Trajectory Planning and Simulation Analysis of Automatic Ultrasonic Testing for Large Rotary Parts

Abstract

Abstract:

Based on the investigation of the existing problems in traditional manually ultrasonic testing of large rotary parts, trajectory planning and movement law of testing system were researched herein, then the motion simulation of probe inspection trajectory was carried out.This paper discussed the principles of manually testing simulated by automatic testing, set the motion law of the axles and the probe, then planned the probe inspection trajectory. All of the automatic testing process was in line with the standards of non-destructive testing and the efficiency of testing was improved 5.46 times; Based on MATLAB and ADAMS software, the probe inspection trajectory was simulated, and the planning trajectory was realized. The research and results of the simulation demonstrate the feasibility of the automatic testing take the place of manually testing, and possesses theoretical direction significance for the similar trajectory planning in future.

Key words: large rotary part, automatic ultrasonic testing, trajectory planning, motion simulation

摘要：

针对目前大型回转件主要依靠传统手工探伤的种种缺陷,开展了自动化超声波探伤的轨迹规划与探伤系统运动规律的研究,并进行探头扫查轨迹运动仿真。阐述了自动化探伤模拟手工探伤的工艺原理,分析了工件、探头的运动规律,规划了探头扫查轨迹,整个自动化探伤工艺符合无损探伤国家标准,并将探伤效率提高了5.46倍;联合MATLAB和ADAMS软件对探头扫查轨迹进行仿真,仿真结果验证了轨迹规划的正确性。

关键词: 大型回转件, 自动化超声波探伤, 轨迹规划, 运动仿真

CLC Number:

TP23
TP273

Zeng Daxing, Shen Erqiang, Hou Yulei, Qiu Xuesong, Liu Jiaqi, Yao Jiantao, Zhao . Trajectory Planning and Simulation Analysis of Automatic Ultrasonic Testing for Large Rotary Parts[J]. China Mechanical Engineering, 2014, 25(19): 2557-2562.

曾达幸, 沈二强, 侯雨雷, 邱雪松, 刘佳启, 姚建涛, 赵永生, 周玉林 . 大型回转件自动超声波探伤轨迹规划及仿真分析[J]. 中国机械工程, 2014, 25(19): 2557-2562.

References

[1]常少文，杨彤. 钢管超声波自动探伤控制装置的研制与应用[J]. 焊管，2012，35(9)：51-56.
Chang Shaowen, Yang Tong. Development and Application of Ultrasonic Automatic Flaw Detection Control Device for Steel Pipe[J]. Welded Pipe and Tube, 2012，35(9)：51-56.
[2]Stubbs D, Fiscus I, Gasper D, et al. An Automated Ultrasonic System for Inspection of Aircraft Turbine Engine Components[J]. Insight, 2005, 47(3)：157-162.
[3]Rutten J. MuRi Aix Automated Ultrasonic Inspection Systems for New AIRBUS A380 Composite Glare Panels[C]//Proceedings of Aerospace Testing. Hamburg，2004:1-7.
[4]Haase W, Maurer A. Latest Developments on Industrial Ultrasonic Testing of Aircraft Components[C]//Proceedings of the World Conference on Non-Destructive Testing. Montreal，2004:1-7.
[5]Vesth L, Hansen P B, Kristensen W D.Robot System for Ultrasonic Examination of Complex Geometries[J]. NDT.net，1998, 3(7):26-29.
[6]吴秋轩，曹广益，刘呈则，等. 基于超声波串列扫查的自动扫查装置控制系统研究[J]. 中国机械工程，2005,16(3)：227-229.
Wu Qiuxuan, Cao Guangyi, Liu Chenze, et al. Research on Automatic Scan Device Control System Based on Tandem Scanning of Ultrasonic[J]. China Mechanical Engineering, 2005,16(3)：227-229.
[7]石增强，程洪杰，谢建，等. 大型圆筒件超声检测系统的设计[J].无损检测，2005,27(9)：475-478.
Shi Zengqiang, Cheng Hongjie, Xie Jian, et al. Design of Ultrasonic Testing System for Large Scale Columnar Device[J]. Nondestructive Testing, 2005, 27(9): 475-478.
[8]邓燕妮，朱小进，刘涛．基于OMAP5910的超声检测系统[J]. 仪表技术与传感器，2006(8)：37-38.
Deng Yanni, Zhu Xiaojin, Liu Tao. Ultrasonic Testing System Based on OMAP5910[J]. Instrument Technique and Sensor, 2006(8): 37-38.
[9]毛保全，刘新亮，汪凡，等. 基于ADAMS和MATLAB的遥控武器站机电联合仿真[J]. 兵工自动化, 2011, 30(8)：27-30.
Mao Baoquan，Liu Xinliang，Wang Fan，et al. Mechanical-electronic Co-simulation for Remote Weapon Station Based on ADAMS and MATLAB[J]. Ordnance Industry Automation, 2011, 30(8)：27-30.

[1]	RONG Yu, CHEN Gang, DOU Tianci, . A Multi Index Comprehensive Optimal Anti Impact Trajectory Planning Method [J]. China Mechanical Engineering, 2024, 35(02): 305-316.
[2]	WU Chaoqun, ZHAO Song, LEI Ting. Robot Welding Trajectory Planning and High Frequency Control for Curved Seams [J]. China Mechanical Engineering, 2023, 34(14): 1723-1728.
[3]	LIU Huailan, ZHAO Wenjie, LI Shizhuang, YUE Peng, MA Baorui. Construction Method of Virtual-real Drive Systems for Robots in Digital Twin Workshops [J]. China Mechanical Engineering, 2022, 33(21): 2623-2632.
[4]	LIU Liye, CHEN Yongliang, TANG Weili, WEI Yunpeng, SUO Shucan. Research on Open Control Systems and Tangent Tracking of Friction Stir Welding Machines [J]. China Mechanical Engineering, 2022, 33(16): 1948-1956.
[5]	SUN Xiaojun, SONG Daiping, LIN Jingzhou, HAN Weihang. Research and Implementation of Trajectory Planning Algorithm for Attacking Robots on Wind Tunnel [J]. China Mechanical Engineering, 2021, 32(16): 1963-1971.
[6]	LIU Zhiqiang1;GU Xianan1;GUO Hao1;XI Hao1;WANG Mingqiang1;LI Junli2. A Trajectory Planning Method for Automatic Placement of Carbon n Fiber Screw Propellers [J]. China Mechanical Engineering, 2020, 31(17): 2079-2084,2094.
[7]	HAN Fenglin1,3；LI Peng1,3；LI Minghui1,3；TIAN Liang2,3. Design and Motion Simulation of Variable Stiffness Bending Soft Actuators Driven by Granular Flow [J]. China Mechanical Engineering, 2020, 31(08): 890-897.
[8]	LIU Jicheng;JI Hongchao. Gait Planning Strategy for a New Type of Wheel-legged Robot [J]. China Mechanical Engineering, 2019, 30(18): 2257-2262.
[9]	CHEN Jie;DONG Wei;SHENG Xinjun;ZHU Xiangyang. Regional Trajectory Planning of Unmanned Aerial Vehicles Based on Spiral Spline [J]. China Mechanical Engineering, 2019, 30(12): 1453-1459.
[10]	LIU Liansheng1;WANG Min1;SUN Jinping2;WANG Hui1;DING Liping1 . Motion Simulation Technology for Automatic Drilling and Riveting Off-line Programming Systems [J]. China Mechanical Engineering, 2019, 30(04): 461-466.
[11]	LIU Hongjun1;WEI Yuxiang2. Tool Axis Trajectory Plannings for Flank Milling Based on AFS-PSO Hybrid Algorithm [J]. China Mechanical Engineering, 2018, 29(23): 2815-2820.
[12]	HAN Jiang;GU Taotao;XIA Lian;DONG Fangfang. Joint Trajectory Planning Algorithm for Industrial Robots Based on Mixed Interpolation [J]. China Mechanical Engineering, 2018, 29(12): 1460-1466.
[13]	MENG Xiangyan;GE Wenjie. Actuator Configuration of Optimal Motion Posture for Underactuated Hopping Robots [J]. China Mechanical Engineering, 2017, 28(15): 1765-1770.
[14]	Li Hongsheng, Wang Yunhe, Huang Jiacai, Shi Xinxin. Research on Trajectory Planning of Industrial Robots with Double Quaternion [J]. China Mechanical Engineering, 2016, 27(20): 2711-2716.
[15]	Gao Yi, Ma Guoqing, Yu Zhenglin, Cao Guohua. Kinematics Analysis of an 6-DOF Industrial Robot and Its 3D Visualization Simulation [J]. China Mechanical Engineering, 2016, 27(13): 1726-1731.