[1]陈锐. 石墨材料与石墨轴承[J]. 炭素, 2001(4):32-35.
CHEN Rui. Graphite-material and Graphite-bearing[J]. Carbon,2001(4):32-35.
[2]JIA Qian, YUAN Xiaoyang, ZHANG Guoyuan, et al. Dry Friction and Wear Characteristics of Impregnated Graphite in a Corrosive Environment[J]. Chinese Journal of Mechanical Engineering, 2014, 27(5):965-971.
[3]ZHANG Fan, GUAN Yongsheng , YUAN Xiaoyang, et al. Experimental Study on Pad Temperature and Film Thickness of Tilting-pad Journal Bearings with an Elastic-pivot Pad[J]. Tribology International,2015,88:228-235.
[4]陈飞, 金英泽, 袁小阳. 载荷方向对立式转子导轴承润滑性能的影响[J]. 西安交通大学学报, 2019, 53(12):25-30.
CHEN Fei, JIN Yingze, YUAN Xiaoyang. Effect of Load Direction on Lubrication Performance of the Four-pad Water-lubricated Tilting Guide Bearing for Vertical Rotor[J]. Journal of Xian Jiaotong University, 2019, 53(12):25-30.
[5]贾谦, 董光能, 赵伟刚, 等. 腐蚀下浸渍石墨材料的摩擦磨损特性研究[J]. 徐州工程学院学报(自然科学版), 2013, 28(3):21-26.
JIA Qian, DONG Guangneng, ZHAO Weigang, et al. Friction and Wear Characteristics of Impregnated Graphite Materials under Corrosion Environments[J].Journal of Xuzhou Institute of Technology (Natural Science Edition), 2013, 28(3):21-26.
[6]王祥, 张帆, 史朝阳, 等. 多瓦预载荷调整对核主泵轴系临界特性的影响[J]. 轴承, 2018(9):38-44.
WANG Xiang, ZHANG Fan, SHI Zhaoyang, et al. Influence of Multi-pads Preload Adjustment on Critical Properties of Nuclear Main Pump Shafting[J]. Bearing, 2018(9):38-44.
[7]贾谦, 欧阳武, 张帆, 等. 水润滑轴承磨损寿命预测校正试验载荷的磁力模拟研究[J]. 中国电机工程学报, 2014, 34(17):2836-2842.
JIA Qian, OUYANG Wu, ZHANG Fan, et al. Magnetic Simulation Research of Prediction-correction Test Loading for Water-lubricated Bearing Wear Life[J]. Proceedings of the CSEE, 2014, 34(17):2836-2842.
[8]张帆, 欧阳武, 奚延辉, 等. 核主泵水润滑轴承的润滑性能及起飞转速[J]. 机械设计与研究, 2017, 33(5):87-92.
ZHANG Fan, OUYANG Wu, XI Yanhui, et al. Study on the Lubrication Performance and Take-off Speed of the Nuclear Main Pump Water Lubricated Bearing[J]. Machine Design & Research, 2017, 33(5):87-92.
[9]张国渊, 袁小阳, 赵伟刚, 等.螺旋槽端面密封脱开转速的理论及试验[J]. 机械工程学报,2008, 44(8):55-60.
ZHANG Guoyuan, YUAN Xiaoyang, ZHAO Weigang, et al. Theoretical and Experimental Approach of Separation Speed of Spiral Groove Face Seals[J]. Journal of Mechanical Engineering, 2008, 44(8):55-60.
[10]张帆, 金英泽, 王祥, 等. 可倾瓦导轴承液膜力非线性指数模型及应用研究[J]. 西安交通大学学报, 2017, 51(3):72-79.
ZHANG Fan, JIN Yingze, WANG Xiang, et al. Exponential Model of Nonlinear Liquid-film Force of Tilting-pad Guide Bearing and Its Application[J]. Journal of Xian Jiaotong University, 2017, 51(3):72-79.
[11]WANG J L, ZHANG C, WANG Y L, et al. Preparation and Experimental Study of Graphite Material for Water Lubricated Thrust Bearing of Nuclear Main Pump[J]. Materials Science Forum, 2018, 4746:102-106.
[12]张帆. 核电可倾瓦轴承润滑动力学设计与试验研究[D]. 西安:西安交通大学, 2017.
ZHANG Fan. Design and Experimental Study on Lubrication and Dynamics of Tilting-pad Bearings for Nuclear Power Equipment[D]. Xian: Xian Jiaotong University,2017.
[13]周义光, 张昌兵. 可倾瓦水润滑推力轴承中的水膜厚度分析[J]. 水动力学研究与进展(A辑), 1996(6):690-697.
ZHOU Yiguang, ZHANG Changbing. Analysis of Water Film Thickness in Tilting Pad Water Lubricated Thrust Bearing[J]. Chinese Journal of Hydrodynamics (Series A) ,1996(6):690-697.
[14]王山琪. 大型扇形可倾瓦推力轴承最佳支承点位置研究[D]. 哈尔滨:哈尔滨理工大学, 2018.
WANG Shanqi. Research on Optimal Supporting Point Position of Large Sector Tilting Pad Thrust Bearing[D]. Harbin:Harbin University of Science and Technology ,2018.
[15]蔡龙, 王伟光. 核主泵无顶油惰转推力轴承磨损研究[J]. 水泵技术, 2019(1):10-13.
CAI Long, WANG Weiguang. Study on Wear of Oilless Rotary Thrust Bearing of Nuclear Main Pump[J]. Pump Technology, 2019(1):10-13. |