Research on Driving Mechanism Dynamics in UHV Breaker with Multiple Clearance Joints

Abstract

Abstract:

A dynamics model of the driving mechanism in UHV breaker with multiple clearances was established to study the effects of clearances on its dynamics characteristics. In this model, a spring-damper model was used to simulate the normal contact force, and a modified Coulomb friction model was used to simulate the tangential contact force. Dynamics simulation analysis was presented according to the driving mechanism during the breaking process of UHV breaker under special working condition with a multi-body dynamics analysis software ADAMS. The simulation results show that the effects of kinematic pair clearance are not obvious on the displacement of the driving mechanism, while obvious on its speed and acceleration. With the clearance increasing, these effects are more obvious, and the stability of the mechanism's movement is worse.

Key words: clearance, contact-impact, dynamics characteristic, computer simulation, ultra-high voltage(UHV) breaker

摘要：

为研究间隙对特高压断路器传动机构动力学特性的影响，利用非线性弹簧-阻尼模型模拟了接触碰撞中的法向力，利用修正的库仑摩擦力模型模拟了接触碰撞中的切向力，建立了该机构含多间隙副的多体动力学模型。运用多体系统动力学软件ADAMS，在特定工况下对传动机构的合闸过程进行了动力学仿真分析。仿真结果表明，运动副间隙对传动机构位移影响较小，但对速度和加速度影响较大，且随着间隙增大，这种影响越显著，机构的运动稳定性越差。

关键词: 间隙, 接触碰撞, 动力学特性, 计算机仿真, 特高压断路器

CLC Number:

Wu Shijing, Li Fei, Zhao Wenqiang, Hu Jicai, Zhang Zenglei. Research on Driving Mechanism Dynamics in UHV Breaker with Multiple Clearance Joints[J]. China Mechanical Engineering, 2015, 26(13): 1719-1724.

巫世晶, 李菲, 赵文强, 胡基才, 张增磊. 含多间隙副特高压断路器传动机构动力学特性研究[J]. 中国机械工程, 2015, 26(13): 1719-1724.

References

[1]张有强，丁旺才，孙闯.单自由度含间隙和干摩擦碰撞振动系统的分岔与混沌[J].振动与冲击，2008，27（7）：102-105.
Zhang Youqiang，Ding Wangcai，Sun Chuang.Bifurcation and Chaos of Single-freedom Vibro-impact System with Clearance and Dry Friction[J].Journal of Vibration and Shock，2008，27（7）：102-105.
[2]Dubowsky S，Deck J F，Costello H. The Dynamic Modeling of Flexible Spatial Machine Systems with Clearance Connections[J]. Mechanical Design，1987，109（1）：87-94.
[3]Kakizaki T，Deck J F，Dubowsky S.Modeling the Spatial Dynamics of Robotic Manipulators with Flexible Links and Joint Clearances[J].Mechanical Design，1993，115（4）：839-847.
[4]王国庆，刘宏昭.多间隙运动副平面连杆机构动态特性研究[J].机械设计，2002，19（1）：27-30.
Wang Guoqing，Liu Hongzhao.Dynamic Research on Planar Linkage with Multiple Clearance Joints[J].Journal of Machine Design，2002，19（1）：27-30.
[5]苗红霞，王宏华，齐本胜.高压断路器操动机构的动力学建模与仿真研究[J].计算机工程与应用，2010，46（17）：212-215.
Miao Hongxia,Wang Honghua，Qi Bensheng.Research on Dynamic Modeling and Simulation of Operating Mechanism of High-voltage Circuit Breaker[J].Computer Engineering and Applications，2010，46（17）：212-215.
[6]杨武，荣命哲，陈德桂，等.基于机构动力学特性仿真的高压断路器优化设计[J].西安交通大学学报，2002，36（12）：1211-1214.
Yang Wu，Rong Mingzhe，Chen Degui，et al.Optimum Design of High-voltage Circuit Breakers Based on Mechanism Dynamic Features Simulation[J].Journal of Xi’an Jiaotong University，2002，36（12）：1211-1214.
[7]朴吉兴，徐国政，黄瑜珑.ZN12-12型断路器动力学仿真与分析[J].高压电器，2007，43（3）：169-175.
Piao Jixing，Xu Guozheng，Huang Yulong.Dynamic Simulation and Analysis of Type ZN12-12 Circuit Breaker[J].High Voltage Apparatus，2007，43（3）：169-175.
[8]Kim J H，Ahn K Y，Kim S H.Optimal Synthesis of a Spring Actuated Cam Mechanism Using a Cubic Spline[J].Mechanical Engineering Science，2002，216：875-883.
[9]李运初，王魁.基于ADAMS的含运动副间隙破碎机动力学仿真分析[J].机械传动，2011，35（10）：1-3.
Li Yunchu，Wang Kui.The Dynamic Simulation Analysis of Jaw Crusher Contained Joint Clearance Based on ADAMS[J]. Journal of Mechanism Transmission，2011，35（10）：1-3.
[10]姚建雄，谭建平，杨斌.圆柱滚子轴承磨损失效的ADAMS仿真及实验[J].中国机械工程，2014，25（17）：2327-2343.
Yao Jianxiong，Tan Jianping，Yang Bin.Kinetic Simulation on ADAMS and Experimental Study of Wear Failure of Cylindrical Roller Bearings[J]. China Mechanical Engineering，2014，25（14）：2327-2343.
[11]Liu Cheng，Tian Qiang，Hu Haiyan.Dynamics and Control of a Spatial Rigid-flexible Multibody System with Multiple Cylindrical Clearance Joints[J].Mechanism and Machine Theory，2012，52：106-129.
[12]Flores P，Ambrósio J.Revolute Joints with Clearance in Multibody Systems[J].Computer & Structures，2004，82：1359-1369.
[13]张福民，王富东，杨俊.ZN85A—40.5真空断路器触头传动结构的动力学仿真[J].高压电器，2010，46（2）：20-22.
Zhang Fumin，Wang Fudong，Yang Jun.Dynamic Simulation of Contact Drivers for ZN85A-405 Vacuum Circuit Breaker[J]. High Voltage Apparatus，2010，46（2）：20-22.
[14]谢心意，唐文献，管瑞良，等.断路器机构系统等效动力学建模与仿真分析[J].现代制造工程，2006（3）：102-105.
Xie Xinyi，Tang Wenxian，Guan Ruiliang，et al.Research on Equivalence Dynamic Modeling and Simulation Analysis for Mechanisms of ACB[J]. Modern Manufacturing Engineering，2006（3）：102-105.

[1]	YI Jun, YI Tao, CHEN Bing, DENG Hui, ZHOU Wei, . Modeling and Experimental Research of Ground Workpiece Surface Topography after Grinding with Structured Grinding Wheels [J]. China Mechanical Engineering, 2023, 34(22): 2711-2720.
[2]	ZHANG Lei, XU Haijun, ZHANG Xiang, XU Xiaojun, ZOU Teng'an. Characteristics of High Compact Power Transmission Mechanisms of Crossed Swash-plates [J]. China Mechanical Engineering, 2021, 32(18): 2165-2174.
[3]	LIU Yanwei, PAN Hao, LIU Sanwa, LI Shujuan, LI Yan. Design and Implementation of a Tilt-deformable Quadrotor [J]. China Mechanical Engineering, 2021, 32(16): 1930-1936.
[4]	TAN Yang1；ZHANG Yu2；LIU Libing1；YANG Zeqing1. Spindle System Digital Twin for Dynamics Characteristic Monitoring [J]. China Mechanical Engineering, 2020, 31(18): 2231-2238，2246.
[5]	WANG Yao1;ZHANG Tiefeng2;SHI Weiyi2;FU Zhuang1;CHEN Guangbiao1. Dynamics Modelling and Analysis of Elasto-plastic Contact-impact of a Rod-like Structure with a Oblique Flat Surface [J]. China Mechanical Engineering, 2020, 31(11): 1261-1269.
[6]	WU Junting1;WU Jun1，2;CAO Libo1;WU Menghua1. Matching Design and Folding Method for New Type Airbags in Coachs [J]. China Mechanical Engineering, 2017, 28(24): 2995-3000,3012.
[7]	Mao Wengui, Han Xu, Liu Guiping. Research on Dynamic Characteristics of Sliding Bearing Nonlinear Oil-film Based on Fluid-structure Interaction [J]. China Mechanical Engineering, 2014, 25(3): 383-387,403.
[8]	QIN Da-Tong-1, YANG Jun-1, 2, ZHOU Zhi-Gang-1, 3, CHEN Hui-Chao-1. Dynamics Characteristic of Planetary Gear System of Wind Turbines under Varying Load [J]. China Mechanical Engineering, 2013, 24(3): 295-301.
[9]	SU Zhong-Gen-1, LONG Jiang-Qi-2, ZHOU Shi-Jia-2. Safety Simulation of Rear-end Collision and Experimental Study for Extended Range Electric Vehicle [J]. China Mechanical Engineering, 2013, 24(07): 964-970.
[10]	SUN Wei-1, LU Meng-2, HONG Bo-1, WEN Bang-Chun-1. Dynamics and Statics Analysis of Column-Spindle System Considering Guide Joint Characteristics [J]. China Mechanical Engineering, 2012, 23(23): 2874-2878.
[11]	LIU Yong-Jiang, ZUO Cheng-Ji, LI Nie-Rong. Simulation Prediction and Experimental Study on Exhaust Noise of Engine  [J]. China Mechanical Engineering, 2011, 22(14): 1664-1668.
[12]	WANG Ai-Lun, HUANG Hui-Fan. Research on Test Method of Mistuned Bladed Disk System Vibration Based on Bond Graph [J]. China Mechanical Engineering, 2010, 21(13): 1513-1518.
[13]	Chen Xi;Zhang Hua;Chen Nan;Wu Yinong. Experimental Study on Dynamics Characteristics of Moving-magnet Linear Compressor [J]. J4, 2009, 20(16): 0-1895.
[14]	Lu Yong, Cao Libo, Wu Jun. Study on the Structural Improvement Methods for Car Side Impact Safety [J]. China Mechanical Engineering, 2008, 19(24): 3006-3011.
[15]	Ge Wenjie, Huang Jie, Yang Fang. Research on the Kinematic Characteristics of Bionic Kangaroo-Hopping Robot during Flight Phase [J]. China Mechanical Engineering, 2007, 18(21): 2521-2524.