineering, 2023, 34(06): 650-659.
[13]	QI Panguo, LIU Zhengqi, ZHAO Liwei, ZHANG Xingyuan, ZHAO Lijuan. Research on Problem of Feedback Mechanism Clearances of a Digital Hydraulic Cylinder for Shearer Rocker Arms [J]. China Mechanical Engineering, 2023, 34(02): 172-184.
[14]	NI Jing, SUN Jingbo, HE Lihua, CUI Zhi, XUE Fei. Study on Chip Forming Characteristics of Orthogonal Cutting of PTFE Materials [J]. China Mechanical Engineering, 2022, 33(22): 2733-2740.
[15]	CAI Zhuoyue, TU Jun, ZHANG Xu, DENG Zhiyang, WU Qiao, SONG Xiaochun, . Design of Oblique Incident Line-focusing SV Wave Electromagnetic Acoustic Transducer for Thick-walled Aluminum Tubes [J]. China Mechanical Engineering, 2022, 33(07): 804-810.