YANG Yanling, YU Jing, LIN Ximeng, CAI Jinhui. Optimal Design of Contact Probes for Three-dimensional Thread Measuring Machines#br#[J]. China Mechanical Engineering, 2021, 32(15): 1812-1817.
[1]陈盛. 触针扫描式螺纹综合测量仪中的关键技术研究[D]. 南京:南京航天航空大学, 2015.
CHEN Sheng. Research on Crucial Technology of the Thread Measurement Instrument by Probe Scanning[D]. Nanjing:Nanjing University of Aeronautics and Astronautic, 2015.
[2]JING Min. Measurement Method of Screw Thread Geometric Error Based on Machine Vision[J]. Measurement and Control, 2018, 51(7/8):304-310.
[3]SCHADEL S, WEDMANN A, STEIN M. Advanced Screw Tthread Metrology Using an Areal Measuring Strategy and a Holistic Evaluation Method[J]. Measurement Science and Technology, 2019, 30(7):075009-075023.
[4]ZHANG Xutao, GAO Feng, LI Yan, et al. Research on Non-contact Measurement Method of Ball Screw Nut Based on Spectral Confocal Principle[C]∥IEEE International Conference on Electronic Measurement & Instruments. Yangzhou, 2017:1100-1105.
[5]刘盼. 基于螺纹综合扫描仪的螺纹参数测量方法研究[J]. 航空制造技术, 2017(13):100-104.
LIU Pan. Research on Measuring Method of Thread Parameters Based on Thread Integrated Scanner[J]. Aeronautical Manufacturing Technology, 2017(13):100-104.
[6]赵宇. 曲面接触式测量测头预行程误差的研究[D]. 重庆:重庆理工大学, 2013.
ZHAO Yu. Study on Pre-travel Error in Contact Measurement on Surface[D]. Chongqing:Chongqing University of Technology, 2013.
[7]LIU Fangfang, WANG Jingfan, CHEN Lijuan, et al. Development and Characterization of a High-sensitivity Fiber Bragg Grating-based Vbrating Nano-probe for 3D Measurement[J]. Sensor Review, 2019, 39(2):199-207.
[8]CUI Jiwen, LI Junying, FENG Kunpeng, et al. A 3D Fiber Probe Based on Orthogonal Micro Focal-length Collimation and Fiber Bragg Grating[J]. Measurement Science and Technology, 2016, 27(7):074005.
[9]范光照, 李瑞君. 三坐标测量机微纳探头的设计与验证[J]. 计测技术, 2018, 38(3):60-81.
FAN Guangzhao, LI Ruijun. Design and Verification of Micro/Nano-probes for Coordinate Measuring Machine[J]. Metrology & Measurement Technology, 2018, 38(3):60-81.
[10]蔡春梅. 基于微力测量原理的微纳米测头结构设计及特性研究[D]. 淮南:安徽理工大学, 2013.
CAI Chunmei. Structure Design and Characteristic Study of Micro-nano Probe System Based on Micro-force Measurement Principle[D]. Huainan:Anhui University of Science and Technology, 2013.
[11]刘向阳, 李保坤, 韩迎鸽, 等. 变刚度悬丝支撑微纳测头的结构参数优化与动态特性分析[J]. 科学技术与工程, 2018, 18(25):51-55.
LIU Xiangyang, LI Baokun, HAN Yingge, et al. Structure Parameter Optimization and Dynamic characteristics Analysis of Variable Stiffness Micro-nano Probe with Wire Support Suspension[J]. Science Technology and Engineering, 2018, 18(25):51-55.
[12]WECKENMANN A, ESTLER T, PEGGS G, et al. Probing Systems in Dimensional Metrology[J]. Annals of the CIRP, 2004, 53(2):657-684.
[13]WOZNIAK A, DOBOSZ M. Influence of Measured Objects Parameters on CMM Touch Trigger Probe Accuracy of Probing[J]. Precision Engineering, 2005, 3(13):311-321.
[14]孙立岩. 螺纹综合测量仪的数学模型与数据处理方法研究[D]. 天津:天津大学, 2014.
SUN Liyan. Research on the Mathematical Model of Mahread Synthetical Measuring System and the Method of Data Processing[D]. Tianjin:Tianjin University, 2014.
[15]张白, 石照耀. 三维扫描测头的标定方法[J]. 北京工业大学学报, 2013, 39(4):481-486.
ZHANG Bai, SHI Zhaoyao. Three-dimensional Scanning Probe Calibration Method[J]. Joural of Beijing Universty of Technology, 2013, 39(4):481-486.
[16]万鹏, 郭俊杰, 李海涛, 等. 正交三维扫描测头标定的多区域变参数法研究[J]. 西安交通大学学报, 2012, 46(7):57-62.
WAN Peng, GUO Junjie, LI Haitao, et al. Study on Multiregion Variable Parameters Method for 3D Orthogonal Scanning Probe Calibration[J]. Journal of Xian Jiaotong University, 2012, 46(7):57-62.
[17]WEN Tiexiang, WANG Cheng, ZHANG Yi, et al. A Novel Ultrasound Probe Spatial Calibration Method Using a Combined Phantom and Stylus[J]. Ultrasound in Medicine and Biology, 2020, 46(8):2079-2089.
[18]郑智伟. 光栅式二维扫描测头的研制[D]. 北京:北京工业大学, 2012.
ZHENG Zhiwei. Development of a Grating Two-dimensional Scanning Probe[D]. Beijing:Beijing Industry University, 2012.
[19]FAN K C, CHENG F, PAN W T, et al. Analysis of the Contact Probe Mechanism for Micro-coordinate Measuring Machines[J]. Optoelectronics Instrumentation & Data Processing, 2010, 46(4):340-346.