#br#
Research on Optimized Model of Development Cycle and R&D Team Communication Strategies and Its Application to Complex Product

Abstract

Abstract:

The paper put forward a Markov chain model to compute R&D iteration time.And total development cycle,cost model and frequent information exchange model were constructed considering R&D team communication costs.Then,optimal product development cycle and communication strategies were analyzed.The cost of team communication was taken into account and product R&D process was described in the model.Finally,an example was given to verify the model.

Key words: complex product, Markov chain, R&, D team communication, optimization

摘要：

利用马尔可夫链建立了复杂产品研发迭代的时间计算模型,构建了研发总成本、研发时间和团队交流次数数学模型,分析得出了最优研发时间及研发团队交流策略，该模型考虑了团队交流成本，准确描述了复杂产品研发过程。应用案例验证了模型的实用性和有效性。

关键词: 复杂产品, 马尔可夫链, 研发团队交流, 优化

CLC Number:

F224.32

GU Jun-1, 2, ZHANG Zhuo-1. #br# Research on Optimized Model of Development Cycle and R&D Team Communication Strategies and Its Application to Complex Product[J]. China Mechanical Engineering, 2013, 24(15): 2030-2035.

贾军1, 2, 张卓1. 复杂产品研发时间和研发团队交流优化模型及其应用研究[J]. 中国机械工程, 2013, 24(15): 2030-2035.

References

[1]Magnus Persson, Par Ahlstr6m. Managerial Issues in Modularising Complex Produets[J]. Teehnovation,2006,26(11) :1201-1209.
[2]Danilovic M, Browning T R. Managing Complex Product Development Projects with Design Structure Matrices and Domain Mapping Matriees [J]. International Journal of Project Management, 2007, 25(3) :300-314.
[3]Closs D J,Jacobs M A,Swink M, et al. Toward a Theory of Competencies for the Management of Product Complexity:Six Case Studies[J]. Journal of Operations Management, 2008,36 (1) : 345-366.
[4]陈占夺[1].基于知识管理的制造业复杂产品研发团队研究[J].科学学研究,2006,24(5):763-768.
[5]Joglekar N R,Yassine A A,Eppinger S D,et al. Performance of Coupled Product Development Activities with a Deadline[J]. Management Science, 2001, 47 (12): 1605-1620.
[6]Ford D N,Sterman J D. Overcoming the 90% Syndrome:Iteration Management in Concurrent Development Projects [J]. Concurrent Engineering: Research and Applications, 2003,11 (3) : 177-186.
[7]Smith R P, Eppinger S D. Identifying Controlling Features of Engineering Design Iteration[J]. Management Science,1997,43(3) :276-293.
[8]Smith R P, Eppinger S D. A Predictive Model Se- quential Iteration in Engineering Design[J]. Management Science, 1997,43(8):1104-1119.
[9]Loch C H, Terwiesch C. Communication and Uncer- tainty in Concurrent Engineering [J]. Management Science, 1998,44 (8): 1032-1048.
[10]Patrashkova- Volzdoska R, McComb S A, Green S G, et al. Examining a Curvilinear Relationship Be- tween Communication Frequency and Team Per- formanee in Cross-functional Proiect teams[J]. IEEE Transactions on Engineering Management, 2003,50(3) :262-269.
[11]Carrillo J E,Franza R M. Investing in Product Development and Production Capabilities:the Crucial Linkage between Time-to-market and Ramp- up Time[J]. European Journal of Operational Research, 2006, 171 (2) : 536-556.
[12]Roemer T A,Ahmadi R,Wang R H. Time-cost Trade-offs in Overlapped Product Development [J]. Operations Research, 2000,48(6): 858-865.
[13]Roemer T A, Ahmadi R. Concurrent Crashing and Overlapping in Product Development[J]. Operations Research, 2004,52(4): 606-622.
[14]Lin J,Chai K H,Wong Y S,et al. A Dynamic Model for Managing Overlapped Iterative Product Development[J]. European Journal of Operational Research, 2008,185 (1): 378-392.
[15]Terwiesch C, Loch C H,de Meyer A. Exchanging Preliminary Information in Concurrent Engineer- ing: Alternative Coordination Strategies[J]. Organization Science,2002,13(4) :402-419.
[16]Hansen M. Knowledge Networks: Explaining Effective Knowledge Sharing in Muhiunit Companies [J]. Organization Science, 2002,13 (3) : 232-248.
[17]Gumbel P. Trying to Untangle Wires[J]. Time, 2006,8: 36-37.
[18]Sosa M E,Eppinger S D,Rowles C M. The Misalignment of Product Architecture and Organizational Structure in Complex Product Development [J]. Management Science, 2004, 50 (12): 1674 - 1689.
[19]Sosa M. A Structured Approach to Predicting and Managing Technical Interactions in Software Development[J]. Research in Engineering Design, 2008,19(1) :47-70.
[20]Gokpinar B, Hopp W J ,Iravani S M R. The Impact of Misalignment of Organizational Structure and Product Architecture on Quality in Complex Prod- uct Development [J]. Management Science, 2010, 56(3) :468-484.
[21]马文建[1],刘伟[1],李传昭[1].并行产品开发中设计活动间重叠与信息交流[J].计算机集成制造系统,2008,14(4):630-636.
[22]Lin J, Chai K H, Brombacher A C, et al. Optimal Overlapping and Functional Interaction in Product Development[J]. European Journal of Operational Research,2009,196(3) : 1158-1169.
[23]Lin J, Qian Y J,Cui W T, et al. Overlapping and Communication Policies in Product Development [J]. European Journal of Operational Researeh, 2010,201 (3) : 737-750.
[24]Eppinger S D, Whitney D E, Smith R P, et al. A Model-based Method for Organizing Tasks in Product Development[J]. Research in Engineering Design, 1994,6(1) : 1-13.
[25]Yassine A A. An Introduction to Modeling and An- alyzing Complex Product Development Process Using the Design Structure Matrix Method[J]. Quaderni di Management(Italian Management Review), 2004,9 : 8-9.
[26]Bhat U N. Elements of Aied Stochpplastie Processes[M]. New York : Wiley, 1984 : 70-82.
[27]Bhuiyan N, Gerwin D, Thomson V. Simulation of the New Product Development Process for Per- formance Improvement[J]. Management Science, 2004,50(12) : 1690-1703.
[28]Adler P S. Interdepartmental Interdependence and Coordination:the Case of the Design/Manufacturing Interface [J]. Organization Science, 1995, 6 : 147-167.

#br# Research on Optimized Model of Development Cycle and R&D Team Communication Strategies and Its Application to Complex Product

复杂产品研发时间和研发团队交流优化模型及其应用研究

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

[1]	LI Meng-Lei, GU Yo-Qin, ZHANG Hua-Liang, LIU Li-Qin, DU Juan, WEN Chu-Hua, LAN Guo-Sheng. Parallel Mechanism Structure Optimization Design Based on Multi-objective Differential Evolution Algorithm [J]. J4, 201016, 21(16): 1915-1920.
[2]	LU Kai-Jiang, SHI Dun-Beng, ZHANG Feng-Chao. Dynamics Optimization Design of Planar 3-DOF Parallel Mechanism [J]. J4, 201016, 21(16): 1926-1931.
[3]	LIANG Chu-Bao, ZHANG Pei-Lin, CAO Jian-Jun, LIN Guo-Quan. A Denoising Method of Lifting Wavelet Package Gradual Changing Threshold Based on Ant Colony Optimization [J]. J4, 201016, 21(16): 1964-1969.
[4]	ZHANG Xi-Ning, DIAO Meng, WEN An-Rui. A Multi-objective Optimization Method for Holo-balancing Weights of Rotor Set [J]. J4, 201016, 21(16): 1974-1977.
[5]	LI Xixing, YANG Daoming, LI Xin, WU Rui, . Flexible Job Shop AGV Fusion Scheduling Method Based on HGWOA [J]. China Mechanical Engineering, 2021, 32(08): 938-950，986.
[6]	LIU Feng, ZHAO Yankai, YAO Jingzheng, WANG He. Multidisciplinary Optimization of Submersibles Based on Parametric Analysis of Main Body#br# [J]. China Mechanical Engineering, 2021, 32(08): 997-1007.
[7]	WENG Jian, ZHUANG Kejia, PU Donglin, DING Han, . Plunge Milling of Titanium Alloys Based on Machine Learning and Multi-objective Optimization [J]. China Mechanical Engineering, 2021, 32(07): 771-777.
[8]	NI Hengxin, YAN Chunping, CHEN Jianlin, HOU Yuehui, CHEN Liang. Multi-objective Optimization and Decision-making Method of High Speed Dry Gear Hobbing Processing Parameters [J]. China Mechanical Engineering, 2021, 32(07): 832-838.
[9]	ZHANG Jing, CHENG Feifei, SONG Baolin, LIU Zhigang, ZHANG Weihua. Multidisciplinary Design Optimization of High-speed Pantograph Based on Collaborative Optimization Algorithm [J]. China Mechanical Engineering, 2021, 32(04): 490-498.
[10]	YI Yongsheng1,2;LI Wei1;GAO Liang1;XIAO Mi1;QIU Haobo1. CMSO for Multidisciplinary Design Optimization Method [J]. China Mechanical Engineering, 2021, 32(01): 12-17.
[11]	LIU Tao;ZHANG Lifang. Parameter Solution of Instantaneous Milling Force Model of Variable Cross-section Scroll Plates Based on Improved PSO Algorithm [J]. China Mechanical Engineering, 2020, 31(24): 2943-2949.
[12]	ZHAO Baolin1,2;LI Bo1,2;XIA Rui1,2;WANG Xuewen1,2;WANG Yun3. Experimental Study of Bionic Wear Resistance Optimization for Middle Plates in Scraper Conveyors [J]. China Mechanical Engineering, 2020, 31(24): 3006-3015.
[13]	ZHANG Dazhi, GUAN Mingsheng, ZHANG Qingdong, WANG Aiguo, ZHOU Xinliang. Simulation of Deformation Behaviors and Laws of Steel Pipes in Rolling Processes of Retained Mandrel Pipe Mills [J]. China Mechanical Engineering, 2020, 31(22): 2691-2698.
[14]	LIU Feng, , LI Jiquan, PENG Xiang, JIANG Shaofei. Optimization of RHCM Mould Electric Heating Systems for Constrainted Heating Pipe Layout [J]. China Mechanical Engineering, 2020, 31(22): 2699-2707.
[15]	LI Ming, DAI Peipei, CHANG Zhidong, CHEN Jun, . Springback Control and Compensation of Incremental Forming for Sheet Metal Parts with Open Geometric Feature [J]. China Mechanical Engineering, 2020, 31(22): 2723-2727.