[1]庞剑,谌刚.汽车噪声与振动:理论与应用[M].北京:北京理工大学出版社,2006.
[2]张修路, 姚国凤, 韩春杨, 等.汽车排气系统的悬挂点对减振效果的仿真分析[J].系统仿真学报,2014,26(4): 796-801.
Zhang Xiulu,Yao Guofeng,Han Chunyang,et al.Car Exhaust System of Hanger Point Simulation Analysis of the Vibration Reduction Effect[J].Journal of System Simulation,2014,26(4):796-801.
[3]刘名,翁建生.排气系统振动分析和悬挂点位置优化[J]. 噪声与振动控制,2010,30(5):95-97.
Liu Ming, Weng Jiansheng. Exhaust System Vibration Analysis and the Hanger Point Position Optimization [J].Journal of Noise and Vibration Control,2010, 30(5):95-97.
[4]雷刚,胡鹏,刘圣坤.汽车排气系统模态分析及挂钩位置优化[J].内燃机工程,2014,35(2):102-106.
Lei Gang,Hu Peng,Liu Shengkun.Automotive Exhaust System Modal Analysis and Hanger Position Optimization[J].Journal of Internal Combustion Engine Engineering, 2014, 35(2):102-106.
[5]Pang J,Kurrle P,Qatu M,et al.Attribute Analysis and Criteria for Automotive Exhaust Systems[J].SAE Technical Paper, 2003-01-0221.
[6]Iyer G, Mohan S, Rao N, et al.Evaluation of Dynamic Characteristics of an Automotive Exhaust System Using Operational Modal Analysis (OMA) and Experimental Modal Analysis (EMA)[J].SAE Technical Paper, 2013-01-2903.
[7]刘志恩,田静,颜伏伍,等.汽车排气系统悬挂点布置研究[J].武汉理工大学学报(信息与管理工程版),2010,32(6): 950-953.
Liu Zhien, Tian Jing, Yan Fuwu, et al. Automotive Exhaust System Hanger Point Arrangement Study[J].Journal of Wuhan University of Science and Technology(Information and Management Engineering)2010,32(6):950-953.
[8]Pang J, Qatu M.Exhaust System Robustness Analysis due to Flex Decoupler Stiffness Variation[J].SAE Technical Paper, 2003-01-1649.
[9]黄泽好,郑风云,姜广志,等.基于波纹管简化模型的排气系统模态分析[J].工程设计学报,2015,22(1):54-57.
Huang Zehao,Zheng Fengyun,Jiang Guangzhi,et al. Simplified Model Based on the Corrugated Pipe of Exhaust System Modal Analysis[J].Journal of Engineering Design,2015,22(1):54-57.
[10]Lee C M,Park S T,Kim S H.Development of a Simple Numerical Method of the Exhaust System to Find Optimized Design Values[J].SAE Technical Paper, 1999-01-1666.
[11]Goktan A G, Yetkin A.A Mathematical Model for Exhaust System Vibrations Caused by Road Surface Inputs[J].SAE Technical Paper, 2001-01-1006.
|