[1]JIAO Shenbo, GAO Chao, CHENG Li, et al. A Very High-cycle Fatigue Test and Fatigue Properties of TC17 Titanium Alloy[J]. Journal of Materials Engineering and Performance, 2016, 25(3):1085-1093.
[2]王宝林. 钛合金TC17力学性能及其切削加工特性研究[D]. 济南:山东大学,2013.
WANG Baolin. Study on The Mechanical Properties of Titanium Alloy TC17 and Characteristics in Machining[D]. Jinan: Shandong University, 2013.
[3]TAN Liang, ZHANG Dinghua, YAO Changfeng, et al. Evolution and Empirical Modeling of Compressive Residual Stress Profile after Milling, Polishing and Shot Peening for TC17 Alloy[J]. Journal of Manufacturing Processes, 2017, 26:155-165.
[4]NIU Qiulin, AN Qinglong, CHEN Ming, et al. Wear Mechanisms and Performance of Coated Inserts During Face Milling of TC11 and TC17 Alloys [J]. Machining Science and Technology, 2013, 17(3): 483-495.
[5]陈洋,裴传虎,李臻熙,等. α+β钛合金在高应变率下的动态力学性能[J].航空材料学报,2013,33(6):8-12.
CHEN Yang, PEI Chuanhu, LI Zhenxi, et al. Dynamic Mechanical Behavior of α+β Titanium Alloys at High Strain Rate[J]. Journal of Aeronautical Materials, 2013,33(6):8-12.
[6]WANG Baolin, AI Xing, LIU Zhanqiang, et al. Dynamic Behavior of Ti-17 Alloy under High Strain Rates at Elevated Temperatures[J]. Materials at High Temperatures, 2013, 30(2):145-150.
[7]LI Qiang, XU Yongbo, BASSIM M N. Dynamic Mechanical Properties in Relation to Adiabatic Shear Band Formation in Titanium Alloy-Ti17[J]. Materials Science and Engineering A, 2003, 358(1/2):128-133.
[8]WANG Kaixuan, ZENG Weidong, ZHAO Yongq-ing, et al. Hot Working of Ti-17 Ttitanium Alloy with Lamellar Starting Structure Using 3-D Processing Maps[J]. Journal of Materials Science, 2010, 45(21):5883-5891.
[9]于冰冰, 陈志勇,赵子博,等. TC17钛合金电子束焊接接头的显微组织与力学性能研究[J]. 金属学报,2016,52(7):831-841.
YU Bingbing, CHEN Zhiyong, ZHAO Zibo, et al. Microstructure and Mechanical Properties of Electron Beam Weldment of Titanium Alloy TC17[J]. Acta Metallurgica Sinica, 2016, 52(7):831-841.
[10]黄伯云,李成功,石力开,等. 中国材料工程大典第4卷有色金属材料工程(上)[M]. 北京: 化学工业出版社,2006.
HUANG Boyun, LI Chenggong, SHI Likai, et al. China Materials Engineering Canon: Nonferrous Metal Materials Engineering (Part I)[M]. Beijing: Chemical Industry Press, 2006.
[11]ZHAN Hongyi, KENT D, WANG Gui, et al. The Dynamic Response of a β Ttitanium Alloy to High Strain Rates and Elevated Temperatures[J]. Materials Science and Engineering A,2014,607:417-426.
[12]张红,索涛,李玉龙. 不锈钢材料高温、高应变率下动态力学性能的试验研究[J].航空材料学报,2012,32(1):78-83.
ZHANG Hong, SUO Tao, LI Yulong. Mechanical Behavior of a Stainless Steel Material at Elevated Temperatures and High Strain Rates[J]. Journal of Aeronautical Materials, 2012,32(1):78-83.
[13]GUO Weiguo, TIAN Hongwei. Strain Rate Sensitivity and Constitutive Models of Several Typical Aluminum Alloys[J]. The Chinese Journal of Nonferrous Metals, 2009,19(1):56-61. |