[1]于长波,王建军,李楚林,等. 多层U形波纹管的疲劳寿命有限元分析[J]. 压力容器,2008,25(2):23-27.
Yu Changbo,Wang Jianjun,Li Chulin, et al. Finite Element Analysis to Multilayer U-shaped Bellows' Fatigue Life[J].Pressure Vessel Technology, 2008,25(2):23-27.
[2]Wall J E, Englund T L, Ahlin K A, et al. Influence of a Bellows-type Flexible Joint on Exhaust System Dynamics[J]. Journal of Automobile Engineering,2004,218:1473-1478.
[3]李杰,段玖. 多层波纹管接触分析及稳定性屈曲分析[J]. 材料开发与应用,2011,26(6):53-57.
Li Jie,Duan Mei. Analysis on Contact and Stable Squirm of Multiply Bellows[J]. Development and Application of Materials, 2011,26(6):53-57.
[4]熊永华,杜发荣,钟玉平. 金属波纹管的动态特性分析与振动试验研究[J]. 中国机械工程,2008,19(10):1117-1180.
Xiong Yonghua,Du Farong,Zhong Yuping. Dynamics Analysis and Experimental Study on a Metal Bellow [J]. China Mechanical Engineering,2008,19(10):1117-1180.
[5]宋林红,黄乃宁,王志云,等. 金属波纹管低周疲劳寿命及可靠性的研究[J]. 压力容器,2011,28(1):12-17.
Song Linhong,Huang Naining,Wang Zhiyun,et al. Research on Metal Bellows Low-cycle Fatigue Life and Reliability [J]. Pressure Vessel Technology,2011,28(1):12-17.
[6]Crum J R, Eisinger N C, Parsons R S. Failure Mechanisms in Automotive Exhaust Decouplers [J].SAE,2004-01-0858.
[7]孙启新,董玉平.基于ANSYS的U形波纹管疲劳寿命分析[J]. 机械设计与制造工程,2007,39(7):48-59,61.
Sun Qixin,Dong Yuping. The Fatigue Life Analysis of U- form Corrugated Shell Based on ANSYS[J]. Machine Design and Manufacturing Engineering, 2007,39(7):48-59,61.
[8]《机械工程材料性能数据手册》编委会. 机械工程材料性能数据手册[M].北京:机械工业出版社,1994.
[9]周最. 航天用燃气阀波纹管组件刚度与疲劳寿命分析[D].北京:北京理工大学,2015.
[10]INC. Standards of the Expansion Joint Manufacturers Association [S]. New York:INC,2008.
[11]姚卫星. 结构疲劳寿命分析[M].北京:国防工业出版社,2003.
[12]沈渡,丁渭平,李洪亮,等. 汽车排气系统疲劳耐久性的 CAE 分析研究[J]. 汽车技术,2010(6):29-33.
Shen Du,Ding Weiping,Li Hongliang, et al. CAE Analysis Study of Automotive Exhaust System Fatigue Durability [J].Automobile Technology,2010(6):29-33.
[13]Cioto R, Collares A R,Zuffo C H. The Effect of Delta Ferrite on the Fatigue Behavior of High Resistance Threaded Fastener[J]. SAE,2008-36-0063.
[14]李永生,李建国. 波形膨胀节实用技术——设计、制造与应用[M]. 北京:化学工业出版社,2000.
|