[1]An Q L, Fu Y C, Xu J H. Experimental Study on Turning of TC9 Titanium Alloy with Cold Water Mist Jet Cooling[J]. International Journal of Machine Tools and Manufacture, 2011, 51(6): 549-555.
[2]Su Y, He N, Li L, et al. An Experimental Investigation of Effects of Cooling/Lubrication Conditions on Tool Wear in High-speed End Milling of Ti-6Al-4V[J]. Wear, 2006, 261(7/8): 760-766.
[3]黄伯云,李成功.中国材料工程大典(第四卷)——有色金属材料工程(上)[M].北京:化学工业出版社,2006.
[4]王珉,张幼桢.钛合金端铣时硬质合金刀具磨损机理的研究[J].航空学报,1988,9(9): A495-A498.
Wang Min, Zhang Youzhen. Investigationon Wear Mechanism of Cemented Carbide Tool in Milling of Titanium Alloys[J]. Acta Aeronauticaet Astronautica Sinica, 1988, 9(9): A495-A498.
[5]Hong S Y, Ding Y. Cooling Approaches and Cutting Temperatures in Cryogenic Machining of Ti-6Al-4V[J]. International Journal of Machine Tools and Manufacture, 2001, 41(10): 1417-1437.
[6]苏宇,何宁,李亮,等. 低温氮气射流对钛合金高速铣削加工性能的影响[J].中国机械工程,2006,17(11): 1183-1187.
Su Yu, He Ning, Li Liang, et al. Effects of Cryogenic Nitrogen Gas jet on Machinability of Ti-Alloy in High Speed milling[J].China Mechanic Engineering, 2006,17(11): 1183-1187.
[7]苏宇,何宁,李亮. 低温最小量润滑高速铣削钛合金的试验研究[J].中国机械工程,2010,21(22):2665-2670.
Su Yu, He Ning, Li Liang. Experimental Study on High Speed Milling Titanium Alloys Using Cryogenic Minimum Quantity Lubrication[J]. China Mechanic Engineering, 2010,21(22):2665-2670.
[8]Lopez de Lacalle L N,Perez J,Llorente J I,et al. Advanced Cutting Conditions for the Milling of Aeronautical Alloys[J]. Journal of Materials Processing Technology,2000,100:1-11.
[9]Shokrani A, Dhokia V. Environmental Conscious Machining of Difficult-to-machine Materials with Regard to Cutting Fluids[J]. International Journal of Machine Tools and Manufacture, 2012,57: 83-101.
[10]Claudin C,Mondelin A. Effects of a Straight Oil on Friction at the Tool-Workmaterial Interface in Machining[J]. International Journal of Machine Tools and Manufacture, 2010,50: 681-688.
[11]Jawaid A, Haron C H C, Abdullah A. Tool Wear Characteristics in Turning of Titanium Alloy Ti-6246[J]. Journal of Materials Processing Technology, 1999, 92/93: 329-334.
[12]Byrne G, Scholta E. Environmentally Clean Machining Processes-a Strategic Approach[J]. CIRP Annals-Manufacturing Technology, 1993, 42(1): 471-474.
[13]Wang Z Y, Rajurkar K P. Cryogenic Machining of Hard-to-cut Materials[J]. Wear, 2000, 239(2): 168-175.
[14]Hong S Y, Ding Y, Jeong W. Friction and Cutting Forces in Cryogenic Machining of Ti–6Al–4V[J]. International Journal of Machine Tools and Manufacture, 2001, 41(15): 2271-2285.
[15]Machai C, Biermann D. Machining of β-titanium-alloy Ti-10V-2Fe-3Al under Cryogenic Conditions: Cooling with Carbon Dioxide Snow[J]. Journal of Materials Processing Technology, 2011, 211(6): 1175-1183.
[16]Hong S Y, Markus I, Jeong W. New Cooling Approach and Tool Life Improvement in Cryogenic Machining of Titanium Alloy Ti-6Al-4V[J]. Inter. J. of Machine Tools & Manufacture, 2001,41: 2245-2260.
[17]Liu J Y, Han R D, Sun Y F. Research on Experiments and Action Mechanism with Water Vapor As Coolant and Lubricant in Green Cutting[J]. Inter. J. of Machine Tools & Manufacture, 2005,45: 687-694.
[18]Hong S Y, Ding Y. Cooling Approaches and Cutting Temperatures in Cryogenic Machining of Ti-6Al-4V[J]. Inter. J. of Machine Tools & Manufacture, 2001,41: 1417-1437.
[19]安庆龙,低温喷雾射流冷却技术及其在钛合金机械加工中的应用[D].南京:南京航空航天大学,2006.
[20]严鲁涛,袁松梅,刘强. 绿色切削高强度钢的刀具磨损及切屑形态[J].机械工程学报,2010,5(46): 187-192.
Yan Lutao, Yuan Songmei, Liu Qiang. Tool wear and Chip Formation in Green Machining of High Strength Steel[J].Journalof Mechanical Engineering, 2010, 5(46): 187-192.
|