[1]ZHANG Zhichao, XU Yongchao, YUAN Shijian. Reverse Deep Drawability of 5A06 Aluminum Alloy Plate at Elevated Temperatures[J] Transactions of Nonferrous Metals Society of China, 2016, 26(6): 1538-1545.
[2]王辉, 高霖, 陈明和, 等. T6态7075铝合金的温拉深成形研究 [J]. 中国机械工程, 2012, 23(2): 110-113.
WANG Hui, GAO Lin, CHEN Minghe, et al. Deep Drawing of A7075 with T6 Temper at Elevated Temperature[J]. China Mechanical Engineering, 2012, 23(2): 110-113.
[3]FARSHIDI M H, KAZEMINEZHAD M, MIYAMOTO H. Severe Plastic Deformation of 6061 Aluminum Alloy Tube with Pre and Post Heatments[J]. Materials Science and Engineering: A, 2013, 563(7):60-67.
[4]DONG G J, BI J, DU B, et al. Research on AA6061 Tubular Components Prepared by Combined Technology of Heat Treatment and Internal High Pressure Forming[J]. Journal of Materials Processing Technology, 2017, 242: 126-138.
[5]陈晓华, 赵长财, 董国疆, 等. 加载路径对AA5083管件热态非金属颗粒介质成形性能的影响[J]. 中国机械工程, 2016, 27(18): 2547-2555.
CHEN Xiaohua, ZHAO Changcai, DONG Guojiang, et al. Formability of Hot Non-metallic Granule Medium of AA5083 Aluminum Alloy Tube under Various Loading Paths[J]. China Mechanical Engineering, 2016, 27(18): 2547-2555.
[6]DONG Guojiang, ZHAO Changcai,CAO Miaoyan. Process of Back Pressure Deep Drawing with Solid Granule Medium on Sheet Metal[J]. Journal of Central South University, 2014, 21(7): 2617-2626.
[7]ZHANG Feifei, CHEN Jun, CHEN Jieshi, et al. Overview on Constitutive Modeling for Hydroforming with the Existence of Through-thickness Normal Stress[J]. Journal of Materials Processing Technology, 2012, 212(11): 2228-2237.
[8]崔晓磊, 王小松, 苑世剑. 法向应力对板料成形极限影响的研究进展[J]. 塑性工程学报, 2013, 20(2): 1-9.
CUI Xiaolei, WANG Xiaosong, YUAN Shijian. Progress on Effects of Through-thickness Normal Stress on Sheet Metal Forming Limit[J]. Journal of Plasticity Engineering, 2013, 20(2): 1-9.
[9]HASHEMI R, ABRINIA K. Analysis of the Extended Stress-based Forming Limit Curve Considering the Effects of Strain Path and Through-thickness Normal Stress[J]. Materials and Design, 2014, 54(2): 670-677.
[10]ZHANG F, CHEN J, CHEN J. Effect of Through-thickness Normal Stress on Forming Limits under Yld2003 Yield Criterion and M-K Model[J]. International Journal of Mechanical Sciences, 2014, 89: 92-100.
[11]ZHANG F, CHEN J, CHEN J, et al. Forming Limit Model Evaluation for Anisotropic Sheet Metals under Through-thickness Normal Stress[J]. International Journal of Mechanical Sciences, 2014, 89: 40-46.
[12]LANG L, CAI G, LIU K, et al. Investigation on the Effect of through Thickness Normal Stress on Forming Limit at Elevated Temperature by Using Modified M-K Model[J]. International Journal of Material Forming, 2014, 8(2): 1-18.
[13]YANG Xiying, LANG Lihui, LIU Kangning, et al. Modified M-K Model Combined with Ductile Fracture Criterion and Its Application in Warm Hydroforming[J]. Transactions of Nonferrous Metals Society of China, 2015, 25: 3389-3398.
[14]MIRFALAH-NASIRI S M, BASTI A, HASHEMI R. Forming Limit Curves Analysis of Aluminum Alloy Considering the Through-thickness Normal Stress, Anisotropic Yield Functions and Strain Rate[J]. International Journal of Mechanical Sciences, 2016, 117: 93-101.
[15]FANG Gang, LIU Qingjun, LEI Liping, et al. Comparative Analysis between Stress- and Strain-based Forming Limit Diagrams for Aluminum Alloy Sheet 1060[J]. Transactions of Nonferrous Metals Society of China, 2012, 22(S2): 343-349.
[16]陈明和, 高霖, 王辉, 等. 板料成形极限应力图及其应用研究进展[J]. 中国机械工程, 2005, 16(17): 1593-1597.
CHEN Minghe, GAO Lin, WANG Hui, et al. Research Progresses on Sheet Metal Forming Limit Stress Diagram[J]. China Mechanical Engineering, 2005, 16(17): 1593-1597.
[17]杨希英, 郎利辉, 刘康宁, 等. 基于修正M-K模型的铝合金板材成形极限图预测[J]. 北京航空航天大学学报, 2015, 41(4): 675-679.
YANG Xiying, LANG Lihui, LIU Kangning, et al. Prediction of Forming Limit Diagram of AA7075-0 Aluminum Alloy Sheet Based on Modified M-K Model[J].Journal of Beijing University of Aeronautics and Astronautics, 2015, 41(4): 675-679.
[18]PAUL S K. Theoretical Analysis of Strain- and Stress-based Forming Limit Diagrams[J]. Journal of Strain Analysis for Engineering Design, 2013, 48(3): 177-188.
[19]杨卓云, 赵长财, 董国疆, 等. 凸环管件颗粒介质内高压成形工艺理论解析[J]. 中国机械工程, 2017, 28(7): 867-876.
YANG Zhuoyun, ZHAO Changcai, DONG Guojiang, et al. Theoretical Analyses of Tube Granule Medium Internal High Pressure Forming Processes[J]. China Mechanical Engineering, 2017, 28(7): 867-876.
[20]CHEN H, GVNER A, KHALIFA N B, et al. Granular Media-based Tube Press Hardening[J]. Journal of Materials Processing Technology, 2016, 228: 145-159.
[21]DONG G J, YANG Z Y, ZHAO J P, et al. Stress-strain Analysis on AA7075 Cylindrical Parts during Hot Granule Medium Pressure Forming[J]. Journal of Central South University, 2016, 23(11): 2845-2857.
[22]DONG G J, ZHAO C C, YA Y Y, et al. Discrete Element and Finite Element Coupling Simulation and Experiment of Hot Granule Medium Pressure Forming[J]. Transactions of Nonferrous Metals Society of China, 2015, 25(12): 4089-4101.
[23]CHEN H, HESS S, HAEBERLE J, et al. Enhanced Granular Medium-based Tube and Hollow Profile Press Hardening[J]. CIRP Annals—Manufacturing Technology, 2016, 65: 273-276.
[24]ABDELKEFI A, MALECOT P, BOUDEAU N, et al. Evaluation of the Friction Coefficient in Tube Hydroforming with the “Corner Filling Test” in a Square Section Die[J]. International Journal of Advanced Manufacturing Technology, 2016, 88: 2265-2273.
[25]ABDELKEFI A, GUERMAZI N, BOUDEAU N, et al. Effect of the Lubrication between the Tube and the Die on the Corner Filling when Hydroforming of Different Cross-sectional Shapes[J]. International Journal of Advanced Manufacturing Technology, 2016, 87: 1169-1181. |