Design Method of NC-EDM Electrode for Components with Closed Complex Flow Channel

China Mechanical Engineering ›› 2012, Vol. 23 ›› Issue (20): 2430-2433.

Previous Articles Next Articles

Design Method of NC-EDM Electrode for Components with Closed Complex Flow Channel

Wu Yannong1;Zhao Jianshe1;Tang Lanjian1;Liu Chen2

1.Nanjing University of Aeronautics and Astronautics,Nanjing,210016
2.Institute of Plasma Physics Chinese Academy of Sciences,Hefei,230031

Online:2012-10-25 Published:2012-11-01
Supported by:
Aviation Science Foundation of China（No. 011ZE52055）

闭式复杂流道类零件数控电火花加工电极设计

吴彦农1;赵建社1;唐兰剑1;刘辰2

1.南京航空航天大学,南京,210016
2.中国科学院等离子体物理研究所,合肥,230031

基金资助:
航空科学基金资助项目（011ZE52055）；青年科技创新基金资助项目（NS2012012）
Aviation Science Foundation of China（No. 011ZE52055）

Abstract

Abstract:

Taking the flow channel in a closed integral impeller processing by numerically controlled electrical discharge machining (NC-EDM) for instance, by analyzing manufacturability of the flow passage among the impeller and machining areas partition, a method of electrode design was presented based on equal discharging gap hypothesis as well as its machining moving path with method for reducing the processing errors caused by electrode orbiting discussed. This method for designing electrodes was proposed by employing CAD/CAM module of Unigraphics redevelopment, whose feasibility was verified on a four-axis NC-EDM machine by trial-manufacturing a closed integral impeller with complex flow passage.

Key words: three-dimensional flow channel, electrical discharge machining(EDM), electrode design, numerical control(NC)

摘要：

以某型三元流闭式整体叶轮叶间流道的数控电火花加工为例，分析其复杂闭式流道的可加工性，继而进行工具电极及其加工运动轨迹设计，并探讨了减小因摇动补偿造成加工误差的方法。以UG二次开发的CAD/CAM模块为设计工具，提出一种新的工具电极设计方法，并在四轴联动数控电火花加工机床上完成了具有闭式复杂流道零件的加工试制，验证了设计方法的可行性。

关键词: 三元流道, 电火花加工（EDM）, 电极设计, 数控（NC）

CLC Number:

V261.6

TUN Pan-Nong-1, DIAO Jian-She-1, TANG Lan-Jian-1, LIU Chen-2. Design Method of NC-EDM Electrode for Components with Closed Complex Flow Channel[J]. China Mechanical Engineering, 2012, 23(20): 2430-2433.

吴彦农1, 赵建社1, 唐兰剑1, 刘辰2. 闭式复杂流道类零件数控电火花加工电极设计[J]. 中国机械工程, 2012, 23(20): 2430-2433.

[1]	JIA Zhixin, ZHANG Kaiyue, WANG Jin. Study on EDM of PCD by Mixing Iron Powders [J]. China Mechanical Engineering, 2023, 34(22): 2684-2692.
[2]	YOU Zhongtong1;WANG Taiyong1;LIU Qingjian2;XIN Quanqi1. A Fitting Algorithm Based on Least Square Method and Spiral for Discrete Points [J]. China Mechanical Engineering, 2018, 29(20): 2502-2506,2514.
[3]	YU Jianwu;HU Qifeng;WEN Cheng;LIU Bo;SHEN Xiang. Prediction Model of Surface Roughness of 8418 Steel by EDM Based on SVM [J]. China Mechanical Engineering, 2018, 29(07): 771-774,793.
[4]	LI Zhiyong, LI Li, ZHENG Guangming. Fabrication and Corrosion Resistance of Copper Electroforming Layers on Tube Electrodes in EDM Processes for Turbine Blade Cooling Holes [J]. China Mechanical Engineering, 2017, 28(10): 1195-1201,1214.
[5]	Zhou Xujiao, Zhao Jianshe, Chu Huisheng, Chen Yang. Research on High Efficiency EDM Process of Integral Bling with Grouped Electrodes [J]. China Mechanical Engineering, 2016, 27(18): 2453-2457,2466.
[6]	Zhang Haifeng, Wang Lifeng, Liu Jianyong. Experimental Study of EDM Pulse Generator for Small Hole Machining [J]. China Mechanical Engineering, 2016, 27(13): 1735-1739,1789.
[7]	Huang Yuping. Study on Precision Micro EDM of Torsion Bar Arc Grooves [J]. China Mechanical Engineering, 2016, 27(11): 1446-1450.
[8]	Tang Haofeng, Cao Mingrang, Yang Shengqiang, Li Wenhui, Li Weidong. Dispersant Performance on TC4 in Small Hole EDM [J]. China Mechanical Engineering, 2016, 27(02): 235-239.
[9]	Pan Huijun, Liu Zhidong, Qiu Mingbo, Tian Zongjun. Study on Climbing Type Current Phenomenon in EDM of Semiconductors [J]. China Mechanical Engineering, 2014, 25(13): 1773-1778.
[10]	SONG Jia-Jie, QIU Meng-Bei, LIU Zhi-Dong, TIAN Zong-Jun. Research on Influence of Electric-Feeder-Termination-Discharge on Contact Resistance in EDM of Silicon [J]. China Mechanical Engineering, 2013, 24(13): 1796-1799.
[11]	CHEN Wen-An, LIU Zhi-Dong, WANG Xiang-Zhi, WANG Fu-Zhi. Fundamental Study of Forming by Controllable Spark-induced Combustion and EDM Finishing [J]. China Mechanical Engineering, 2013, 24(13): 1777-1782.
[12]	WANG Xu-Ti, HU Hui, LIANG Yan-De, XU Wen-Ji. Finite Element Simulation of Small-hole on Titanium Alloy Drilled by EDM [J]. China Mechanical Engineering, 2013, 24(13): 1738-1742,1748.
[13]	LIU Zhi-Dong, CAO Yin-Feng, QIU Meng-Bei, TIAN Zong-Jun, HUANG Yin-Hui. Research on Influence of Different Conduction Modes on EDM of High Resistivity Semiconductor Silicon [J]. China Mechanical Engineering, 2012, 23(6): 725-728.
[14]	CAO Yin-Feng, LIU Zhi-Dong, QIU Meng-Bei, TIAN Zong-Jun, HUANG Yin-Hui. Study on Vibrating EDM of Deep Micro-hole on High Resistance Silicon [J]. China Mechanical Engineering, 2011, 22(7): 767-771.
[15]	LI Jian-Zhong, CHEN Fei-Hu, YAN Guo-Jiang, TU Jie-Yuan. Study on Influences of Grain Boundary and Grain on Machining Performance of Micro-EDM [J]. China Mechanical Engineering, 2011, 22(13): 1601-1604.

Design Method of NC-EDM Electrode for Components with Closed Complex Flow Channel

闭式复杂流道类零件数控电火花加工电极设计

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics