[1]吴小峰,干为民,刘春节,等.液压换向滑阀内部结构的健壮性设计[J].中国机械工程,2015,26(15):2030-2040.
WU Xiaofeng, GAN Weimin, LIU Chunjie, et al. Robust Design of Hydraulic Slide Valve Internal Structure[J]. China Mechanical Engineering, 2015,26(15):2030-2040.
[2]王安麟,吴小锋,周成林,等.基于CFD的液压滑阀多学科优化设计[J].上海交通大学学报,2010,44(12):1767-1772.
WANG Anlin, WU Xiaofeng, ZHOU Chenglin, et al. Multidisciplinary Optimization of a Hydraulic Slide Valve Based on CFD[J]. Journal of Shanghai Jiaotong University, 2010, 44(12): 1767-1772.
[3]朱钰.液控换向阀内流场及动态特性的数值模拟[J].哈尔滨工业大学学报,2012,44(5):134-139.
ZHU Yu. Numerical Simulation of Flow Field and Dynamic Characteristics of Pilot Operated Directional Valve[J]. Journal of Harbin Institute of Technology, 2012,44(5):134-139.
[4]付文智,李明哲,蔡中义,等.滑阀式换向阀三维流体速度场的数值模拟[J].哈尔滨工业大学学报,2007,39(1):149-152.
FU Wenzhi, LI Mingzhe, CAI Zhongyi, et al. Numerical Simulation on 3D Fluid Velocity Field in Spool Valve[J]. Journal of Harbin Institute of Technology, 2007, 39(1): 149-152.
[5]赵蕾,陈青,权龙.阀芯运动状态滑阀内部流场的可视化分析[J].农业机械学报,2008,39(11):340-343.
ZHAO Lei,CHEN Qing, QUAN Long. Visualization Analysis of the Flow Field in a Moving Spool Valve[J]. Transactions of the Chinese Society for Agricultural Machinery, 2008, 39(11): 340-343.
[6]AMIRANTE R, VESCOVO G D, LIPPOLIS A. Flow Forces Analysis of an Open Center Hydraulic Directional Control Valve Sliding Spool[J]. Energy Conversion and Management, 2006,47:114-131.
[7]AMIRANTE R, MOSCATELLI P G, CATALANO L A. Evaluation of the Flow Forces on a Direct Proportional Valve by Means of a Computational Fluid Dynamic Analysis[J]. Energy Conversion and Management, 2007,48:942-953.
[8]AMIRANTE R, VESCOVO G D, LIPPOLIS A. Evaluation of the Flow Forces on an Open Centre Directional Control Valve by Means of a Computational Fluid Dynamic Analysis [J].Energy Conversion and Management,2006,47(13): 1748-1760.
[9]PALAU-SALVADOR G. Three-dimensional Modeling and Geometrical Influence on the Hydraulic Performance of a Control Valve[J]. Journal of Fluids Engineering, 2008,130(1):151-163.
[10]侯国祥.流体力学[M].北京:机械工业出版社,2015:170-172.
HOU Guoxiang. Hydromechanics[M]. Beijing: China Machine Press, 2015:170-172.
[11]路甬祥.液压气动技术手册[M].北京:机械工业出版社,2001:25.
LU Yongxiang. Hydraulic and Pneumatic Technology Manual[M]. Beijing: China Machine Press, 2001:25.
[12]罗艳蕾,吴健兴,陈伦军,等.基于CFD的液压滑阀阀芯均压槽的研究[J].液压气动与密封,2013,33(1):13-15.
LUO Yanlei, WU Jianxing, CHEN Lunjun, et al. The Research of the Pressure-equalizing Groove for Hydraulic Slide Valve Based on CFD[J]. Hydraulics Pneumatics & Seal, 2013,33(1):13-15.
[13]童成伟,阮健,孔晨菁,等.2D电液转阀式换向阀阀芯卡紧力分析[J].液压气动与密封,2016,36(4):5-8.
TONG Chengwei, RUAN Jian, KONG Chenjing, et al. Analysis of the Clamping Force for 2D Electro-Hydraulic Rotary Valve[J]. Hydraulics Pneumatics & Seal, 2016,36(4):5-8.
[14]刘国文,阮健,李胜,等.2D电液比例换向阀阀芯卡紧力分析[J].中国机械工程,2015,26(15):1995-1999.
LIU Guowen, RUAN Jian, LI Sheng, et al. Analysis of Spool Clipping Force for 2D Electro-Hydraulic Proportional Directional Valve[J].China Mechanical Engineering, 2015,26(15):1995-1999. |