Previous Articles Next Articles
SONG Baojiang1,2;YAN Shaoze1,2
Online:
2017-07-10
Published:
2017-07-10
Supported by:
宋保江1,2;阎绍泽1,2
基金资助:
CLC Number:
SONG Baojiang1,2;YAN Shaoze1,2 . Research Progresses on Interfacial Stick-slip Frictions[J]. China Mechanical Engineering.
宋保江1,2;阎绍泽1,2. 界面黏滑摩擦现象的研究进展[J]. 中国机械工程.
[1]李伟达, 李娟, 胡海燕, 等. 一种基于黏滑运动原理的微小型机器人建模与实验[J]. 机器人,2012,34(2):182-189. LI Weida, LI Juan, HU Haiyan, et al. Modeling and Experiment of a Micro Robot Based on Stick-slip Motion Principle[J]. Robot,2012,34(2):182-189. [2]钟博文, 王振华, 陈立国, 等. 基于黏滑驱动跨尺度精密定位技术的研究现状[J]. 压电与声光,2011,33(3):479-485. ZHONG Bowen, WANG Zhenhua, CHEN Liguo, et al. Current Development of Trans-scale Precision Positioning Technology Based on the Stick-slip Effect[J]. Piezoelectrics & Acoustooptics,2011,33(3):479-485. [3]KO P L, BROCKLEY C A. The Measurement of Friction and Friction-induced Vibration[J]. Journal of Tribology,1970,92(4):543-549. [4]KATO S, YAMAGUCHI K, MATSUBAYASHI T. Stick-slip Motion of Machine Tool Slideway[J]. Journal of Manufacturing Science and Engineering,1974,96(2):557-566. [5]RABINOWICZ E. The Intrinsic Variables Affecting the Stick-slip Process[J]. Proceedings of the Physical Society,1958,71(4):668-675. [6]RABINOWICZ E. The Nature of the Static and Kinetic Coefficients of Friction[J]. Journal of Applied Physics,1951,22(11):1373-1379. [7]RABINOWICZ E. Autocorrelation Analysis of the Sliding Process[J]. Journal of Applied Physics,1956,27(2):131-135. [8]RABINOWICZ E. Stick and Slip[J]. Scientific American,1956,194:109-119. [9]ARMSTRONG-HELOUVRY B. Control of Machines with Friction[M]. Amsterdam: Kluwer Academic Pub.,1991:24-26. [10]ARMSTRONG-HELOUVRY B. Stick-slip Arising from Stribeck Friction[C]//Robotics and Automation, IEEE International Conference on. Cincinna-ti: IEEE,1990:1377-1382. [11]JOHANNES V I, GREEN M A, BROCKLEY C A. The Role of the Rate of Application of the Tangential Force in Determining the Static Friction Coefficient[J]. Wear,1973,24(3):381-385. [12]BELL R, BURDEKIN M.A Study of the Stick-slip Motion of Machine Tool Feed Drives[J]. Proceedings of the Institution of Mechanical Engineers,1969,184(1):543-560. [13]HESS D P, SOOM A. Friction at a Lubricated Line Contact Operating at Oscillating Sliding Velocities[J]. Journal of Tribology, 1990,112(1):147-152. [14]MATE C M, MCCLELLAND G M, ERLANDSSON R, et al. Atomic-scale Friction of a Tungsten Tip on a Graphite Surface[J]. Physical Review Letters,1987,59(17):1942. [15]GERMANN G J, COHEN S R, NEUBAUER G, et al. Atomic Scale Friction of a Diamond Tip on Diamond (100) and (111) Surfaces[J]. Journal of Applied Physics,1993,73(1):163-167. [16]TAKANO H, FUJIHIRA M. Study of Molecular Scale Friction on Stearic Acid Crystals by Friction Force Microscopy[J]. Journal of Vacuum Science & Technology B,1996,14(2):1272-1275. [17]CARPICK R W, SALMERON M. Scratching the Surface: Fundamental Investigations of Tribology with Atomic Force Microscopy[J]. Chemical Reviews,1997,97(4):1163-1194. [18]温诗铸, 黄平. 摩擦学原理[M]. 北京: 清华大学出版社,2002:412-441. WEN Shizhu, HUANG Ping. Principles of Tribology[M]. Beijing: Tsinghua University Press,2002:412-441. [19]SHIMIZU J, EDA H, YORITSUNE M, et al. Molecular Dynamics Simulation of Friction on the Atomic Scale[J]. Nanotechnology,1998,9(2):118-125. [20]LI Q, DONG Y, PEREZ D, et al. Speed Dependence of Atomic Stick-slip Friction in Optimally Matched Experiments and Molecular Dynamics Simulations[J]. Physical Review Letters, 2011,106(12):126101. [21]LI Y M, DU S R, YUN Y. Nanomanipulation Based on AFM: Probe Cantilever and Interactive Forces Modeling[C]// Asia-pacific Conference on Transducers and Micro-nano Technology(APCO-T08). Taibei, 2008:42-45. [22]TANG H, LI Y, ZHAO X. Hysteresis Modeling and Inverse Feedforward Control of an AFM Piezoelectric Scanner Based on Nano Images[C]//2011 IEEE International Conference on Mechatronics and Automation. Beijing, 2011:189-194. [23]KRIM J, SOLINA D H, CHIARELLO R. Nanotribology of a Krmonolayer: a Quartz-crystal Microbalance Study of Atomic-scale Friction[J]. Physical Review Letters, 1991,66(2):181-184. [24]KRIM J. Friction at the Atomic Scale[J]. Scientific American, 1996,275(4):74-80. [25]HIRANO M, SHINJO K, KANEKO R, et al. Observation of Superlubricity by Scanning Tunneling Microscopy[J]. Physical Review Letters, 1997,78(8):1448. [26]DIENWIEBEL M, VERHOEVEN G S, PRAD-EEP N, et al. Superlubricity of Graphite[J]. Physical Review Letters, 2004,92(12):126101. [27]SOCOLIUC A, BENNEWITZ R, GNECCO E, et al. Transition from Stick-slip to Continuous Sliding in Atomic Friction: Entering a New Regime of Ultralow Friction[J]. Physical Review Letters, 2004,92(13):134301. [28]ERLANDSSON R, HADZIIOANNOU G, MATE C M, et al. Atomic Scale Friction between the Muscovite Mica Cleavage Plane and a Tungsten Tip[J]. The Journal of Chemical Physics, 1988,89(8):5190-5193. [29]BHUSHAN B, KULKARNI A V. Effect of Normal Load on Microscale Friction Measurements[J]. Thin Solid Films, 1996,278(1):49-56. [30]BISTAC S, SCHMITT M, GHORBAL A, et al. Nano-scale Friction of Polystyrene in Air and in Vacuum[J]. Polymer, 2008,49(17):3780-3784. [31]GAO J, LUEDTKE W D, GOURDON D, et al. Frictional Forces and Amontons' Law: from the Molecular to the Macroscopic Scale[J]. The Journal of Physical Chemistry B, 2004,108(11):3410-3425. [32]HARRISON J A, WHITE C T, COLTONR J, et al. Molecular-dynamics Simulations of Atomic-scale Friction of Diamond Surfaces[J]. Physical Review B, 1992,46(15):9700. [33]ZHAO X, HAMILTON M, SAWYER W G, et al. Thermally Activated Friction[J]. Tribology Letters,2007,27(1):113-117. [34]JANSEN L, HOLSCHER H, FUCHS H, et al. Temperature Dependence of Atomic-scale Stick-slip Friction[J]. Physical Review Letters,2010,104(25):256101. [35]ISRAELACHVILI J N, MCGUIGGAN P M, HOMOLA A M. Dynamic Properties of Molecularly Thin Liquid Films[J]. Science, 1988,240(4849):189-191. [36]HOM R G, ISRAELACHVILI J N. Direct Measurement of Structural Forces between Two Surfaces in a Nonpolar Liquid[J]. The Journal of Chemical Physics,1981,75(3):1400-1411. [37]YOSHIZAWA H, ISRAELACHVILI J. Fundamental Mechanisms of Interfacial Friction. 2. Stick-slip Friction of Spherical and Chain Molecules[J]. The Journal of Physical Chemistry,1993,97(43):11300-11313. [38]THOMPSON P A, ROBBINS M O. Origin of Stick-slip Motion in Boundary Lubrication[J]. Science,1990,250(4982):792-794. [39]温诗铸. 纳米摩擦学[M]. 北京: 清华大学出版社,1998. WEN Shizhu. Nano Tribology[M]. Beijing: Tsinghua University Press,1998. [40]雒建斌, 张朝辉, 温诗铸. 薄膜润滑研究的回顾与展望[J]. 中国工程科学,2003,5(7):84-89. LUO Jianbin, ZHANG Chaohui, WEN Shizhu. Retrospectand Prospect of Study on Thin Film Lubrication[J]. Engineering Sciences,2003,5(7):84-89. [41]RABINOWICZ E, TANNER R I. Friction and Wear of Materials[J]. Journal of Applied Mechanics,1995,33(2):606-611. [42]BERMAN A D, DUCKER W A, ISRAELACHVILI J N. Origin and Characterization of Different Stick-slip Friction Mechanisms[J]. Langmuir,1996,12(19):4559-4563. [43]MATE C M, MCCLELLAND G M, ERLANDSSON R, et al. Atomic-scale Friction of a Tungsten Tip on a Graphite Surface[M]// Springer Netherlands: Scanning Tunneling Microscopy,1993:226-229. [44]DIETERICH J H. Time-dependent Friction and the Mechanics of Stick-slip[J]. Pure and Applied Geophysics,1978,116(4/5):790-806. [45]YOSHIZAWA H, CHEN Y L, ISRAELACHVILI J. Fundamental Mechanisms of Interfacial Friction 1 Relation between Adhesion and Friction[J]. The Journal of Physical Chemistry,1993,97(16):4128-4140. [46]HEYMANN F, RABINOWICZ E, RIGHTMIRE B G. Friction Apparatus for Very Low-speed Sliding Studies[J]. Review of Scientific Instruments,1955,26(1):56-58. [47]DAHL P R. A Solid Friction Model[R]. EI Segundo: Aerospace Corp. Ca.,1968. [48]DAHL P R. Solid Friction Damping of Spacecraft Oscillations[R]. EI Segundo: Aerospace Corp. EI Segundo Calif. Guidance and Control Div.,1975. [49]DAHL P R. Solid Friction Damping of Mechanical Vibrations[J]. AIAA Journal,1976,14(12):1675-1682. [50]HESLOT F, BAUMBERGER T, PERRIN B,et al. Creep, Stick-slip, and Dry-friction Dynamics: Experiments and a Heuristic Model[J]. Physical Review E,1994,49(6):4973. [51]NASUNO S, KUDROLLI A, BAK A, et al. Time-resolved Studies of Stick-slip Friction in Sheared Granular Layers[J]. Physical Review E,1998,58(2):2161. [52]YANG Z, ZHANG H P, MARDER M. Dynamics of Static Friction between Steel and Silicon[J]. Proceedings of the National Academy of Sciences,2008,105(36):13264-13268. [53]EGUCHI M, SHIBAMIVA T, YAMAMOTO T. Measurement of Real Contact Area and Analysis of Stick/Slip Region[J]. Tribology International,2009,42(11):1781-1791. [54]TUONOEN A J. Digital Image Correlation to Analyse Stick-slip Behaviour of Tyre Tread Block[J]. Tribology International,2014,69:70-76. [55]SONG BaoJiang, YAN Shaoze, XIANG Wuweikai. A Measurement Method for Distinguishing the Real Contact Area of Rough Surfaces of Transparent Solids Using Improved Otsu Technique[J]. Chinese Physics B,2015,24(1):014601. [56]ZHAO Jieliang, YAN Shaoze, WU Jianing. Analysis of Parameter Sensitivity of Space Manipulator with Harmonic Drive Based on the Revised Response Surface Method[J]. Acta Astronautica,2014,98:86-96. [57]YANG Tianfu, YAN Shaoze, HAN Z. Nonlinear Model of Space Manipulator Joint Considering Time-variant Stiffness and Backlash[J]. Journal of Sound and Vibration,2015,341:246-259. [58]KATO S, SATO N, MATSUBAYASHI T. Some Considerations on Characteristics of Static Friction of Machine Tool Slideway[J]. Journal of Tribology,1972,94(3):234-247. [59]KATO S, MATSUBAYASHI T. On the Dynamic Behavior of Machine Tool Slideway: 1st Report, Characteristics of Static Friction in “Stick Slip” Motion[J]. Bulletin of JSME,1970,13(55):170-179. [60]YOON S W, SHIN M W, LEE W G, et al. Effect of Surface Contact Conditions on the Stick-slip Behavior of Brake Friction Material[J]. Wear,2012,294:305-312. [61]BERGANDER A, BREGUET J M, SCHMITT C, et al. Micropositioners for Microscopy Applications Based on the Stick-slip Effect[C]// International Symposium on Micromechatronics and Human Science. Nagoya, 2000:213-216. [62]BRACE W F, BYERLEE J D.Stick-slip as a Mechanism for Earthquakes[J]. Science,1966,153(3739):990-992. [63]BYERLEE J D.Theory of Friction Based on Brittle Fracture[J]. Journal of Applied Physics,1967,38(7):2928-2934. [64]BYERLEE J. Friction of Rocks[J]. Pure and Applied Geophysics,1978,116(4/5):615-626. [65]DIETERICH J H. Constitutive Properties of Faults with Simulated Gouge. Mechanical Behavior of Crustal Rocks: the Handin Volume[M]. Washington D C:American Geophysical Union,1981:103-120. [66]STESKY R M. Rock Friction-effect of Confining Pressure, Temperature, and Pore Pressure[J]. Pure and Applied Geophysics,1978,116(4/5):690-704. [67]BEN-DAVID O, COHEN G, FINEBERG J. The Dynamics of the Onset of Frictional Slip[J]. Science,2010,330(6001):211-214. [68]BEN-DAVID O, RUBINSTEIN S M, FINEBERG J. Slip-stick and the Evolution of Frictional Strength[J]. Nature,2010,463(7277):76-79. [69]李普春, 刘力强, 郭玲莉, 等. 黏滑过程中的多点错动[J]. 地震地质,2013,35(1):125-137. LI Puchun, LIU Liqiang, GUO Lingli, et al. Multi-point Dislocation in Stick-Slip Process[J]. Seismology and Geology,2013,35(1):125-137. [70]KENDRICK J E, LAVALLEE Y, HIROSE T, et al. Volcanic Drumbeat Seismicity Caused by Stick-slip Motion and Magmatic Frictional Melting[J]. Nature Geoscience,2014,7(6):438-442. |
[1] |
TAO Yun-Ping, WANG Zhi-Yuan.
Energy Dissipation of Bolt Joint under Cycle Load and Parameter Identification of Interfaces
[J]. J4, 201016, 21(16): 1941-1943,1951.
|
[2] | LU Jianfeng, HAN Tiaojuan, YU Yaoping. Collaboration of Cloud Manufacturing Service Based on Service Choreography [J]. China Mechanical Engineering, 2021, 32(07): 849-859. |
[3] | ZHUANG Yuan1;KONG Ning2;REN Jie2;LIU Yuqiang1;WANG Yaobing1;ZHANG Jie2;WANG Wenlong1;MA Shuai2. Review of Docking Interface Technology for Orbital Replacement Units [J]. China Mechanical Engineering, 2020, 31(16): 1917-1930. |
[4] | CHANG Keke, WANG Liping, XUE Qunji. Progresses of Damage and Protection for Surfaces and Interfaces in Machinery under Extreme Operating Conditions [J]. China Mechanical Engineering, 2020, 31(02): 206-220. |
[5] | NI Jing1,2;SHI Yu1,2;MENG Zhen1,2;HUANG Haofeng1. Interface Adhesion Characteristics of Sealing Ring on Single Loop Protective Valves [J]. China Mechanical Engineering, 2019, 30(24): 2899-2905. |
[6] | FANG Jinxiang1;WANG Yujiang2;DONG Shiyun2;XU Binshi2;YAN Shixing2;SONG Chaoqun2,3;SHU Fengyuan3;HE Peng3. Microstructure and Mechanics Properties of Interfaces between Laser Cladded Inconel718 Coating and Substrate [J]. China Mechanical Engineering, 2019, 30(17): 2108-2113. |
[7] | JI Ce1,2;HUANG Huagui1,2;SUN Jingna1,2;LIU Wenwen1,2. Research Progresses on Cast-rolling Bonding Technology of Laminated Metal Clad Strips [J]. China Mechanical Engineering, 2019, 30(15): 1873-1881. |
[8] | LI Cui 1;ZHOU Dan1;MENG Xiaoming2;YE Bing1;WANG Aihua1,3. Research on Laser Beam Wobble Lap Welding Processes of Stainless Steel Sheets [J]. China Mechanical Engineering, 2019, 30(11): 1359-1366,1377. |
[9] | LU Zhufeng1,2;ZHANG Xiaodong1,2;LI Rui1,2;GUO Jin1. A Brain Control Method for Prosthesises Based on Facial Expression [J]. China Mechanical Engineering, 2018, 29(12): 1454-1459,1474. |
[10] | LI Yanwei;WANG Xiaogang;LI Yugui;HAN Peisheng. Hot Rolling Clad Symmetrical Billet for Producing High-chromiun Cast Iron/Low-carbon Steel Wear Resistant Composite Boards [J]. China Mechanical Engineering, 2018, 29(11): 1364-1368,1374. |
[11] | REN Peng;WANG Lihua;WANG Chunfeng. Experimental Study on Normal Dynamic Contact Stiffnesses of Trail Interfaces under Lubrications [J]. China Mechanical Engineering, 2018, 29(07): 811-816. |
[12] | SUN Jianliang1;PENG Yan1;GU Shangwu2;DU Xingming1. Effects of Interface Characteristics on Compound Effectivenesses of Ultra Heavy Plate Clad Rolling [J]. China Mechanical Engineering, 2017, 28(20): 2508-2513. |
[13] | WANG Yao, XIANG Dan, MENG Wenjun, . Simulation and Experiments of Binding Strength of Different Binding Interfaces on ZChSnSb11-6/20 Steel Composites [J]. China Mechanical Engineering, 2017, 28(01): 101-106,112. |
[14] | Wei Wei, Yu Jianwei, Wang Lifei, Gao Genghu, Yu Xiaofen. Research on Wideband Emissivity of End-face Sliding Friction Pair Interfaces [J]. China Mechanical Engineering, 2016, 27(17): 2298-2303. |
[15] | Wang Jiale. Free-hand Sketch Query Interface for Retrieving Mechanical Parts Using Normal Vector Distribution Feature [J]. China Mechanical Engineering, 2016, 27(16): 2136-2140. |
Viewed | ||||||
Full text |
|
|||||
Abstract |
|
|||||