Simulation of Automobile EHB Hydraulic Control Based on Generalized Predictive Control

China Mechanical Engineering ›› 2011, Vol. 22 ›› Issue (23): 2887-2892.

Previous Articles Next Articles

Simulation of Automobile EHB Hydraulic Control Based on Generalized Predictive Control

Wang Qidong1,2;Huang He1;Chen Wuwei1;Liu Xiangyu1

1.Hefei University of Technology,Hefei,230009

2.Anhui University of Science and Technology,Huainan,Anhui,232001

Online:2011-12-10 Published:2011-12-20
Supported by:
National Natural Science Foundation of China（No. 51175135，51075112）

基于广义预测控制的汽车EHB压力控制仿真研究

王其东1,2;黄鹤1;陈无畏1;刘翔宇1

1.合肥工业大学，合肥，230009

2.安徽理工大学，淮南，232001

基金资助:
国家自然科学基金资助项目(51175135，51075112)
National Natural Science Foundation of China（No. 51175135，51075112）

Abstract

Abstract:

In order to set up a hydraulic model of EHB system precisely, AMESim and Simulink were both used considering the dead zone and saturation properties of high-speed solenoid. Then a predictive model was developed by system identification.A hydraulic controller was designed based on GPC theory.The simulations of wheel cylinder pressure control test and anti-lock brake tests show that the GPC controller is feasible and effective even when the parameters of hydraulic system are time-varying.Compared to traditional PID controller,the designed controller can further improve the brake performance. 

Key words: generalized predictive control(GPC), electro-hydraulic brake(EHB) system, co-simulation, system identification

摘要：

在考虑高速开关电磁阀饱和和死区效应等因素的基础上，联合AMESim与Simulink仿真软件建立电子液压制动(electro-hydraulic brake system,EHB)液压系统仿真模型。通过系统辨识获得了预测模型，在广义预测控制理论基础上设计了制动压力控制器。为了验证该控制器的工作性能，进行了基于EHB系统的轮缸压力控制仿真实验和汽车防抱死制动仿真实验。结果表明：在系统参数时变的情况下应用该算法是可行有效的，该控制算法较一般的PID控制进一步提高了汽车的制动性能。

关键词:

广义预测控制, 电子液压制动系统, 联合仿真, 系统辨识

CLC Number:

U461.6

WANG Ji-Dong-1, 2, HUANG He-1, CHEN Mo-Wei-1, LIU Xiang-Yu-1.

Simulation of Automobile EHB Hydraulic Control Based on Generalized Predictive Control

[J]. China Mechanical Engineering, 2011, 22(23): 2887-2892.

王其东1, 2, 黄鹤1, 陈无畏1, 刘翔宇1.

基于广义预测控制的汽车EHB压力控制仿真研究

[J]. 中国机械工程, 2011, 22(23): 2887-2892.

[1]	HANG Yang, YAN Kanghao, HUANG Dan. Analyses of Friction and Sealing Characteristics of Piston/Bushing Interfaces Considering Elastic Deformations#br# [J]. China Mechanical Engineering, 2023, 34(01): 17-26.
[2]	WANG Feixue1,2;YAO Jing1;HU Futai1,2;ZHENG Yongjiang1,2;ZANG Xinliang1,2. Mechanical-hydraulic Co-simulation of Vibration Characteristics for Forging Hydraulic Presses [J]. China Mechanical Engineering, 2020, 31(10): 1175-1182,1189.
[3]	CHEN Ziming1,2;XUE Zhigang1,2;ZHANG Song3;LI Luoxing1,2. Closing Effort Analysis of Sliding Doors Based on Co-simulation of ADAMS and Simulink [J]. China Mechanical Engineering, 2020, 31(08): 924-930.
[4]	SUN Minghan;XU Zhe;ZHENG Likang;XU Zhiqiang;DU Fengshan. Optimization of Twin-roll Thin Strip Vibrating Casting Screw-down Control Systems Based on Improved PSO Algorithm [J]. China Mechanical Engineering, 2020, 31(03): 360-366.
[5]	QIU Shaolin;QIAN Lijun;LU Jianhui. Research on AVPS Based on Scenario Driven and Hierarchical Planning [J]. China Mechanical Engineering, 2019, 30(19): 2364-2371.
[6]	ZHANG Zhigang;YU Xiaoxia;ZHENG Yanjie;LI Teng. Modeling, Simulation and Tests of Friction Characteristics for Synchronizers [J]. China Mechanical Engineering, 2019, 30(07): 825-831.
[7]	TANG Youming1;LOU Yuanbo1，2;CHEN Ji2;LI Zhihong1;CHEN Yi2;HUANG Qiuping2;YUAN Zhiqun1. 1D/3D Co-simulation and Improvements of Thermal Management for SUV Engine Compartments [J]. China Mechanical Engineering, 2019, 30(05): 608-614,629.
[8]	QIAN Donghai;HUANG Youxin;DONG Xiaokang;WU Peng. Research on Tracking Control for Robot Manipulator Based on Fast Terminal Sliding Mode Method [J]. China Mechanical Engineering, 2017, 28(18): 2237-2241.
[9]	Chen Keji, Guo Xuexun, Pei Xiaofei. Rollover Warning of Commercial Vehicles Based on Multiple Condition Matching [J]. China Mechanical Engineering, 2016, 27(20): 2822-2827.
[10]	Peng Xiaoyan, Lü Yibin, He Lei. Research on Brake-force Distribution Strategies for Brake-by-wire System Based on Slip Ratio [J]. China Mechanical Engineering, 2016, 27(17): 2407-2412.
[11]	Qiu Xuesong, Xiao Chao, Tan Houjin, Hou Yulei, Zhou Yulin. Multi-software Co-simulation for a Large Robotic Automatic Stamping Production Line [J]. China Mechanical Engineering, 2016, 27(06): 772-777.
[12]	Cao Xuyang, Cao Linlin, Wang Dianlong. Exact Linearization and Feedback Control of Semi-activeConnected Hydro-pneumatic Suspension [J]. China Mechanical Engineering, 2016, 27(04): 560-567.
[13]	Guo Jianzhong, Luo Renhong, Wang Zhifeng, Hu Li, Wu Yong. Test and 1D/3D Co-simulation of Thermal Management for a Commercial Vehicle Engine Compartment [J]. China Mechanical Engineering, 2016, 27(04): 526-530.
[14]	Liu Xiang, Liu Bo, Long Zizhao, Gao Yu. Research on Steering Characteristics in New-energy Mining Car Based on Bekker Theory [J]. China Mechanical Engineering, 2014, 25(24): 3397-3402.
[15]	Zhao Zhiguo, Wu Xiaowei. Design and Performance Simulation of Variable Volume HCU [J]. China Mechanical Engineering, 2014, 25(21): 2968-2974.

Simulation of Automobile EHB Hydraulic Control Based on Generalized Predictive Control

基于广义预测控制的汽车EHB压力控制仿真研究

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics