Design Parameter Optimization of Air Cushion Belt Conveyor Based on Comprehensive Energy Consumption

China Mechanical Engineering ›› 2014, Vol. 25 ›› Issue (14): 1872-1877.

Previous Articles Next Articles

Design Parameter Optimization of Air Cushion Belt Conveyor Based on Comprehensive Energy Consumption

Liu Jian;Guo Sheng;Qu Haibo

Beijing Jiaotong University,Beijing,100044

Online:2014-07-25 Published:2014-08-25
Supported by:
Program for New Century Excellent Talents in University of Ministry of Education of China（No. NCET-12-0769）;
Fundamental Research Funds for the Central Universities( No. 2013JBM013 )

基于综合能耗的悬浮式物料输送系统参数优化

刘建;郭盛;曲海波

北京交通大学,北京,100044

基金资助:
教育部新世纪优秀人才计划资助项目(NCET-12-0769);中央高校基本科研业务费资助项目(2013JBM013)

Abstract

Abstract:

The design parameters of air cushion belt conveyor were studied based on system comprehensive energy consumption. An intelligent experimental platform was developed. The data of the air chamber pressure and flow rate were collected, and the relationship between the air flow rate and the length of conveyor was obtained with the same air chamber pressure and load. Some experiments of different pore arrangements were completed, and a comprehensive energy consumption model of air cushion belt conveyor was put forward. The optimal running state and working point with full load were obtained. Further, the fan selection guide of the air cushion belt conveyor with arbitrary length was proposed.

Key words: air cushion belt conveyor, comprehensive energy consumption, optimization of design parameter, optimal working point, fan selection

摘要：

以综合能耗为优化目标研究了悬浮式物料输送系统的设计参数，搭建了智能实验平台，采集了不同长度下悬浮式物料输送系统的气室压力和供气流量，得出了气室压力和载荷一定时，供气流量与输送带长度的关系。完成了不同气孔排列方式下实验数据的采集，并提出了悬浮式物料输送系统的综合能耗模型。基于系统综合能耗对设计参数进行了优化，得到了满载条件下的最佳运行状态和最优工作点,提出了任意长度悬浮式物料输送系统的风机选型指导意见。

关键词: 悬浮式物料输送系统, 综合能耗, 设计参数优化, 最优工作点, 风机选型

CLC Number:

TH222

Liu Jian, Guo Sheng, Qu Haibo. Design Parameter Optimization of Air Cushion Belt Conveyor Based on Comprehensive Energy Consumption[J]. China Mechanical Engineering, 2014, 25(14): 1872-1877.

刘建, 郭盛, 曲海波. 基于综合能耗的悬浮式物料输送系统参数优化[J]. 中国机械工程, 2014, 25(14): 1872-1877.

References

[1]Cadafalch J，Perez-Segarra C D，Consul R，et al. Verification of Finite Volume Computations on Steady-state Fluid Flow and Heat Transfer[J]. Journal of Fluids Engeering,2002,124(1):11-21.
[2]Meng W J，Wang Z L. Testing and Optimum Designing for Special Fan Used by Air Cushion Belt Conveyor[C]//5th International Symposium on Test and Measurement.Shenzhen,Guangdong,2003:3163-3166.
[3]Li J F,Zhang S L.Optimization of Groove-hole Distribution with Equidistant and Unequal Diameter on Air-cushion Belt Conveyor[J]. Advanced Materials Research,2008,44/46:635-642.
[4]庞明军,张锁龙.气垫带式输送机气垫压力场研究与数值模拟[J].起重运输机械,2006(3):59-62.
Pang Mingjun，Zhang Suolong. Research and Numerical Simulation of Air Cushion Pressure Field on Air Cushion Belt Conveyor[J]. Journal of Hoisting and Conveying Machinery，2006(3)：59-62.
[5]巢建伟,庞明军,张锁龙.气垫带式输送机横向出流理论模型的研究[J].起重运输机械,2007(2):41-44.
Chao Jianwei,Pang Mingjun,Zhang Suolong.Air Cushion Belt Conveyor Transverse Flow Theory Model Research[J]. Journal of Hoisting and Conveying Machinery,2007(2)：41-44.
[6]庞明军. 气垫带式输送机气膜厚度理论研究[J]. 煤矿机械，2005(6)：46-49.
Pang Mingjun. Theory Research of Air Film Thickness on Air Cushion Belt Conveyor[J]. Coal Mine Machinery，2005(6): 46-49.
[7]庞明军,张锁龙,倪新跃,等.气垫带式输送机气垫流场理论基础与三维数值模拟[J].矿业研究与开发,2007,27(1)：49-52.
Pang Mingjun,Zhang Suolong，Ni Xinyao，et al.Theoretical Foundation of Air-cushion Flow Field and Its Three-dimensional Numerical Simulation for Air-cushion Belt Conveyor[J].Ming R & D,2007,27(1):49-52.
[8]庞明军，张锁龙，倪新跃，等. 气垫带式输送机气垫参数分布规律[J].江苏工业学院学报,2005,17(4):27-29.
Pang Mingjun,Zhang Suolong,Ni Xinyao,et al.Distributing Law of Air Cushion Parameter in Air Cushion Belt Conveyor[J]. Journal of Jiangsu Polytechnic University，2005，17(4):27-29.
[9]李剑锋，张锁龙，周寒秋. 气垫带式输送机气垫流场实验研究[J]. 煤矿机械，2009(3)：71:73.
Li Jianfeng，Zhang Suolong，Zhou Hanqiu. Air Cushion Belt Conveyor Air-cushion Flow Field Experimental Study[J]. Coal Mine Machinery，2009(3)：71-73.
[10]季新培,黄松元.气垫带式输送机形成均匀稳定气膜的布孔研究[J].连续输送技术,1992(3):18-29.
Ji Xinpei，Huang Songyuan. The Pore Distribution Research on Air Cushion Belt Conveyor Forming a Uniform and Stable Air Film[J]. Coal Mine Machinery,1992(3):18-29.
[11]薛河,付婷,刘艺.多排孔气垫带式输送机气垫流场动力学分析[J].起重运输机械,2009(3):64-67.
Xue He，Fu Ting,Liu Yi.The Air Cushion Field Dynamics Analysis of Air Cushion Belt Conveyor with Pores[J].Journal of Hoisting and Conveying Machinery,2009(3):64-67.
[12]李元科. 带式气垫输送机气膜承载能力的有限元分析[J].润滑与密封,2000(5):14-16.
Li Yuanke. FiniteElement Analysis on Gas Load-bearing Capacity of Belt Pneumatic Cushion Conveyor[J]. Lubrication Engineering,2000(5):14-16.
[13]黄学群. 运输机械设计选用手册[M]. 北京：化学工业出版社，1999.

Design Parameter Optimization of Air Cushion Belt Conveyor Based on Comprehensive Energy Consumption

基于综合能耗的悬浮式物料输送系统参数优化

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 1

Recommended Articles

Metrics