[1]WEGENER K, BLEICHER F, KRAJNIK P, et al. Recent Developments in Grinding Machines[J]. CIRP Annals—Manufacturing Technology, 2017, 66(2): 779-802.
[2]丁文锋, 苗情, 李本凯,等. 面向航空发动机的镍基合金磨削技术研究进展[J]. 机械工程学报, 2019, 55(1):189-215.
DING Wenfeng, MIAO Qing, LI Benkai, et al. Review on Grinding Technology of Nickel-based Superalloys Used for Aero-engine[J]. Journal of Mechanical Engineering. 2019, 55(1):189-215.
[3]ZHANG Y, FANG C, HUANG G, et al. Modeling and Simulation of the Distribution of Undeformed Chip Thicknesses in Surface Grinding[J]. International Journal of Machine Tools and Manufacture, 2018, 127: 14-27.
[4]JIA D, LI C, ZHANG Y, et al. Experimental Research on the Influence of the Jet Parameters of Minimum Quantity Lubrication on the Lubricating Property of Ni-based Alloy Grinding[J]. The International Journal of Advanced Manufacturing Technology, 2016, 82(1): 617-630.
[5]BRINKSMWERIER E, HEINZEL C, WITTMANN M. Friction, Cooling and Lubrication in Grinding[J]. CIRP Annals—Manufacturing Technology, 1999, 48(2): 581-598.
[6]ROWE B W. Temperatures in Grinding-a Review[J]. Journal of Manufacturing Science and Engineering-Transactions of the ASME, 2017, 139(12): 121001.
[7]REDDY P P, GHOSH A. Some Critical Issues in Cryo-grinding by a Vitrified Bonded Alumina Wheel Using Liquid Nitrogen Jet[J]. Journal of Materials Processing Technology, 2016, 229:329-337.
[8]BAGHERZADEH A, BUDAK E. Investigation of Machinability in Turning of Difficult-to-cut Materials Using a New Cryogenic Cooling Approach[J]. Tribology International, 2018, 119:510-520.
[9]ABDUL SANI A S, RAHIM E A, SHARIF S, et al. Machining Performance of Vegetable Oil withPhosphonium- and Ammonium-based Ionic Liquids via MQL Technique[J]. Journal of Cleaner Production, 2019, 209:947-964.
[10]QIAN N, FU Y, ZHANG Y, et al. Experimental Investigation of Thermal Performance of the Oscillating Heat Pipe for the Grinding Wheel[J]. International Journal of Heat and Mass Transfer, 2019, 136: 911-923.
[11]NGUYEN T, ZHANG L C. Performance of a New Segmented Grinding Wheel System[J]. International Journal of Machine Tools and Manufacture, 2009, 49(3): 291-296.
[12]SHI C F, LI X, CHEN Z T. Design and Experimental Study of a Micro-groove Grinding Wheel with Spray Cooling Effect[J]. Chinese Journal of Aeronautics, 2014, 27(2):407-412.
[13]LI X, CHEN Z T, CHEN W Y. Suppression of Surface Burn in Grinding of Titanium Alloy TC4 Using a Self-inhaling Internal Cooling Wheel[J]. Chinese Journal of Aeronautics, 2011, 24(1):96-101.
[14]SASAHARA H, KIKUMA T, KOYASU R, et al. Surface Grinding of Carbon Fiber Reinforced Plastic(CFRP) with an Internal Coolant Supplied through Grinding Wheel[J]. Precision Engineering, 2014, 38(4): 775-782.
[15]彭锐涛, 张珊, 唐新姿,等. 加压内冷却砂轮的研制及磨削性能研究[J]. 机械工程学报, 2017, 53(19): 187-194.
PENG Ruitao, ZHANG Shan, TANG Xinzi, et al. Development and Grinding Performance of a Pressurized Internal Cooling Slotted Grinding Wheel[J]. Journal of Mechanical Engineering, 2017, 53(19): 187-194.
[16]PENG R T, HUANG X F, TANG X Z, et al. Performance of a Pressurized Internal-cooling Slotted Grinding Wheel System[J]. International Journal of Advanced Manufacturing Technology, 2018, 94: 2239-2254.
[17]LI T, WU T, DING X, et al. Design of an Internally Cooled Turning Tool Based on Topology Optimizationand CFD Simulation[J]. International Journal of Advanced Manufacturing Technology, 2016, 91(1/4): 1-11.
[18]DUCHOSAL A, WERDA S, SERRA R, et al. Numerical Modeling and Experimental Measurement of MQL Impingement over an Insert in a Milling Tool with Inner Channels[J]. International Journal of Machine Tools and Manufacture, 2015, 94:37-47.
[19]FALLENSTEIN F, AURICH J C. CFD Based Investigation on Internal Cooling of Twist Drills[J].Procedia CIRP, 2014, 14:293-298. |