[1]黄珍媛,阮锋,张寒,等. IT制件精密级进模关键技术的现状与发展[J].锻压技术, 2005,30(5): 98-100.
Huang Zhenyuan, Ruan Feng, Zhang Han, et al.Status and Development of the Precise Progressive Die Key Technology of the IT Products[J]. Forging & Stamping Technology, 2005,30(5): 98-100.
[2]林建平. 我国冷冲模发展现状及发展建议[J].电加工与模具, 2010(增1): 26-30.
Lin Jianping. Discussion and Development Proposal of Cold Die in China[J]. Electromachining & Mould, 2010(S1): 26-30.
[3]中国模具工业协会. 模具行业“十二五”发展规划[J].模具工业,2011,37(1): 1-8.
China Die & Mould Industry Association. The “Twelfth Five-Year” Development Plan of Mould & die Industry[J]. Die & Mould Industry, 2011, 37(1):1-8.
[4]Lemaitre J. A Continuous Damage Mechanics Model for Ductile Fracture[J]. Journal of Engineering Materials & Technology, 1985, 107(1):83-89.
[5]Goijaerts A M, Govaert L E, Baaijens F P T. Characterisation of Ductile Fracture in Metal Blanking[J]. Journal of Materials Processing Technology, 2001,110:312-323.
[6]Xie X L, Zhao Z, Song Y U, et al.Mechanism of Localized Severe Plastic Deformation and Damage Fracture in Fine-blanking Using Mixed Displacement and Pressure FEM[J]. Transactions of Nonferrous Metals Society of China, 2006, 16(5):1021-1028.
[7]黄珍媛, 阮锋, 周驰,等. 薄板精密冲裁的变形过程和机理研究[J]. 锻压装备与制造技术, 2009, 44(1):46-48.
Huang Zhenyuan, Ruan Feng, Zhou Chi, et al.The Procedure and Mechanics Research of Precision Blanking Deformation of Thin Sheet Metal[J]. China Metal Forming Equipment & Manufacturing Technology, 2009, 44(1): 46-48.
[8]邓明, 王正立, 吕琳. 闭挤式精冲变形区应力状态对断裂损伤的影响[J]. 塑性工程学报, 2011, 18(1):67-71.
Deng Ming, Wang Zhengli, Lv Lin.Influence of the Stress State of Deformation Area on Fracture Damage during Closed Extruding Fine-blanking[J]. Journal of Plasticity Engineering, 2011, 18(1):67-71.
[9]潘励, 陈康敏, 周飞. 韧性断裂的微孔损伤理论分析[J]. 江苏大学学报(自然科学版), 2003, 24(1):83-86.
Pan Li, Chen Kangmin, Zhou Fei.Theoretical Analysis on Micro-void Damage for Ductile Fracture[J]. Journal of Jiangsu University (Natural Science Edition), 2003, 24(1): 83-86.
[10]姜薇, 李亚智, 刘敬喜,等. 基于微孔洞细观损伤模型的金属剪切失效分析[J]. 华中科技大学学报(自然科学版), 2015, 43(1):24-29.
Jiang Wei, Li Yazhi, Liu Jingxi, et al. Modeling of Metallic Shear Failure by Void-based Meso-damage Model[J]. Journal of Huazhong University of Science & Technology (Natural Science Edition), 2015, 43(1): 24-29.
[11]贾建军, 彭颖红, 阮雪榆. 精冲过程的韧性断裂[J]. 上海交通大学学报, 1999, 2(2):181-183.
Jia Jianjun, Peng Yinghong, Ruan Xueyu. Ductile Fracture in Fine-blanking Process[J]. Journal of Shanghai Jiaotong University, 1999, 2(2): 181-183.
[12]贾建军. 精冲塑性变形损伤和韧性断裂的刚塑性有限元分析[D].上海:上海交通大学, 1998.
[13]Freudenthal A M. The Inelastic Behavior of Engineering Materials and Structures[M]. New York:Wiley,1950.
[14]Rice J R, Tracey D M. On the Ductile Enlargement of Voids in Triaxial Stress Fields[J]. Journal of the Mechanics & Physics of Solids, 1969, 17(69):201-217.
[15]Oyane M, Sato T, Okimoto K, et al. Criteria for Ductile Fracture and Their Applications[J]. Journal of Mechanical Working Technology, 1980, 4(1):65-81.
[16]Cockcroft M G, Latham D J. Ductility and the Workability of Metals[J]. Journal of the Institute of Metals, 1968, 96: 33-39.
[17]Brozzo P, Deluca B, Rendina R. A New Method for the Prediction of Formability Limits in Metal Sheets, Sheet Metal Forming and Formability[C]//Proceedings of the Seventh Biannual Conference of the International Deep Drawing Research Group.Amsterdam, 1972:9-13.
[18]Goijaerts A M. Prediction of Ductile Fracture in Metal Blanking[D]. Eindhoven: Eindhoven University of Technology, 1999.
[19]Goijaerts A M, Govaert L E, Baaijens F P T. Prediction of Ductile Fracture in Metal Blanking[J]. Technische Universiteitndhoven, 1999, 122(3):476-483.
[20]Goijaerts A M, Govaert L E, Baaijens F P T. Evaluation of Ductile Fracture Models for Different Metals in Blanking[J]. Journal of Materials Processing Technology, 2001, 110(3):312-323.
[21]Hambli R, Reszka M. Fracture Criteria Identification Using an Inverse Technique Method and Blanking Experiment[J].International Journal of Mechanical Sciences,2002, 44(7):1349-1361.
[22]Shim K H, Lee S K, Kang B S, et al. Investigation on Blanking of Thin Sheet Metal Using the Ductile Fracture Criterion and Its Experimental Verification[J]. Journal of Materials Processing Technology, 2004, 155(21):1935-1942.
[23]Rafsanjani A, Abbasion S, Farshidianfar A, et al. Investigation of the Viscous and Thermal Effects on Ductile Fracture in Sheet Metal Blanking Process[J]. International Journal of Advanced Manufacturing Technology, 2009, 45(5/6): 459-469.
[24]Subramonian S. Improvement of Punch and Die Life and Part Quality in Blanking of Miniature Parts[D].Columbus: The Ohio State University, 2013.
[25]Komori K. Simulation of Crack Arrest in Blanking Using the Node Separation Method[J]. International Journal of Mechanical Sciences, 2013, 68(2):150-159.
[26]秦泗吉. 板材剪切与冲裁加工过程有限元模拟及实验研究[D].秦皇岛:燕山大学, 2002.
[27]方刚,曾攀.金属板料冲裁过程的有限元模拟[J].金属学报, 2009,37(6): 653-657.
Fang Gang, Zeng Pan.Finite Element Simulation for Blanking Process of Sheet Metal[J]. Acta Metallurgica Sinica, 2009,37(6): 653-657.
[28]方刚,雷丽萍,曾攀.金属塑性成形过程延性断裂的准则及其数值模拟[J].机械工程学报, 2002, 38(增1): 21-25.
Fang Gang, Lei Liping, Zeng Pan.Criteria of Metal Ductile Fracture and Numerical Simulation for Metal Forming[J]. Chinese Journal of Mechanical Engineering, 2002, 38(S1): 21-25.
[29]彭燕华, 黄珍媛, 丘宏扬. 锡磷青铜QSn6.5-0.1冲裁断裂系数的求取[J]. 机电工程技术, 2007, 36(3):55-56.
Peng Yanhua, Huang Zhenyuan, Qiu Hongyang. The Obtaining of the Fracture Criteria of QSn6.5-0.1[J]. Journal of the Institute of Metals, 2007, 36(3): 55-56.
[30]黄珍媛. IT制件高速精密级进冲压的关键技术研究[D].广州:华南理工大学, 2007.
[31]黄敏飞. 薄板冲裁有限元模拟及高速冲裁研究[D].广州:华南理工大学, 2006.
[32]汪金飞, 刘玉慧. 冲裁成形与断裂的数值模拟[J]. 锻压装备与制造技术, 2007, 42(2):72-74.
Wang Jinfei, Liu Yuhui. Numerical Simulation of Blanking Shaping and Fracture[J]. China Metal forming Equipment & Manufacturing Technology, 2007, 42(2):72-74.
[33]黄志超, 占金青, 陈伟. 基于Ayada损伤模型的板料冲裁过程数值模拟[J]. 机械设计与制造, 2007(10):49-51.
Huang Zhichao, Zhan Jinqing, Chen Wei.The Numerical Simulation for Metal Sheet Blanking Based on Ayada Damage Criteria[J]. Machinery Design & Manufacture, 2007(10):49-51.
[34]谢晓龙, 赵震, 虞松,等. 基于Oyane损伤和断裂模型的厚板精冲过程数值模拟和缺陷预测[J]. 上海交通大学学报, 2006, 40(6):927-931.
Xie Xiaolong, Zhao Zhen, Yu Song, et al. The Numerical Simulation and Failure Prediction for Thick Sheet Metal Fine-blanking Based on Oyane Damage and Fracture Model[J]. Journal of Shanghai Jiaotong University, 2006, 40(6):927-931.
[35]Yu S, Xie X, Zhang J, et al. Ductile Fracture Modeling of Initiation and Propagation in Sheet-metal Blanking Processes[J]. Journal of Materials Processing Technology, 2007, 187(4):169-172.
[36]Yu S, Zhao J. Investigation on Blanking of Thick Sheet Metal Using the Ductile Fracture Initiation and Propagation Criterion[J]. Journal of Shanghai Jiaotong University, 2012, 17(5):531-536.
[37]Sartkulvanich P, Kroenauer B, Golle R, et al. Finite Element Analysis of the Effect of Blanked Edge Quality Upon Stretch Flanging of AHSS[J]. CIRP Annals-Manufacturing Technology, 2010, 59(1):279-282.
[38]Maiti S, Ambekar A, Singh U, et al. Assessment of Influence of Some Process Parameters on Sheet Metal Blanking[J].Journal of Materials Processing Technology, 2000, 102(102):249-256.
[39]Hatanaka N, Yamaguchi K, Takakura N, et al. Simulation of Sheared Edge Formation Process in Blanking of Sheet Metals[J]. Journal of Materials Processing Technology, 2003, 140(1):628-634.
[40]Lin Z C, Chang D Y. A Band-type Network Model for the Time-series Problem Used for IC Leadframe Dam-bar Shearing Process[J]. International Journal of Advanced Manufacturing Technology, 2009, 40(11/12): 1252-1266.
[41]Lo S P, Chang D Y, Lin Y Y. Quality Prediction Model of the Sheet Blanking Process for Thin Phosphorous Bronze[J]. Journal of Materials Processing Technology, 2007, 194(1/3): 126-133.
[42]Husson C, Correia J P M, Daridon L, et al.Finite Elements Simulations of Thin Copper Sheets Blanking: Study of Blanking Parameters on Sheared Edge Quality[J]. Journal of Materials Processing Technology, 2008, 199(1/3):74-83.
[43]Soares J A, Gipiela M L, Lajarin S F, et al. Study of the Punch-die Clearance Influence on the Sheared Edge Quality of Thick Sheets[J]. International Journal of Advanced Manufacturing Technology, 2013, 65(1/4): 451-457.
[44]Su C J, Dong X H, Guo S M, et al. Research on Parameters Optimization of Bilateral Ring Gear Blank-holder in Thick-plate Fine Blanking[J]. Frattura E Integrita Strutturale, 2014, 8(30):502-514.
[45]赵中华, 张猛, 韦习成. 冲裁速度对冲压件断面质量的影响[J]. 塑性工程学报, 2010, 17(4):45-49.
Zhao Zhonghua, Zhang Meng, Wei Xicheng.Study of Influence of Blanking Velocity on Section Quality of Stamping Work-piece[J]. Journal of Plasticity Engineering, 2010, 17(4):45-49.
[46]Greban F, Monteil G, Roizard X. Influence of the Structure of Blanked Materials upon the Blanking Quality of Copper Alloys[J]. Jornal of Maral rong hnology, 2007, 186(1/3):27-32.
[47]Mucha J. An Experimental Analysis of Effects of Various Material Tool's Wear on Burr during Generator Sheets Blanking[J]. International Journal of Advanced Manufacturing Technology,2010, 50(5/8):495-507.
[48]Ghiotti A, Bruschi S, Regazzo P. Shear Surface Control in Blanking by Adaptronic Systems[J]. Procedia Engineering, 2014, 81:2512-2517.
[49]张磊, 牛秋林, 安庆龙,等. 冲裁间隙与速度对冲裁件质量影响的实验研究[J]. 模具制造, 2011, 11(3):23-25.
Zhang Lei, Niu Qiulin, An Qinglong. Experimental Study of Effects of Blanking Clearance and Stamping Speed on the Quality of Blanking Pieces[J]. Die & Mould Manufacture, 2011, 11(3):23-25.
[50]黄珍媛, 阮锋. Deform在薄板精密冲裁数值模拟中的应用[C]//第三届中国CAE工程分析技术年会暨2007全国计算机辅助工程(CAE)技术与应用高级研讨会.大连,2007:202-205.
[51]谷维亮. 连接器端子件级进模的冲裁质量与磨损研究[D].镇江:江苏大学, 2009.
[52]Achouri M, Gildemyn E, Germain G, et al.Influence of the Edge Rounding Process on the Behaviour of Blanked Parts: Numerical Predictions with Experimental Correlation[J]. International Journal of Advanced Manufacturing Technology, 2013, 71: 1019-1032.
[53]Ismail A B, Rachik M, Mazeran P E, et al.Material Characterization of Blanked Parts in the Vicinity of the Cut Edge Using Nanoindentation Technique and Inverse Analysis[J]. International Journal of Mechanical Sciences, 2009, 51(11/12):899-906.
[54]Gaudillière C, Ranc N, Larue A, et al. Investigations in High Speed Blanking: Cutting Forces and Microscopic Observations[J]. Epj Web of Conferences, 2010, 6(14):1221-1221.
[55]Sapanathan T, Ibrahim R, Khoddam S, et al. Shear Blanking Test of a Mechanically Bonded Aluminum/copper Composite Using Experimental and Numerical Methods[J]. Materials Science & Engineering A, 2014,623:153-164.
[56]Hu D C, Chen M H, Ouyang J D, et al. Finite Element Analysis of the Thermal Effect in High-speed Blanking of Thick Sheet Metal[J]. International Journal of Advanced Manufacturing Technology, 2015,80(9/12):1-7.
[57]Demmel P, Hoffmann H, Golle R, et al.Interaction of Heat Generation and Material Behaviour in Sheet Metal Blanking[J]. CIRP Annals-Manufacturing Technology, 2015, 64(1):249-252.
[58]Subramonian S, Altan T, Campbell C, et al. Determination of Forces in High Speed Blanking Using FEM and Experiments[J]. Journal of Materials Processing Technology, 2013, 213(12):2184-2190.
|