Optimal Design of Vortex Flow Non-contact Pneumatic Gripper Structures
LI Jianfeng1;LI Guoping1;LU Bo2;LIANG Dongtai1
1.Faculty of Mechanical Engineering and Mechanics, Ningbo University,Ningbo, Zhejiang,315211
2.National Quality Supervision and Inspection Center of Pneumatic Products,Fenghua,Zhejiang,315500
Online:2018-03-10
Published:2018-03-08
Supported by:
National Natural Science Foundation of China (No. 51305214)
[1]徐立芳. 非接触涡流负压搬运器的流场特性及实验研究[D]. 大连:大连海事大学,2010.
XU Lifang. Study on Flow Field and Experiment of Non-contact Vortex Negative Pressure Carrier[D]. Dalian:Dalian Maritime University,2010.
[2]ZHAO Jianghong,LI Xin. Effect of Supply Flow Rate on Performance of Pneumatic Non-contact Gripper Using Vortex Flow[J]. Experimental Thermal and Fluid Science,2016,79:91-100.
[3]郑智剑,路波,江爱青,等. 旋回流气爪流场特征的数值分析[J]. 液压气动与密封,2012,32(7):16-18.
ZHENG Zhijian,LU Bo,JIANG Aiqing,et al. Numerical Analysis on the Flow Characteristics of Vortex Gripper[J]. Hydraulics Pneumatics and Seals,2012,32(7):16-18.
[4]郭丽丽,郑智剑,路波,等. 旋回流非接触式气爪流场及吸附性能的数值分析[J]. 液压与气动,2014(4):7-10.
GUO Lili,ZHENG Zhijian,LU Bo,et al. Numerical Analysis on the Flow Field and Adsorption Performance of Non-contact Vortex Gripper[J]. Chinese Hydraulics and Pneumatics,2014(4):7-10.
[5]徐文鹏,刘利刚. 3D打印中的结构优化问题研究[D].合肥:中国科学技术大学,2016.
XU Wenpeng,LIU Ligang. Research on Structure Optimization in 3D Printing[D]. Hefei:University of Science and Technology of China,2016.
[6]阮晓东,郭丽媛,傅新,等. 旋涡式非接触硅片夹持装置的流动计算及试验研究[J]. 机械工程学报,2010,46(16):189-194.
RUAN Xiaodong,GUO Liyuan,FU Xin,et al. Sinmulation and Experiment Research on Vortex Non-contact Wafer Holder[J]. Journal of Mechanical Engineering,2010,46(16):189-194.
[7]SHOUICHIRO L,KATSUYA H,ERI A,et al. Suppression of Vortex Precession in a Non-contact Handling Device by a Circular Column[J]. Journal of Flow Control,Measurement & Visualization, 2017,4(2):70-78.
[8]郭文思,李乃稳,刘超,等. LES 和 k-ε 湍流模型对斜向淹没射流的数值模拟研究[J]. 水力发电学报, 2017,36(1):7-15.
GUO Wensi,LI Naiwen,LIU Chao,et al. Oblique Submerged Jets in the Pool Using LES and k-ε Turbulence Model[J]. Journal of Hydroelectric Engineering,2016, 36(1):7-15.
[9]郭丽媛. 非接触硅片夹持装置的研究[D]. 杭州:浙江大学,2010.
GUO Liyuan. Research of Non-contact Wafer Holder[D]. Hangzhou:Zhejiang University,2010.
[10]韩占忠,王敬,兰小平. Fluent流体工程仿真计算实例及应用[M]. 北京:北京理工大学出版社,2004:20-21.
HAN Zhanzhong,WANG Jing,LAN Xiaoping. Computational Fluent Fluid Simulation Example Calculation and Engineering Application[M]. Beijing: Beijing Institute of Press,2004:20-21.
[11]SHOUICHIRO L,MASAKO U,LI Xin,et al. Performance of a Non-contact Handling Device Using Swirling Flow with Various Gap Height[J]. The Visualization Society of Japan,2010,13:319-326.
[12]LI Xin,SHOUICHIRO L,KENJI K,et al. Computational Fluid Dynamics Study of a Noncontact Handling Device Using Air-swirling Flow[J]. Journal of Engineering Mechanics,2011,137(6):400-409.
[13]LI Xin,KENJI K,TOSHIHARU K. Analysis of Vortex Levitation[J]. Experimental Thermal and Fluid Science,2008,32:1448-1454.