[1]MURALIKRISHNAN B,PHILLIPS S,SAWYER D.Laser Trackers for Large-scale Dimensional Metrology:a Review[J].Precision Engineering,2016,44:13-28.
[2]ZOU J.Indoor Global Positioning Measurement System Application for the Aircraft Flexible Joint Assembly[J].SAE Technical Paper,2010-01-1857.
[3]PEGGS G N,MAROPOULOS P G,HUGHES E B,et al.Recent Developments in Large-scale Dimensional Metrology[J].Journal of Engineering Manufacture,2009,223(6):571-595.
[4]罗芳,邹方,周万勇.飞机大部件对接中的位姿计算方法[J].航空制造技术,2011 (3):91-94.
LUO Fang,ZOU Fang,ZHOU Wanyong.Posture Calculating Algorithm in Large Aircraft Component Butt[J].Aeronautical Manufacturing Technology,2011(3):91-94.
[5]冯春,吴洪涛,陈柏,等.追踪与目标航天器相对位姿参数四元数的解析算法[J].中国机械工程,2013,24(12):1655-1660.
FENG Chun,WU Hongtao,CHEN Bai,et al.Closed-form Method for Relative Pose Parameters between Chaser and Target Spacecraft Based on Quaternion[J].China Mechanical Engineering,2013,24(12):1655-1660.
[6]TANG W,LI Y,YU J,et al.A Posture Evaluation Method for Aircraft Wing Based on a Simple Measurement System[J].Journal of Engineering Manufacture,2013,227(4):627-630.
[7]金贺荣,刘达,于斌,等.舱段自动装配位姿求解方法研究[J].中国机械工程,2017,28 (1):88-92.
JIN Herong,LIU Da,YU Bin,et al.Study on Posture Solution Method of Automatic Assembly of Cabins[J].China Mechanical Engineering,2017,28 (1):88-92.
[8]朱绪胜,郑联语.基于关键装配特性的大型零部件最佳装配位姿多目标优化算法[J].航空学报,2012,33(9):1726-1736.
ZHU Xusheng,ZHENG Lianyu.Multiple-objective Optimization Algorithm Based on Key Assembly Characteristics to Posture Best Fit for Large Component Assembly[J].Acta Aeronautica et Astronautica Sinica,2012,33(9):1726-1736.
[9]刘继红,庞英仲,邹成.基于关键特征的飞机大部件对接位姿调整技术[J].计算机集成制造系统,2013,19(5):1009-1014.
LIU Jihong,PANG Yingzhong,ZOU Cheng.Adjusting Position-orientation of Large Components Based on Key Features[J].Computer Integrated Manufacturing Systems,2013,19(5):1009-1014.
[10]CHEN Z,DU F,TANG X,et al.A Framework of Measurement Assisted Assembly for Wing-fuselage Alignment Based on Key Measurement Characteristics[J].International Journal of Manufacturing Research,2015,10(2):107-128.
[11]杨飞,刘国军,安其昌.平差理论在大口径光学元件轮廓检测中的应用[J].红外与激光工程,2015,44(10):2965-2969.
YANG Fei,LIU Guojun,AN Qichang.Application of Adjustment Theory in Large Aperture Mirror Surface Profile Metrology[J].Infrared and Laser Engineering,2015,44(10):2965-2969.
[12]朱永国,黄翔,李泷杲,等.飞机装配高精度测量控制网精度分析与构建准则[J].中国机械工程,2014,25(20):2699-2704.
ZHU Yongguo,HUANG Xiang,LI Shuanggao,et al.Precision Analysis and Layout Rules of Surveying Control Network for Aircraft Assembly[J].China Mechanical Engineering,2014,25(20):2699-2704. |