[1]YU Jia, CAI Zhenbing, ZHU Minhao, et al. Study on Torsional Fretting Behavior of UHMWPE [J]. Applied Surface Science, 2008, 255(2): 616-618.
[2]蔡振兵. 扭动微动磨损机理研究[D].成都:西南交通大学,2009.
CAI Zhenbing. Research on Torsional Fretting Wear [D]. Chengdu: Southwest Jiaotong University,2009.
[3]ZHANG H, BROWN L, BLUNT L, et al. The Contribution of the Micropores in Bone Cement Surface to Generation of Femoral Stem Wear in Total Hip Replacement[J]. Tribology International, 2011, 44(11):1476-1482.
[4]俞树荣, 王洁璐, 李淑欣,等. Ti-6Al-4V 燕尾榫结构微动疲劳裂纹萌生及扩展行为研究[J]. 中国机械工程, 2015, 26(24):3386-3390.
YU Shurong, WANG Jielu, LI Shuxin, et al. Study on the Initiation and Propagation of Fretting Fatigue Crack on the Ti-6Al-4V Alloy Dovetail Joint[J]. China Mechanical Engineering, 2015, 26(24): 3386-3390.
[5]CAI Zhenbing, ZHU Minhao, ZHOU Yan. An Experimental Study Torsional Fretting Behaviors of LZ50 Steel [J]. Tribology International, 2010, 43(1): 361-369.
[6]李红岩, 刘捍卫, 周仲荣. 1045钢在部分滑移区和滑移区内的高温微动磨损性能研究[J]. 中国机械工程, 2003, 14(11):985-987.
LI Hongyan, LIU Hanwei, ZHOU Zhongrong. High Temperature Fretting Wear Behaviour of 1045 Steel in the Partial Slip Regime and Slip Regime [J]. China Mechanical Engineering, 2003, 14(11):985-987.
[7]CAI Zhenbing, ZHANG Guang'an, ZHU Yongkui, et al. Torsional Fretting Wear of a Biomedical Ti6Al7Nb Alloy for Nitrogen Ion Implantation in Bovine Serum[J]. Tribology International, 2013, 59: 312-320.
[8]王思明,许明恒. 风力发电机转盘轴承微动磨损的实验研究[J]. 中国机械工程,2010,21(20):2430-2433.
WANG Siming, XU Mingheng. Research on Fretting Wear of Wind Turbine Slewing Bearings[J]. China Mechanical Engineering, 2010,21(20):2430-2433.
[9]阳荣, 蔡振兵, 林映武,等. 690合金管在室温干态下的冲击微动磨损特性研究[J]. 摩擦学学报, 2015, 35(5):525-530.
YANG Rong, CAI Zhenbing, LIN Yingwu, et al. Investigation on Impact Fretting Wear Behavior of Alloy 690 Tube at Dry and Room Temperature [J]. Tribology, 2015, 35(5):525-530.
[10]WANG Song, WANG Fei, LIAO Zhenhua. Study on Torsional Fretting Wear Behavior of a Ball-on-socket Contact Configuration Simulating an Artificial Cervical Disk[J]. Materials Science and Engineering C, 2015, 55: 22-33.
[11]ROYHMAN D, PATEL M, RUNA M J, et al. Fretting-corrosion Behavior in Hip Implant Modular Junctions: the Influence of Friction Energy and pH Variation [J]. Journal of the Mechanical Behavior of Biomedical Materials, 2016,62(5): 570-587.
[12]WANG Shibo, NIU Chengchao. Torsional Tribological Behavior and Torsional Friction Model of Polytetrafluoroethylene against 1045 Steel[J]. PloS One, 2016, 11(1): e0147598.
[13]LAN P, MEYER J L, VAEZIAN B, et al. Advanced Polymeric Coatings for Tilting Pad Bearings with Application in the Oil and Gas Industry[J]. Wear,2016,354:10-20.
[14]ZHANG Po, LU Wenlong, LIU Xiaojun, et al. Torsional Fretting Wear Behavior of CuNiAl against 42CrMo4 under Flat on Flat Contact[J]. Wear,2017,380:6-14.
[15]LAN P X, POLYCHRONOPOULOU K, ZHANG Y, et al. Three-body Abrasive Wear by (silica) Sand of Advanced Polymeric Coatings for Tilting Pad Bearings[J]. Wear,2017,382/383:40-50.
[16]LU W L, ZHANG P, LIU X J, et al. Influence of Surface Topography on Torsional Fretting Wear under Flat-on-flat Contact[J]. Tribology International,2017,109:367-372.
[17]LAN P, MEYER J L, ECONOMY J, et al. Unlubricated Tribological Performance of Aromatic Thermosetting Polyester (ATSP) Coatings under Different Temperature Conditions[J]. Tribology Letters,2016,61(1):1-14.
[18]LU Wenlong, ZHAI Wenzheng, ZHANG Po, et al. Effect of Different Levels of Free Water in Oil on the Fretting Wear of Nickel-aluminum Bronze Based Composites[J]. Wear, 2017,390/391:376-384.
[19]GODJEVAC M. Wear and Friction in a Controllable Pitch Propeller[D]. Delft: Delft University of Technology, 2010.
[20]LEONARDB D. An Experimental and Numerical Investigation of the Effect of Coatings and the Third Body on Fretting Wear [D]. West Lafayette: Purdue University, 2012.
[21]周仲荣. 关于微动磨损与微动疲劳的研究[J]. 中国机械工程,2000,11(10):75-79.
ZHOU Zhongrong. On Fretting Wear and Fretting Fatigue[J]. China Mechanical Engineering, 2000,11(10):75-79. |