[1]郭东明,刘战强,蔡光起,等. 中国先进加工制造工艺与装备技术中的关键科学问题[J]. 数字制造科学, 2005, 3(4):1-36.
Guo Dongming,Liu Zhanqiang,Cai Guangqi, et al.Crucial Technical Problems in China’s Advanced machining, Manufacturing and Relevant Equipment Technologies[J]. Manufacture Science, 2005, 3(4):1-36.
[2]雷源忠,黎明. 关于发展先进制造技术基础性研究的策略构想[J]. 中国科学基金, 1996(1):27-30.
Lei Yuanzhong,Li Ming.Strategy for the Basic Research on Developing Adcanced Manufacturing Technology[J]. Bulletin of National Science Foundation of China, 1996(1):27-30.
[3]Saleh T, Rahman M S, Lim H S, et al. Development and Performance Evaluation of an Ultraprecision ELID Grinding Machine[J]. Materials Processing Technology, 2007, 192-193:287-291.
[4]胡德金, 蔡兰蓉, 贾妍. 超硬磨料砂轮电加工修整技术及其最新进展[C]// 2007年中国机械工程学会年会之第12届全国特种加工学术会议论文集.长沙:中国机械工程学会特种加工分会, 2007:142-146.
[5]Tonshoff H K, Karpuschewski B, Mandrysc T, et al. Grinding Process Achievements and Their Consequences on Machine Tools Challenges and Opportunities[J]. CIRP Annals-Manufacturing Technology, 1998, 47(2):651- 668.
[6]陈根余,谢小柱, 李力钧,等. 超硬磨料砂轮修整与激光修整新进展[J]. 金刚石与磨料磨具工程, 2002(2):8-12.
Chen Genyu, Xie Xiaozhu, Li Lijun, et al.Superabra- sive Grinding Wheel Dressing and Laser Truing Progress[J]. Diamond & Abrasives Engineering, 2002(2):8-12.
[7]今井祥人. 电火花加工——学以致用[M].郭常宁,译.北京:机械工业出版社, 2012.
[8]刘志东. 特种加工[M]. 北京:北京大学出版社, 2013.
[9]Tsai H C, Yan B H, Huang F Y. EDM Performance of Cr/Cu-based Composite Electrodes[J]. Int. J. of Machine Tools and Manufacture, 2003, 43(3):245-252.
[10]Kalpajians S, Schmidsr S R. Manufacturing Processed for Engineering Materials[M]. 4th ed. New Jersey:Prentice Hall, 2003.
[11]Suzuki K,Uematsu T,Nakagawa T.On-machine Trueing/Dressing of Metal Bond Grindingwheels by Electro-discharge Machining[J]. CIRP Annals-Manufacturing Technology, 1987, 36(1):115-118.
[12]Chen D Z, Tian Y Y. Form Dressing of Metal-bonded Diamond Wheel[C]//Proceedings of the International Symposium on Electro-machining (ISEM) IX. Nagoya:Japan Society of Electrical-Machining Engineers, 1989:18-21.
[13]Kim J D, Lee E S, Lee C Y. Crack Generation and the Effect of In-process Electro-discharge Dressing in Grinding Single Crystal MgO[J]. International Journal of Mechanical Sciences, 1995,37(6):569-583.
[14]Mohri N, Saito N, Higashi M, et al. A New Process of Finish Machining on Free Surface by EDM Methods[J]. CIRP Annals-Manufacturing Technology, 1991,40(1):207-210.
[15]Lee E S, Ahn S O. Precision Surface Grinding of Mn-Zn Ferrite with In-process Electro-discharge Dressing (IEDD)[J]. International Journal of Machine Tools & Manufacture, 1999,39(10):1655-1671.
[16]黄兆祥,熊天渝,王世民. 电火花放电能量测量及放电过程分析[J]. 工程热物理学报, 1982, 3(4):394-399.
Huang Zhaoxiang,Xiong Tianyu, Wang Shiming.Spark Energy Measuring Technology and Performance Analysis of Spark Discharge Process for Electric Spark Ignition[J]. Journal of Engineering Thermophysics, 1982, 3(4):394-399.
[17]Marin G, Pavel K, Milenko S, et al. Influence of Discharge Energy on Machining Characteristics in EDM[J]. Journal of Mechanical Science and Technology, 2012,26(1):173-179.
[18]Shao J, Zhang Y Q. Study on the Positive EDM Based on the Field Emission Theory[J]. Applied Mechanics and Materials, 2014, 494/495:424-427.
[19]Wang X K, Ying B G, Liu W G. EDM Dressing of Fine Grain Super Abrasive Grinding Wheel[J]. Journal of Materials Processing Technology, 1996,62(4):299-302.
[20]Sanchez J A, Ortega N, Lopez D L N, et al. Analysis of the Electro Discharge Dressing (EDD) Process of Large-grit Size CBN Grinding Wheels[J]. Advanced Manufacturing Technology, 2006,29(7/8):688-694.
[21]Lee E S. Surface Characteristics in the Precision Grinding of Mn-Zn Ferrite with In-process Electro-discharge Dressing[J]. Journal of Materials Processing Technology, 2000,104(3):215-225.
[22]王先逵, 应宝阁, 刘为刚,等. 金属结合剂金刚石砂轮的电火花整形[J]. 航空精密制造技术, 1995(2):19-23.
Wang Xiankui,Ying Baoge,Liu Weigang, et al.Microscopic Study of EDM Dressing for Diamond Powder Grinding Wheel[J]. Aviation Precision Manufacturing Technology,1995(2):19-23.
[23]Sancheza J A, Pombo I, Cabanes I, et al. Electrical Discharge Truing of Metal-bonded CBN Wheelsusing Single-point Electrode[J]. International Journal of Machine Tools & Manufacture, 2008,48(3/4):362-370.
[24]王艳, 邓琦林, 胡德金,等. 金刚石砂轮修整新技术的研究[J]. 电加工与模具, 2003(5):1-5.
Wang Yan,Deng Qilin,Hu Dejin, et al.Study on New Technology of Diamond Wheel Dressing[J]. Electro- machining & Mould,2003(5):1-5.
[25]Cai L R, Li M, Yang H, et al. Electrical Discharge Dressing Metal-bonded Diamond Grinding Wheels with Various Mediums[J]. Journal of Engineering Manufacture, 2013,227(1):102-108.
[26]洪建军, 蔡兰蓉, 胡德金. 不同介质中电火花修整金属基金刚石砂轮的研究[J]. 电加工与模具, 2008(6):27-30.
Hong Jianjun,Cai Lanrong,Hu Dejin.An Experimental Compare on Discharge Mediums Used for Electrical Discharge Machining(EDM) of Metal-bonded Diamond Grinding Wheel[J]. Electromachining & Mould,2008(6):27-30.
[27]Xie J, Tamaki J. An Experimental Study on Discharge Mediums Used for Electro-contact Discharge Dressing of Metal-bonded Diamond Grinding Wheel[J]. Journal of Materials Processing Technology, 2008,208(1/3):239-244.
[28]Xu M M, Li D D, Hu D J, et al. Laminated Manufacturing and Milling Electrical Discharge Dressing of Metal-bonded Diamond Grinding Wheels[J]. Journal of Engineering Manufacture, 2012,226(B1):137-144.
[29]Weingartner E, Roth R, Kuster F, et al. Electrical Discharge Dressing and Its Influence on Metal Bonded Diamond Wheels[J]. CIRP Annals-Manufacturing Technology, 2012,61(1):183-186.
[30]Wang Y, Zhou X J, Hu D J. An Experimental Investigation of Dry-electrical Discharge Assistedtruing and Dressing of Metal Bonded Diamond Wheel[J]. Int. Journal of Machine Tools & Manufacture, 2006,46(3/4):333-342.
[31]Hashimoto F, Kanai A. High Precision Trueing Method of Regulating Wheel and Effect on Grinding Accuracy[J]. CIRP Annals-Manufacturing Technology, 1983,32(1):237-239.
[32]张丙鹏, 赵文祥, 王西彬,等. 金刚石微粉烧结棒和D、GC杯型砂轮修整碟型金刚石砂轮对比研究[J]. 金刚石与磨料磨具工程, 2005(5):13-17.
Zhang Bingpeng, Zhao Wenxiang, Wang Xibin, et al.Dressing Diamond Dish Wheel with Diamond Powder Sinteredbar and wtih D Cup Wheel+GC Cup Wheel[J]. Diamond & Abrasives Engineering,2005(5):13-17.
[33]李继贤, 张飞虎. 成形砂轮修整技术研究现状[J]. 机械工程师, 2006(10):19-22.
Li Jixian, Zhang Feihu.Research Situation of the Forming Wheel Dressing Technology[J]. Mechanical Engineer,2006(10):19-22.
[34]Lavine A S, Malkin S, Jen T C. Thermal Aspects of Grinding with CBN Wheels[J]. CIRP Annals-Manufacturing Technology, 1989, 38(1):557-560.
[35]Ohmori H, Li W, Makinouchi A, et al. Efficient and Precision Grinding of Small Hard and Brittlecylindrical Parts by the Centerless Grinding Processcombined with Electro-discharge Truing Andelectrolytic In-process Dressing[J]. Journal of Materials Processing Technology, 2000,98(3):322-327.
[36]Ortega N, Sanchez J A, Aranceta J, et al. Optimisation of Grit Protrusion in the Electro-discharge Dressingprocess of Large Grit Size CBN Grinding Wheels[J]. Journal of Materials Processing Technology, 2004,149(1/3):524-529.
[37]王先逵, 应宝阁, 刘为刚. 金刚石微粉砂轮电火花修锐微观研究[J]. 制造技术与机床, 1995(12):13-16.
Wang Xiankui,Ying Baoge,Liu Weigang.Micro- scopic Study of EDM Dressing for Diamond Powder Grinding Wheel[J]. Manufacturing Technology&Machine Tool,1995(12):13-16.
[38]Zhang C, Hitoshi O, Li W. Precision Shaping of Small Diameter Wheels Using Microelectric Discharge Truing (MEDT) and Hole-machining of Al2O3 Material[J]. International Journal of Machine Tools & Manufacture, 2000,40(5):661-674.
[39]Lee E S. Surface Characteristics in the Precision Grinding of Mn-Zn Ferrite with In-process Electro-discharge Dressing[J]. Journal of Materials Processing Technology, 2000,104(3):215-225.
[40]Chen M J, Li Z A, Yu B, et al. On-machine Precision Preparation and Dressing of Ball-headed Diamond Wheel for the Grinding of Fused Silica[J]. Chinese Journal of Mechanical Engineering, 2013, 26(5):982-987.
[41]Konig W, Dauw D F, Levy G, et al. EDM-future Steps towards the Machining of Ceramics[J]. CIRP Annals-Manufacturing Technology, 1988, 37(2):623-631.
[42]许明明, 李冬冬, 胡德金. 空气介质中非金属基金刚石砂轮的修整效果[J]. 上海交通大学学报, 2011, 45(6):907-910.
Xu Mingming, Li Dongdong, Hu Dejin.Effect on Truing and Dressing Non-mental Bond Diamond Grinding Wheel in Air[J]. Journal of Shanghai Jiaotong University,2011, 45(6):907-910.
[43]Xu M M, Li D D, Hu D J, et al. Mist-jetting Electrical Discharge Dressing (MEDD) of Nonmetal Bond Diamond Grinding Wheelsusing Conductive Coating[J]. Int. Journal of Advanced Manufacturing Technology, 2012,63(9/12):955-961.
[44]Iwai M, Ninomiya S, Ueda T, et al. Electrical Discharge Truing of a Vitrified Bonded Superabrasive Wheel with Electrical Conductivity[C]//International Conference on Manufacturing Engineering and Automation (ICMEA 2012). Zurich:Trans. Tech. Publications Ltd., 2012:591-593.
[45]Lok Y K, Lee T C. Processing of Advanced Ceramics Using the Wire-cut EDM Process[J]. Journal of Materials Processing Technology, 1997,63(1/3):839-843.
[46]Rhoney B K, Shih A J, Scattergood R O, et al. Wire Electrical Discharge Machining of Metal Bond Diamond Wheels for Ceramic Grinding[J]. International Journal of Machine Tools & Manufacture, 2002,42(12):1355-1362.
[47]Rhoney B K, Shih A J, Scattergood R O, et al. Wear Mechanism of Metal Bond Diamond Wheels Trued by Wire Electrical Discharge Machining[J]. Wear, 2002,252(7/8):644-653.
[48]Konrad W, Eduardo W, Marc B. In-process Wire Electrical Discharge Dressing (IWEDD) of Metal Bonded Diamond Wheels[J]. CIRP Annals-Manufacturing Technology, 2013, 62(1):339-342.
[49]Tamaki J, Kondoh K, Iyama T. Electrocontact Discharge Dressing of Metal Bonded Diamond Grinding Wheel Using a Hybrid Electrode[J]. Journal of the Japan Society for Precision Engineering, 1999, 65(11):1628-1632.
[50]Xie J, Tamaki J. In-process Evaluation of Grit Protrusion Feature for Fine Diamond Grindingwheel by Means of Electro-contact Discharge Dressing[J]. Journal of Materials Processing Technology, 2006,180(1/3):83-90.
[51]Lu Y J, Xie J, Wu K K, et al. Experimental Study on Dry Electrical Contact Discharge (ECD) Dressing Parameters of Coarse Diamond Grinding Wheel[C]//16th International Symposium on Advances in Abrasive Technology.Zurich:Trans. Tech. Publications Ltd., 2013:746-750. |