[1]Krapfenbauer H. New Aspects for the Mass Produc- tion of Spur Gears by Cold Rolling[J]. IPE Interna- tional Industrial :Production Engineering, 1984,89 (3) :39-41.
[2]Kurz N. Theoretical and Experimental Investiga- tions of the "Grob" Cold Shape- Rolling Process [C]//Twenty- fifth International Machine Tool Design and Research Conference. Birmingham, 1985:551-559.
[3]Zel]a L, Kahn J, Suzanne W. Finite Element Analysis of an Involute Spline[J]. Journal of Mechanical De- sign,2000,122(2) :239-244.
[4]徐永福.冷滚打花键动力学分析与仿真 [D].河南科技大学,2008:
[5]全建辉.基于ANSYS/LS-DYNA的花键冷滚轧成形机理研究[D].洛阳:河南科技大学,2007.
[6]李言[1],杨明顺[1],李玢[1],李淑娟[1],袁启龙[1].丝杠冷滚打成形动力学仿真及分析[J].西安理工大学学报,2009,25(4):383-387.
[7]张璐[1],杨明顺[1],李言[1],袁启龙[1].高速冷滚打过程变形力解析方法及其修正[J].塑性工程学报,2011,18(5):1-7.
[8]张璐[1],李言[1],杨明顺[1],李玢[1].丝杠冷滚打成形过程金属流动规律研究[J].中国机械工程,2012,23(13):1623-1628.
[9]崔凤奎[1],郭超[1],李玉玺[2].40Cr钢的塑性流动应力特征及本构关系[J].河南科技大学学报:自然科学版,2012,33(6):1-5.
[10]Merking H, Kocks U F. Kinetics of Flow and Strain- Hardening[J]. Acta Metallurgic, 1981,29 (11) : 1865-1875.
[11]El-Danaf E A,Soliman M S, Almajid A A. Effect of Solution Heat Treatment on the Hot Work- ability of A1- Mg- Si Alloy[J]. Materials and Manufacturing Processes,2009,6(24) :637-643.
[12]Mecking H, Kocks U F. Kinetics of Flow and Strain-hardening[J]. Acta Meta, 1981,29 ( 11 ) : 1865-1875.
[13]Estrin Y. Unified Constitutive Laws of Plastic De- formation[M]. New York: Academic Press, 1996.
[14]贾仁需[1],张玉明[1],张义门[1],郭辉[1].XRD法计算4H—SiC外延单晶中的位错密度[J].光谱学与光谱分析,2010(7):1995-1997.
[15]张纪才[1],王建峰[2],王玉田[1],杨辉[1].In源流量与Ⅲ族流量之比对InGaN/GaN多量子阱性质的影响[J].物理学报,2004,53(8):2467-2471. |