[1]WEN X, ZHAO Y, WANG D. Accurate Evaluation of Free-form Surface Profile Error Based on Quasi Particle Swarm Optimization Algorithm and Surface Subdivision[J]. Chinese Journal of Mechanical Engineering, 2013. 26(2):406-413.
[2]王益,赖金涛,傅建中,等. 基于NURBS控制点重构的加工误差在机测量方法[J]. 浙江大学学报(工学版), 2014,48(10):1781-1787.
WANG Yi, LAI Jintao, FU Jianzhong, et al. On-machine Measurement of Machining Error Based on Reconstruction of NURBS Control Points[J]. Journal of Zhejiang University(Engineering Science), 2014, 48(10): 1781- 1787.
[3]YU M, ZHANG Y, LI Y, et al. Adaptive Sampling Method for Inspection Planning on CMM for Free-form Surfaces[J]. The International Journal of Advanced Manufacturing Technology, 2013, 67(9):1967-1975.
[4]郑惠江,何改云,丁伯慧. 离散数据环境下复杂曲面检测点布局策略研究[J]. 机械工程学报, 2011, 47(24): 8-14.
ZHENG Huijiang, HE Gaiyun, DING Baihui. Research on Sampling Points Distribution Strategy for Complex Curved Surfaces in Dispersed Data Environment[J]. Journal of Mechanical Engineering, 2011, 47(24):8-14.
[5]LI Wenlong, WANG Gang, ZHANG Gang, et al. A Novel Path Generation Method of Onsite 5-axis Surface Inspection Using the Dual-cubic NURBS Representation[J]. Measurement Science and Technology, 2016, 27:1-13.
[6]SYED H M, ABDULRAHMAN A-A. Enhance Performance of Inspection Process on Coordinate Measuring Machine[J]. Measurement, 2014, 47:78-91.
[7]高健,黄沛霖,文章,等. 复杂曲面零件加工精度原位检测系统的残余误差补偿[J]. 机械工程学报, 2016, 52(15): 139-146.
GAO Jian, HUANG Peilin, WEN Zhang, et al. Residual Error Compensation of In-situ Inspection System for Precision Machining of Complex Components[J]. Journal of Mechanical Engineering, 2016, 52(15):139-146.
[8]PONIATOWSKA M. Free-form Surface Machining Error Compensation Applying 3D CAD[J]. Computer-Aided Design, 2015, 62:227-235.
[9]陈岳坪,靳龙,卢海燕,等. 空间统计方法在自由曲面加工误差分解中的应用[J]. 北京理工大学学报, 2017, 37(3): 260-266.
CHEN Yueping, JIN Long, LU Haiyan, et al. Application of Spatial Statistical Analysis in Decomposition of Machining Errors for Free-form Surfaces[J]. Transactions of Beijing Institute of Technology, 2017, 37(3):260-266.
[10]何彬彬,郭达志,方涛. 基于空间统计学的空间关联挖掘[J]. 计算机工程,2006,32(5):20-22.
HE Binbin, GUO Dazhi, FANG Tao. Research on Spatial Association Based on Spatial Statistics[J]. Computer Engineering, 2006,32(5):20-22.
[11]潘海燕,肖根如,程朋根,等. 基于空间统计分析与GIS的江西省县域经济的研究[C]∥中国地理信息系统协会理论与方法学术会议论文集. 南京, 2005:96-101.
PAN Haiyan,Xiao Genru,CHENG Penggen,et al. Study on the Counties Economic in Jiangxi Province Based on Spatial Statistical and GIS[C]∥Proceeding of Chinese Association of GIS on Theory and Methodology. Nanjing, 2005: 96-101.
[12]PONIATOWSKA M, WERNER A. Fitting Spatial Models of Geometric Deviations of Free-form Surfaces Determined in Coordinate Measurement[J]. Metrdogy and Measurement Systems, 2010, 17(4): 599-610.
[13]YANG B D, MENQ C H. Compensation for Form Error of End-milled Sculptured Surfaces Using Discrete Measurement Data[J]. International Journal of Machine Tools and Manufacture, 1993, 33(5): 725-740.
[14]UPTON G, FINGLETON B. Spatial Dam Analysis by Example[M]. New York: Wiley, 1985.
[15]YAN Z, YANG B D, MENQ C H. Uncertainty Analysis and Variation Reduction of Three Dimensional Coordinate Metrology. Part 1: Geometric Error Decomposition[J]. International Journal of Machine Tools and Manufacture, 1999, 39(8): 1199-1217.
[16]陈大伟,陈岳坪,杨翊. 复杂曲面的三坐标测量机采样参数选取[J]. 机械设计与制造, 2018(1): 209-211.
CHEN Dawei, CHEN Yueping, YANG Yi. Sampling Parameter Selection of CMM for Complex Surface[J]. Machinery Design and Manufacture, 2018(1): 209-211. |