PEEK摩擦信号分形维数与表面形貌相关性试验研究

中国机械工程 ›› 2011, Vol. 22 ›› Issue (14): 1715-1719.

PEEK摩擦信号分形维数与表面形貌相关性试验研究

李超;焦瑜;张静;赵嫚

兰州理工大学,兰州,730050

出版日期:2011-07-25 发布日期:2011-07-28
基金资助:
国家自然科学基金资助项目(50975132)；兰州理工大学博士基金资助项目(BS05200906)
National Natural Science Foundation of China（No. 50975132）

Research on Correlation of Friction Signals and Surface Topography of PEEK

Li Chao;Jiao Yu;Zhang Jing;Zhao Man

Lanzhou University of Technology,Lanzhou,730050

Online:2011-07-25 Published:2011-07-28
Supported by:
National Natural Science Foundation of China（No. 50975132）

摘要/Abstract

摘要：

为研究聚醚醚酮树脂/球墨铸铁摩擦副磨合初期摩擦信号分形维数与聚醚醚酮初始表面形貌分形维数的相关性,在UMT-3MT摩擦磨损试验机上对聚醚醚酮树脂/球墨铸铁摩擦副进行了摩擦磨损试验，运用结构函数测度法对初始表面形貌、摩擦力信号、摩擦因数信号进行了分形表征，计算得到了不同载荷下的分形维数。研究结果表明，聚醚醚酮初始表面和摩擦信号均具有显著的分形特征;在相同速度、相同初始表面下，摩擦信号的分形维数随着载荷的增大而增大;在相同速度、不同载荷下，磨合初期摩擦信号的分形维数均与初始表面分形维数负相关。

关键词:

聚醚醚酮树脂/球墨铸铁, 表面形貌, 摩擦力, 摩擦因数, 分形维数, 结构函数

Abstract:

In order to investigate the correlation of friction force and coefficient signals of PEEK/QT400 and initial surface topography of PEEK,friction and wear tests of PEEK/QT400 were carried out on an UMT-3MT wear tester with same velocity and different loads.The fractal behaviors of initial surfaces topography and friction signals were studied with fractal theory and the fractal dimension of them were calculated using structure function measurement method.Results show that the initial surface of PEEK and friction signals both have obvious fractal characteristics,under the same velocity and same initial surface,the value of fractal dimension increases with the increases of contact load,and under the same velocity and different loads,friction signals of preliminary

running-in stage and initial surfaces of PEEK are both positive correlations.

Key words:

PEEK(poly (ether-ether-ketone))/QT400, surface topography, friction force, friction coefficient, fractal dimension, structure function

中图分类号:

TH117.2

李超, 焦瑜, 张静, 赵嫚.

PEEK摩擦信号分形维数与表面形貌相关性试验研究

[J]. 中国机械工程, 2011, 22(14): 1715-1719.

LI Chao, JIAO Yu, ZHANG Jing, DIAO Man.

Research on Correlation of Friction Signals and Surface Topography of PEEK

[J]. China Mechanical Engineering, 2011, 22(14): 1715-1719.

导出引用管理器 EndNote|Ris|BibTeX

链接本文: https://www.cmemo.org.cn/CN/

https://www.cmemo.org.cn/CN/Y2011/V22/I14/1715

参考文献

[1]李超[1],刘振全[1],王君[1].燃料电池用无油润滑涡旋压缩机研究[J].润滑与密封,2008(6):74-76.
[2]房师毅[1],李连生[1],束鹏程[1],杨传波[1].无油润滑涡旋式空气压缩机的工作过程研究[J].中国机械工程:123-127.
[3]李海生[1],刘振全[1],彭斌[2],陈英华[1],王作洪[1].无油润滑涡旋压缩机齿端面密封的研究[J].润滑与密封:108-110.
[4]Wang L,Zhao Y,Li I.,et al. Research on Oil--free Hermetic Refrigeration Scroll Compressor[J].Proc. IMechE,Part A: J. Power and Energy, 2007,221 : 1049-1056.
[5]赵远扬[1],李连生[1],马丽强[1],卜高选[1],束鹏程[1].散热对无油涡旋空气压缩机性能影响的实验研究[J].西安交通大学学报:5-8.
[6]王建军.花岗石抛光表面分形维数与光泽度关系及分彤物理意义的研究.中国机械上程,2007,:2362-2366.
[7]Whitehouse D J. Surface Topography and Quality and Its Relevance to Wear[C]//Massachusetts In- stitute of Technology Conference on Wear. Cam bridge, 1970:17-50.
[8]Mandelbrot B B. The Fractal Geometry of Nature [M]. San Franeisco:W. H. Freeman,1982.
[9]Berry M V, I.ewis Z V. On the Weierstrass-Man delbrot Fractal Function[J]. Proc. R Soc. l.ondon,Ser. A,1980,370(1743):459-484.
[10]Majumdar A,Bhushan B. Role of Fractal Geometry in Roughness Characterization and Contact Me- chanics of Surfaces[J]. Journal of Tribology, 1990, 112(4) : 205-216.
[11]朱华[1],葛世荣[1].结构函数与均方根分形表征效果的比较[J].中国矿业大学学报,2004,33(4):396-399.
[12]王安良,杨春信.机械加工表面形貌分形特征的计算方法[J].中国机械工程,2002,13(8):714-718.
[13]吴兆宏[1],朱华[1],李刚[1].摩擦信号分形维数与载荷和速度的关系研究[J].摩擦学学报:161-165.
[14]朱华[1],葛世荣[1].摩擦力和摩擦振动的分形行为研究[J].摩擦学学报:433-437.
[15]Li G B,Guan D L,Wei H J. Study on Single Fractal and Multifractal of Frictional Forces in the Running - in Process[J].Tribology, 2006,26 (5) : 467-471.