[1]Velinsky S A. Design and Mechanics of Multi-lay Wire Strand[J].Journal of Mechanical Design,1988,110(2): 152-160.
[2]五弓勇雄.金属塑性加工金属[M].陈天忠,张国荣,译.北京:冶金工业出版社,1987.
[3]张钫,张平萍.影响钢丝绳弯曲疲劳试验因素的分析[J].金属制品,2006,32(3):46-47.
Zhang Fang, Zhang Pingping. Analysis of Effect Factors on Bend and Fatigue Test of Steel Wire Rope[J]. Steel Wire Products, 2006, 32(3):46-47.
[4]Jiang W G, Henshall J L,Walton J M.A Concise Finite Element Model for Three-layered Straight Wire Rope Strand[J]. International Journal of Mechanical Sciences,2000,42(1): 63-86.
[5]马军,葛世荣,张德坤.钢丝绳股内钢丝的载荷分布[J].机械工程学报,2009,45(4):259-264.
Ma Jun,Ge Shirong,Zhang Dekun. Load Distribution on the Unit of the Wire Rope Strand[J].Journal of Mechanical Engineering, 2009, 45(4): 259-264.
[6]马军,葛世荣,张德坤.钢丝绳应力及股内钢丝变形的相关性研究[J]. 煤炭科学技术,2009,3:73-76.
Ma Jun,Ge Shirong,Zhang Dekun. Research on Relativity between Steel Cable Stress and Steel Wire Deformation of Strand[J]. Coal Since and Technology, 2009,3:73-76.
[7]孙建芳,王桂兰,张海鸥.考虑接触摩擦的金属捻线捻制成形过程计算机模拟[J].系统仿真学报,2005,17(7): 1746 -1750.
Sun Jianfang, Wang Guilan, Zhang Haiou. Nume- rical Simulation for Laying Wire Rope with Friction Contact[J].Journal of System Simulation,2005,17(7): 1746 -1750.
[8]王桂兰,赵瑞敏,孙建芳,等.基于微分几何学的钢丝绳结构CAD[J].华中科技大学学报(自然科学版),2003,31(6):4-6.
Wang Guilan,Zhao Ruimin,Sun Jianfang.CAD of Wire Rope Structure Based on the Differential Geometry[J].J. Huazhong Univ. of Sci. & Tech. (Natural Science Edition), 2003,31(6):4-6.
[9]Lee W K, Casey N F,Gray T G F.Helix Geometry in Wire Rope[J].Wire Ind.,1987,54(8): 461-468.
[10]Lee W K. An Insight into Wire Rope Geometry[J]. International Journal of Solids and Structure,1991,28(4):471-490.
[11]Erdnmez C. N-tuple Complex Helical Geometry Modeling Using Parametric Equations[J].Engineering with Computers, 2014,30(5): 715-726.
[12]Stanova E, Fedorko G, Fabian M,et al. Computer Modeling of Wire Strands and Ropes Part I:Theory and Computer Implementation[J]. Advances in Engineering Soft Ware,2011,42(6): 305-315.
[13]Hobbs R E, Nabijou S. Changes in Wire Curvature as a Wire Rope Is Bent Over a Sheave[J]. The Journal of Strain Analysis for Engineering Design, 1995,30(4): 271-281.
[14]Nabijou S,Hobbs R E.Relative Movements within Wire Ropes Bent over Sheaves[J].The Journal of Strain Analysis for Engineering Design,1995,30(2):155-165.
[15]李晓豁,张惠波,战林,等.天轮处提升钢丝绳的曲率和挠率分析[J].世界科技研究与发展,2012, 34(2): 198-200.
Li Xiaohuo,Zhang Huibo,Zhan Lin, et al.Analysis on Curvature and Torsion of Hoisting Rope Bent over Sheave[J].World Sci. Tech. R&D,2012, 34(2): 198-200.
[16]胡茂.滑轮直径对钢丝绳寿命影响研究[D].武汉:武汉理工大学,2012. |